FCC ID QHYRPM-A5A11-B12
OneCell Radio Point
by CommScope Technologies LLC
Grantee Code: QHY Product Code: RPMA5A11B12
Latest application date: 2021-06-09
FCC ID Device Details
| FCC ID | QHYRPM-A5A11-B12 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QHY |
| Product Code | RPMA5A11B12 |
| Applicant Business | CommScope Technologies LLC 🇺🇸 |
| Related Domains |  commscope.com |
| Equipment Class | OneCell Radio Point |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 731.5-743.5 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-09 |
| 731.5-743.5 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-03 |
| 731.5-743.5 MHz | Original Equipment | 2020-01-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 4.0_OneCell_HW_Install_M0300A2_RP5000_Rev.4.0.11-Part1of2.pdf | Users Manual | 2020-07-19 | PDF 4.1 MB |
| 4.0_OneCell_HW_Install_M0300A2_RP5000_Rev.4.0.11-Part2of2.pdf | Users Manual | 2020-07-19 | PDF 4.2 MB |
| Internal Photos | Internal Photos | 2021-08-02 | PDF 611.8 KB |
| Internal Photos | Internal Photos | 2021-06-09 | PDF 942.5 KB |
| Internal photos - B12 - module.pdf | Internal Photos | 2020-07-19 | PDF 215.6 KB |
| External Photos | External Photos | 2021-08-02 | PDF 843.4 KB |
| External Photos | External Photos | 2021-06-09 | PDF 424.8 KB |
| External photos - module.pdf | External Photos | 2020-07-19 | PDF 423.2 KB |
| Label location.pdf | ID Label/Location Info | 2020-01-21 | PDF 142.4 KB |
| Label sample_7832925-6 Band 12 label RM.pdf | ID Label/Location Info | 2020-01-21 | PDF 805.8 KB |
| Test Setup Photos | Test Setup Photos | 2021-08-02 | PDF 357.3 KB |
| Test Setup Photos | Test Setup Photos | 2021-06-09 | PDF 231.5 KB |
| Test setup photos.PDF | Test Setup Photos | 2020-07-19 | PDF 586.9 KB |
| Test Report | Test Report | 2021-06-09 | PDF 1.2 MB |
| Test Report | Test Report | 2021-02-03 | PDF 343.6 KB |
| Test report_FCC_RF Exposure_LT19092001-CMM-001B12B17 Rev_2.0_MPE.pdf | RF Exposure Info | 2020-01-21 | PDF 298.1 KB |
| Test report_RF_FCC_LT19092001-CMM-001B12B17 Rev_6.0.pdf | Test Report | 2020-01-21 | PDF 2.5 MB |
| Declaration letter_no_tune_up_letter_RPM-A5A11-B12.pdf | Attestation Statements | 2020-01-21 | PDF 782.7 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2021-06-09 | PDF 188.9 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2021-06-09 | PDF 141.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2021-02-03 | PDF 88.1 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2021-02-03 | PDF 81.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2021-02-03 | PDF 87.5 KB |
| Confidentiality Letter_RPM-A5A11-B12.pdf | Cover Letter(s) | 2020-01-21 | PDF 503.3 KB |
| Cover letter_Agent Authorization Letter.pdf | Cover Letter(s) | 2020-01-21 | PDF 198.6 KB |
| Cover letter_Limited Modular Approval Request_RPM-A5A11-B12.pdf | Cover Letter(s) | 2020-01-21 | PDF 405.9 KB |
| RF Exposure | RF Exposure Info | 2021-06-09 | PDF 448 KB |
| Block diagram_Radio-Block-Diagram Band 12-14-17.pdf Metadata only | Block Diagram | PDF 305 KB | |
| Schematics_Circuit diagram PCB P4257 Band12.pdf Metadata only | Schematics | PDF 1.4 MB | |
| Schematics_Radio Board Bands 12-14-17 7838646-00_Assembly drawing.pdf Metadata only | Schematics | PDF 1.2 MB | |
| Operational Description Change 1 Metadata only | Operational Description | PDF 557.5 KB | |
| Operational Description Change 2 Metadata only | Operational Description | PDF 523.3 KB | |
| Operational description_OneCell-NGRP-Radio-FCC-RFQ Band 12.pdf Metadata only | Operational Description | PDF 1.1 MB | |
| Parts list_BOM_OneCell, Radio Band 12, Indoor, NGRP.pdf Metadata only | Parts List/Tune Up Info | PDF 252.1 KB |
Application Information
| Application ID | TSvPhbQfFtn16gTFgcm1RA== |
|---|---|
| Final Action Date | 2021-06-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024704082 |
| Model | RPM-A5A11-B12 |
| Frequency Range | 731.5-743.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | OneCell Radio Point |
| Responsible Party | Kevin Craig, Consulting Engineer, kevin.craig@commscope.com , 978-614-3182 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | certification@bureauveritas.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add host model OneCell RP5200 Base Band Module. Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TSvPhbQfFtn16gTFgcm1RA== | 2021-06-09 | Class II permissive change or modification of presently authorized equipment |
| sXOwj53azEI/jyT2s8Dnlw== | 2021-02-03 | Class II permissive change or modification of presently authorized equipment |
| psZizGxwoQZ+Zd+VNHT6pQ== | 2020-01-21 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 731.5-743.5 MHz | 0.4688 | 0.23ppm | 4M49W7D | 27 | MO, PF |
| 734-741 MHz | 0.4688 | 0.23ppm | 8M94G7D | 27 | MO, PF |
| 734-741 MHz | 0.4645 | 0.23ppm | 8M94W7D | 27 | MO, PF |
| 736.5-738.5 MHz | 0.4436 | 0.23ppm | 13M4G7D | 27 | MO, PF |
| 736.5-738.5 MHz | 0.4395 | 0.23ppm | 13M4W7D | 27 | MO, PF |
| 736.5-743.5 MHz | 0.4519 | 0.23ppm | 4M47G7D | 27 | MO, PF |
| 736.5-738.5 MHz | 0.4519 | 0.23ppm | 4M47G7D | 27 | MO, PF |
| 736.5-743.5 MHz | 0.4488 | 0.23ppm | 4M48W7D | 27 | MO, PF |
| 736.5-738.5 MHz | 0.4488 | 0.23ppm | 4M48W7D | 27 | MO, PF |
| 740 MHz | 0.4446 | 0.23ppm | 8M93W7D | 27 | MO, PF |
| 740 MHz | 0.4446 | 0.23ppm | 8M92G7D | 27 | MO, PF |
Grants
TCB Grant - Application TSvPhbQfFtn16gTFgcm1RA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/09/2021 Application Dated: 06/04/2021 |
| CommScope Technologies LLC |
| Cross Point Tower |
| 900 Chelmsford Street |
| Lowell, MA 01851 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| C2PC to add host model OneCell RP5200 Base Band Module. Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
EAS Grant - Application TSvPhbQfFtn16gTFgcm1RA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CommScope Technologies LLC Cross Point Tower 900 Chelmsford Street Lowell, MA 01851 United States |
Date of Grant: 06/09/2021 Application Dated: 06/04/2021 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| C2PC to add host model OneCell RP5200 Base Band Module. Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/03/2021 Application Dated: 02/02/2021 |
| CommScope Technologies LLC |
| Cross Point Tower |
| 900 Chelmsford Street |
| Lowell, MA 01851 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| C2PC Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
EAS Grant - Application sXOwj53azEI/jyT2s8Dnlw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CommScope Technologies LLC Cross Point Tower 900 Chelmsford Street Lowell, MA 01851 United States |
Date of Grant: 02/03/2021 Application Dated: 02/02/2021 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| C2PC Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/21/2020 Application Dated: 01/21/2020 |
| CommScope Technologies LLC |
| Cross Point Tower |
| 900 Chelmsford Street |
| Lowell, MA 01851 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 743.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 743.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
EAS Grant - Application psZizGxwoQZ+Zd+VNHT6pQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
CommScope Technologies LLC Cross Point Tower 900 Chelmsford Street Lowell, MA 01851 United States |
Date of Grant: 01/21/2020 Application Dated: 01/21/2020 |
| Attention: Kevin Craig , Consulting Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QHYRPM-A5A11-B12 |
| Name of Grantee: | CommScope Technologies LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | OneCell Radio Point |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO PF | 27 | 731.5 - 743.5 | 0.4571 | 0.23 PM | 4M48G7D |
| MO PF | 27 | 731.5 - 743.5 | 0.4688 | 0.23 PM | 4M49W7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4688 | 0.23 PM | 8M94G7D |
| MO PF | 27 | 734.0 - 741.0 | 0.4645 | 0.23 PM | 8M94W7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4436 | 0.23 PM | 13M4G7D |
| MO PF | 27 | 736.5 - 738.5 | 0.4395 | 0.23 PM | 13M4W7D |
| MO PF | 27 | 736.5 - 743.5 | 0.4519 | 0.23 PM | 4M47G7D |
| MO PF | 27 | 736.5 - 743.5 | 0.4488 | 0.23 PM | 4M48W7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M92G7D |
| MO PF | 27 | 740.0 - 740.0 | 0.4446 | 0.23 PM | 8M93W7D |
| Output power is maximum combined ERP. Limited Modular Approval limited to specific host device OneCell RP5100 Base Band Module. This module is approved for mobile and fixed use with respect to RF exposure compliance. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into other products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b) (3). |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| PF: | Transmitter approved for Public Safety Broadband |
| Mail To: |