FCC ID QI2-EMSG-100-CR
Wireless Gateway
by Robertshaw Controls Company d/b/a Invensys Home Control Systems
Grantee Code: QI2 Product Code: EMSG100CR
Latest application date: 2002-09-13
FCC ID Device Details
| FCC ID | QI2-EMSG-100-CR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QI2 |
| Product Code | EMSG100CR |
| Applicant Business | Robertshaw Controls Company d/b/a Invensys Home Control Systems 🇺🇸 |
| Related Domains |  invensys.com |
| Equipment Class | Wireless Gateway |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 905-924.6 MHz | Class II permissive change or modification of presently authorized equipment | 2002-09-13 |
| 905-924.6 MHz | Original Equipment | 2002-08-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2002-08-08 | PDF 304.8 KB |
| Internal Photos | Internal Photos | 2002-08-08 | PDF 874.7 KB |
| External Photos | External Photos | 2002-08-08 | PDF 197.4 KB |
| Revised FCC ID label format | ID Label/Location Info | 2002-09-13 | PDF 66 KB |
| FCC ID label format and location | ID Label/Location Info | 2002-08-08 | PDF 265.5 KB |
| Test Setup Photos 1 of 2 | Test Setup Photos | 2002-09-13 | PDF 256.8 KB |
| Test Setup Photos 2 of 2 | Test Setup Photos | 2002-09-13 | PDF 188.1 KB |
| Test Setup Photos | Test Setup Photos | 2002-08-08 | PDF 376.5 KB |
| Test Report | Test Report | 2002-09-13 | PDF 30.3 KB |
| Test Report | Test Report | 2002-08-08 | PDF 1.8 MB |
| Class II permissive change letter | Cover Letter(s) | 2002-09-13 | PDF 29.5 KB |
| Request for confidentiality letter | Cover Letter(s) | 2002-08-08 | PDF 27 KB |
| TCB Q and A | Cover Letter(s) | 2002-08-08 | PDF 2.4 KB |
| Antenna Specification | Parts List/Tune Up Info | 2002-08-08 | PDF 100.6 KB |
| MPE estimate | RF Exposure Info | 2002-08-08 | PDF 6.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 316.5 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 160.1 KB | |
| Theory of operation Metadata only | Operational Description | PDF 339 KB |
Application Information
| Application ID | fQbwkrqvjwrnP0sMRhmfig== |
|---|---|
| Final Action Date | 2002-09-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007429053 |
| Model | EMSG-100-CR |
| Frequency Range | 905-924.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Gateway |
| Responsible Party | Allen J Jones, Project Manager, allen.jones@invensys.com , 804-289-4426 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Remove Cable Modem module in this Class II permissive change filing. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fQbwkrqvjwrnP0sMRhmfig== | 2002-09-13 | Class II permissive change or modification of presently authorized equipment |
| WL23YdJJeEywHfpDkrpnXQ== | 2002-08-08 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 905-924.6 MHz | 0.0190000 | 15C |
Grants
TCB Grant - Application WL23YdJJeEywHfpDkrpnXQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/08/2002 Application Dated: 08/08/2002 |
| Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| P.O. Box 27606 |
| Richmond, VA 23261-7601 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSG-100-CR |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Cable Ready Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.019 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application WL23YdJJeEywHfpDkrpnXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robertshaw Controls Company d/b/a Invensys Home Control Systems P.O. Box 27606 Richmond, VA 23261-7601 United States |
Date of Grant: 08/08/2002 Application Dated: 08/08/2002 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSG-100-CR |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Cable Ready Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.019 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2002 Application Dated: 09/13/2002 |
| Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| P.O. Box 27606 |
| Richmond, VA 23261-7601 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSG-100-CR |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.019 |
| Remove Cable Modem module in this Class II permissive change filing. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application fQbwkrqvjwrnP0sMRhmfig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robertshaw Controls Company d/b/a Invensys Home Control Systems P.O. Box 27606 Richmond, VA 23261-7601 United States |
Date of Grant: 09/13/2002 Application Dated: 09/13/2002 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSG-100-CR |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.019 |
| Remove Cable Modem module in this Class II permissive change filing. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |