FCC ID QI2-EMSL-200
Wireless Load Control Meter
by Robertshaw Controls Company d/b/a Invensys Home Control Systems
Grantee Code: QI2 Product Code: EMSL200
Latest application date: 2003-05-12
FCC ID Device Details
| FCC ID | QI2-EMSL-200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QI2 |
| Product Code | EMSL200 |
| Applicant Business | Robertshaw Controls Company d/b/a Invensys Home Control Systems 🇺🇸 |
| Related Domains |  invensys.com |
| Equipment Class | Wireless Load Control Meter |
| Test Firm | Compliance Certification Services Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 905-924.6 MHz | Class II permissive change or modification of presently authorized equipment | 2003-05-12 |
| 905-924.6 MHz | Original Equipment | 2002-09-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2002-09-03 | PDF 260.1 KB |
| Internal Photos | Internal Photos | 2002-09-03 | PDF 1.3 MB |
| External Photos | External Photos | 2002-09-03 | PDF 239.4 KB |
| FCC ID label format and location | ID Label/Location Info | 2002-09-03 | PDF 514.9 KB |
| Operational Description | Operational Description | 2002-09-03 | PDF 2.5 MB |
| Test Setup Photos | Test Setup Photos | 2003-05-12 | PDF 91 KB |
| Test Setup Photos | Test Setup Photos | 2002-09-03 | PDF 1.2 MB |
| AC line conducted test data | Test Report | 2003-05-12 | PDF 32.9 KB |
| Additional Test report | Test Report | 2003-05-12 | PDF 95 KB |
| High Channel | Test Report | 2003-05-12 | PDF 183 KB |
| Low Channel with 110 VAC | Test Report | 2003-05-12 | PDF 236 KB |
| Low channel with 240VAC | Test Report | 2003-05-12 | PDF 207 KB |
| Mid Channel | Test Report | 2003-05-12 | PDF 202 KB |
| Occup bw and channel occup | Test Report | 2003-05-12 | PDF 1.5 MB |
| Test Report | Test Report | 2002-09-03 | PDF 886.8 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2003-05-12 | PDF 92.2 KB |
| TCB Q and A | Cover Letter(s) | 2003-05-12 | PDF 36.2 KB |
| Request for confidentiality letter | Cover Letter(s) | 2002-09-03 | PDF 59 KB |
| MPE estimate | RF Exposure Info | 2002-09-03 | PDF 25 KB |
| Block Diagram Metadata only | Block Diagram | PDF 260 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 139.9 KB | |
| Antenna Specification Metadata only | Parts List/Tune Up Info | PDF 107.6 KB |
Application Information
| Application ID | 7vU6kX5zpaLa6gQ0HBkcAw== |
|---|---|
| Final Action Date | 2003-05-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007429053 |
| Model | EMSL-200 |
| Frequency Range | 905-924.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Load Control Meter |
| Responsible Party | Allen J Jones, Project Manager, allen.jones@invensys.com , 804-289-4426 |
| Agent | Tom Tom Tom, T.N. Cokenias Consulting, tom@tncokenias.org  , 650-726-1263 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com  , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 7vU6kX5zpaLa6gQ0HBkcAw== | 2003-05-12 | Class II permissive change or modification of presently authorized equipment |
| B8gCZ6Rf3rWBy4tB5gGj9Q== | 2002-09-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application B8gCZ6Rf3rWBy4tB5gGj9Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/03/2002 Application Dated: 09/03/2002 |
| Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| P.O. Box 27606 |
| Richmond, VA 23261-7601 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSL-200 |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Load Control Meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.0114 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application B8gCZ6Rf3rWBy4tB5gGj9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robertshaw Controls Company d/b/a Invensys Home Control Systems P.O. Box 27606 Richmond, VA 23261-7601 United States |
Date of Grant: 09/03/2002 Application Dated: 09/03/2002 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSL-200 |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Load Control Meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 905.0 - 924.6 | 0.0114 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/12/2003 Application Dated: 05/12/2003 |
| Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| P.O. Box 27606 |
| Richmond, VA 23261-7601 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSL-200 |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Load Control Meter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 905.0 - 924.6 | 0.0114 |
| Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application 7vU6kX5zpaLa6gQ0HBkcAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robertshaw Controls Company d/b/a Invensys Home Control Systems P.O. Box 27606 Richmond, VA 23261-7601 United States |
Date of Grant: 05/12/2003 Application Dated: 05/12/2003 |
| Attention: Allen Jones , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QI2-EMSL-200 |
| Name of Grantee: | Robertshaw Controls Company d/b/a Invensys Home Control Systems |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Load Control Meter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 905.0 - 924.6 | 0.0114 |
| Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |