FCC ID QIPELS31-US

QIP-ELS31-US, QIP ELS31US, QIPELS31-US, QIPELS3I-US, QIPEL531-U5, Q1PELS31-US, OIPELS31-US, 0IPELS31-US

Gemalto M2M GmbH LTE Module ELS31-US

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: QIPELS31-US is QIP. The remaining characters of the FCC ID, ELS31-US, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: LTE Module

Application: LTE Module
Equipment Class: PCB - PCS Licensed Transmitter
Short Link: fcc.id/QIPELS31-US
Sources: FCC.gov | FCC.report
Registered By: Gemalto M2M GmbH - QIP (Germany)

App #	Purpose	Date	Unique ID
1	Original Equipment	2017-01-19	7PYaVP7wnEkixBsC7Rzipg==

Operating Frequencies

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
701.5-713.5 MHz	216 mW	0.01ppm	4M52G7D	27	5
704-711 MHz	191 mW	0.01ppm	8M95G7D	27	6
704-711 MHz	220 mW	0.01ppm	4M90W7D	27	7
1.72-1.745 GHz	235 mW	0.01ppm	18M0G7D	27	3
1.72-1.745 GHz	243 mW	0.01ppm	5M11W7D	27	4
1.86-1.9 GHz	240 mW	0.01ppm	17M9G7D	24E	1
1.86-1.9 GHz	243 mW	0.01ppm	5M05W7D	24E	2

Exhibits

Document	Type	Submitted Available
short term confidentiality letter	Cover Letter(s) Adobe Acrobat PDF (470 kB)	2017-01-19 2017-01-19
LTE Test report annex1 part 2	Test Report Adobe Acrobat PDF (3496 kB)	2017-01-19 2017-01-19
LTE Test report annex1 part 1	Test Report Adobe Acrobat PDF (5196 kB)	2017-01-19 2017-01-19
Test setup photos	Test Setup Photos Adobe Acrobat PDF (888 kB)	2017-01-19 2017-07-18
LTE Test report	Test Report Adobe Acrobat PDF (2625 kB)	2017-01-19 2017-01-19
Test setup photos_annex4	Test Setup Photos Adobe Acrobat PDF (907 kB)	2017-01-19 2017-01-19
RF Exposure USA	RF Exposure Info Adobe Acrobat PDF (1505 kB)	2017-01-19 2017-01-19
external_photos	External Photos Adobe Acrobat PDF (95 kB)	2017-01-19 2017-07-18
User Manual	Users Manual Adobe Acrobat PDF (850 kB)	2017-01-19 2017-07-18
label_location	ID Label/Location Info Adobe Acrobat PDF (329 kB)	2017-01-19 2017-01-19
internal_photos	Internal Photos Adobe Acrobat PDF (137 kB)	2017-01-19 2017-07-18
modular_approval-statement1	Cover Letter(s) Adobe Acrobat PDF (129 kB)	2017-01-19 2017-01-19
long term confidentiality letter	Cover Letter(s) Adobe Acrobat PDF (44 kB)	2017-01-19 2017-01-19
operational_description	Operational Description Adobe Acrobat PDF (1967 kB)	2017-01-19
block diagram	Block Diagram Adobe Acrobat PDF (46 kB)	2017-01-19
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (50 kB)	2017-01-19
schematic	Schematics Adobe Acrobat PDF (421 kB)	2017-01-19
External photo annex2	External Photos Adobe Acrobat PDF (805 kB)	2017-01-19 2017-07-18
tune_up_procedure	Parts List/Tune Up Info Adobe Acrobat PDF (355 kB)	2017-01-19

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Gemalto M2M GmbH
FCC Registration Number (FRN):	0007412448
Alphanumeric FCC ID:	QIPELS31US
Unique Application Identifier:	7PYaVP7wnEkixBsC7Rzipg==
Line one:	Siemensdamm 50
City:	Berlin
State:	N/A
Country:	Germany
Zip Code:	13629

TCB Information

TCB Application Email Address:	TCB@cetecom.com
TCB Scope:	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID

Grantee Code:	QIP
Product Code:	ELS31-US

Person at the applicant's address to receive grant or for contact

Name:	Thorsten Liebig
Title:	Manager Approval

Telephone Number:

004930311028241

Extension:

Fax Number:	004930311028305
Email:	thorsten.liebig@gemalto.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 07/18/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	LTE Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: CETECOM GmbH

First Name: Rachid

Last Name: Acharkaoui

Telephone Number:

49-2054-9519-250

Extension:

Fax Number: 49-2054-9519-964

E-mail: rachid.acharkaoui@cetecom.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device is to be used in mobile or fixed applications only as specified in this filing. For the specific configurations in this filing the internal antenna and external gain, including cable loss, must not exceed 6.56dBd in LTE Band 12, 5.0dBi in LTE Band 4 and 8.01dBi in LTE Band 2 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 24E and 27. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use This device supports LTE Band 12 (700 MHz) with 5/10 MHz bandwidth modes for QPSK and 5MHz for 16QAM; and LTE Bands 2 (1900 MHz) and 4 (1700 MHz) with 5/10/15/20 MHz bandwidth modes for QPSK and 5MHz for 16QAM.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Thorsten Liebig

Title of authorized signature: Manager Approval

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

CTC advanced GmbH (former CETECOM ICT Services Gmb
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany

Date of Grant: 01/19/2017

Application Dated: 01/19/2017

Gemalto M2M GmbH

Siemensdamm 50

Berlin, 13629
Germany

Attention: Thorsten Liebig , Manager Approval

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QIPELS31-US

Name of Grantee:	Gemalto M2M GmbH

Equipment Class:	PCS Licensed Transmitter
Notes:	LTE Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1860.0 - 1900.0	0.24	0.01 PM	17M9G7D
	24E	1860.0 - 1900.0	0.243	0.01 PM	5M05W7D
	27	1720.0 - 1745.0	0.235	0.01 PM	18M0G7D
	27	1720.0 - 1745.0	0.243	0.01 PM	5M11W7D
	27	701.5 - 713.5	0.216	0.01 PM	4M52G7D
	27	704.0 - 711.0	0.191	0.01 PM	8M95G7D
	27	704.0 - 711.0	0.22	0.01 PM	4M90W7D

Output power listed is peak conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device is to be used in mobile or fixed applications only as specified in this filing. For the specific configurations in this filing the internal antenna and external gain, including cable loss, must not exceed 6.56dBd in LTE Band 12, 5.0dBi in LTE Band 4 and 8.01dBi in LTE Band 2 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 24E and 27.

The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use

This device supports LTE Band 12 (700 MHz) with 5/10 MHz bandwidth modes for QPSK and 5MHz for 16QAM; and LTE Bands 2 (1900 MHz) and 4 (1700 MHz) with 5/10/15/20 MHz bandwidth modes for QPSK and 5MHz for 16QAM.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Gemalto M2M GmbH
Siemensdamm 50
Berlin, 13629
Germany