FCC ID QIPEMS31-VR1

Cinterion EMS31-V

by THALES DIS AlS Deutschland GmbH

Grantee Code: QIP   Product Code: EMS31VR1
Latest application date: 2018-03-28

FCC ID Device Details

FCC IDQIPEMS31-VR1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIP
Product CodeEMS31VR1
Applicant BusinessTHALES DIS AlS Deutschland GmbH 🇩🇪
Related Domains thalesgroup.com
Equipment ClassCinterion EMS31-V
Test FirmCETECOM GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
777-786.9 MHzOriginal Equipment2018-03-28

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-09-24PDF 525.1 KB
Internal PhotosInternal Photos2018-09-24PDF 170 KB
External PhotosExternal Photos2018-09-24PDF 206.7 KB
External Photos - test reportExternal Photos2018-09-24PDF 1.4 MB
RF Exposure Evaluation - ext photosExternal Photos2018-09-24PDF 582.8 KB
ID Label_Location InfoID Label/Location Info2018-03-28PDF 73.9 KB
Test Setup PhotosTest Setup Photos2018-09-24PDF 859.8 KB
Test report LTE - plotsTest Report2018-03-28PDF 5.5 MB
Test report LTE - reportTest Report2018-03-28PDF 1.7 MB
Cover Letter - moduleCover Letter(s)2018-03-28PDF 109.4 KB
FCC Confidentiality RequestCover Letter(s)2018-03-28PDF 52.4 KB
FCC Confidentiality Request - STCCover Letter(s)2018-03-28PDF 43.4 KB
RF Exposure EvaluationRF Exposure Info2018-03-28PDF 666.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 58.9 KB
Schematics Metadata onlySchematicsPDF 134.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 2 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 50.1 KB
Tune Up Info_Parts List Metadata onlyParts List/Tune Up InfoPDF 46.1 KB

Application Information

Application IDPDZdsGVLvYwqCPpBYWuwVw==
Final Action Date2018-03-28
Application PurposeOriginal Equipment
Applicant FRN0019578749
ModelEMS31-VR1
Frequency Range777-786.9 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCinterion EMS31-V
Responsible PartyAxel Heike, Manager Certifications, axel.heike@thalesgroup.com , 004930311028146
Test FirmNiels Jess, CETECOM GmbH, niels.jess@cetecom.com , +49 2054 9519 603
TCB Emailtcb-essen@cetecom.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/24/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Modular approval. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 6.26 dBd at 700 MHz and 4.5 dBi at 1700 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 27. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. This device supports LTE band 13 with bandwidth modes 5 MHz and 10 MHz and LTE band 4 with bandwidth modes 5 MHz, 10 MHz, 15 MHz and 20 MHz for QPSK and 16QAM modulations.

Applications

Application IDDatePurpose
PDZdsGVLvYwqCPpBYWuwVw==2018-03-28Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
777-786.9 MHz0.3080.018ppm1M15G7D27BC
777-786.9 MHz0.310.029ppm1M00W7D27BC
779.5-784.5 MHz0.3260.029ppm1M00W7D27BC
1712.5-1752.5 MHz0.3370.01ppm1M14W7D27
1712.5-1752.5 MHz0.3440.014ppm1M00G7D27BC
1720-1745 MHz0.3220.01ppm1M14W7D27BC
1720-1745 MHz0.3270.014ppm1M00G7D27BC

Grants

TCB Grant - Application PDZdsGVLvYwqCPpBYWuwVw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 03/28/2018

Application Dated: 03/28/2018
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPEMS31-VR1
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cinterion EMS31-V
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 27 777.0  -  786.9 0.308 0.018  PM 1M15G7D
BC 27 777.0  -  786.9 0.31 0.029  PM 1M00W7D
BC 27 779.5  -  784.5 0.326 0.029  PM 1M00W7D
BC 27 1720.0  -  1745.0 0.322 0.01  PM 1M14W7D
27 1712.5  -  1752.5 0.337 0.01  PM 1M14W7D
BC 27 1712.5  -  1752.5 0.344 0.014  PM 1M00G7D
BC 27 1720.0  -  1745.0 0.327 0.014  PM 1M00G7D

Output power listed is conducted. Modular approval. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 6.26 dBd at 700 MHz and 4.5 dBi at 1700 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 27.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. This device supports LTE band 13 with bandwidth modes 5 MHz and 10 MHz and LTE band 4 with bandwidth modes 5 MHz, 10 MHz, 15 MHz and 20 MHz for QPSK and 16QAM modulations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application PDZdsGVLvYwqCPpBYWuwVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 03/28/2018

Application Dated: 03/28/2018
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPEMS31-VR1
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cinterion EMS31-V
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 27 777.0  -  786.9 0.308 0.018  PM 1M15G7D
BC 27 777.0  -  786.9 0.31 0.029  PM 1M00W7D
BC 27 779.5  -  784.5 0.326 0.029  PM 1M00W7D
BC 27 1720.0  -  1745.0 0.322 0.01  PM 1M14W7D
27 1712.5  -  1752.5 0.337 0.01  PM 1M14W7D
BC 27 1712.5  -  1752.5 0.344 0.014  PM 1M00G7D
BC 27 1720.0  -  1745.0 0.327 0.014  PM 1M00G7D

Output power listed is conducted. Modular approval. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 6.26 dBd at 700 MHz and 4.5 dBi at 1700 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 27.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. This device supports LTE band 13 with bandwidth modes 5 MHz and 10 MHz and LTE band 4 with bandwidth modes 5 MHz, 10 MHz, 15 MHz and 20 MHz for QPSK and 16QAM modulations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: