FCC ID QIPPDS5-US

PDS5-US

by THALES DIS AlS Deutschland GmbH

Grantee Code: QIP   Product Code: PDS5US
Latest application date: 2019-02-26

FCC ID Device Details

FCC IDQIPPDS5-US
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIP
Product CodePDS5US
Applicant BusinessTHALES DIS AlS Deutschland GmbH 🇩🇪
Related Domains thalesgroup.com ecit.org.cn
Equipment ClassPDS5-US
Test FirmIndustrial Internet Innovation Center (Shanghai)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2019-02-26
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2015-03-27
824.2-848.8 MHzOriginal Equipment2014-10-31

Exhibits

DocumentTypeAvailableFile
PDS5 UMUsers Manual2019-08-25PDF 453 KB
TempConfidential_PDS5-US_user manual_Rev 2Users Manual2015-09-23PDF 1.1 MB
PDS5-US_user manual_Rev 2Users Manual2014-10-31PDF 1.1 MB
I18D00183 Internal PhotoInternal Photos2019-08-25PDF 408.2 KB
TempConfidential_QIPPDS5-US_EUT Internal PhotosInternal Photos2015-09-23PDF 215.2 KB
QIPPDS5-US_EUT Internal PhotosInternal Photos2014-10-31PDF 214.4 KB
I18D00183 External PhotoExternal Photos2019-08-25PDF 360.5 KB
TempConfidential_QIPPDS5-US_EUT External PhotosExternal Photos2015-09-23PDF 653 KB
QIPPDS5-US_EUT External PhotosExternal Photos2014-10-31PDF 652.6 KB
PDS5-US labelID Label/Location Info2019-02-26PDF 55 KB
PDS5-US_Label&Label LocationID Label/Location Info2014-10-31PDF 216.8 KB
TempConfidential_PDS5-US_Part 22&24 SetUp PhotosTest Setup Photos2015-09-23PDF 364.8 KB
QIPPDS5-US_Part 22&24 SetUp PhotosTest Setup Photos2014-10-31PDF 364.2 KB
I18D00183-SRD01-2G 3GTest Report2019-02-26PDF 417.9 KB
PDS5-US_Part 22&24 RF test report_Rev 1Test Report2015-03-27PDF 4.4 MB
QIPPDS5-US_Part 22&24 RF Test Report_Rev 1Test Report2014-10-31PDF 3.7 MB
Authority to Actas AgentCover Letter(s)2019-02-26PDF 41.3 KB
PDS5 LONG TERM CONFIDENTIALITYCover Letter(s)2019-02-26PDF 53.1 KB
PDS5 Modular Approval FCCCover Letter(s)2019-02-26PDF 147.7 KB
PDS5 SHORT TERM CONFIDENTIALITYCover Letter(s)2019-02-26PDF 51 KB
PDS5-US_Request for Class II Permissive ChangeCover Letter(s)2019-02-26PDF 51.2 KB
Authority to_FCC_Act_as_AgentCover Letter(s)2015-03-27PDF 373.3 KB
PDS5-US_FCC Modular Approval letterCover Letter(s)2015-03-27PDF 465.2 KB
QIPPDS5-US_Class II Cover LetterCover Letter(s)2015-03-27PDF 161.6 KB
QIPPDS5-US_FCC Request for ConfidentialityCover Letter(s)2015-03-27PDF 286.9 KB
PDS5-US_FCC Modular Approval letterCover Letter(s)2014-10-31PDF 461.6 KB
PDS5-US_FCC Request for ConfidentialityCover Letter(s)2014-10-31PDF 315.8 KB
I18D00183-SAR01 Metadata onlyRF Exposure Info2019-02-26PDF 417.9 KB
I18D00183-SAR01-V1RF Exposure Info2019-02-26PDF 419.5 KB
PDS5-US_Exposure Evaluation Declaration_Rev 1RF Exposure Info2015-03-27PDF 155.4 KB
QIPPDS5-US_Exposure Evaluation Declaration_Rev 1RF Exposure Info2014-10-31PDF 205.2 KB
Confidential_PDS5-US block diagram Metadata onlyBlock DiagramPDF 191.1 KB
PDS5-US Block diagram Metadata onlyBlock DiagramPDF 112.9 KB
Confidential_PDS5-US_B2.1_schematic Metadata onlySchematicsPDF 208.4 KB
PDS5-US SCH Metadata onlySchematicsPDF 209.6 KB
PDS5-US_Schematic Metadata onlySchematicsPDF 442.1 KB
Confidential_PDS5-US_Operation description_Rev 2 Metadata onlyOperational DescriptionPDF 214.4 KB
Confidential_QIPPDS5-US_Operation description_Rev 3 Metadata onlyOperational DescriptionPDF 1.5 MB
Confidential_difference_ASTER_Delta_Description_PDSX-Rev.1.1_to_PDSX-Rev.2.1_Rev Metadata onlyOperational DescriptionPDF 1.1 MB
PDS5 Operetion Description Metadata onlyOperational DescriptionPDF 1.7 MB
PDS5-US part placement SCH Metadata onlyOperational DescriptionPDF 96.6 KB
PDSx HW_Delta_Description_Rel.1(B2.1)_to_Rel.4(B2.2) Metadata onlyOperational DescriptionPDF 1 MB
Confidential_PCB layout-B2.1 Metadata onlySDR Software/Security InfPDF 1.4 MB
Confidential_PDS5-US_B2.1 Placement Metadata onlySDR Software/Security InfPDF 18.3 KB
Confidential_PDS5-US_B2.1_Parts list Metadata onlyParts List/Tune Up InfoPDF 138.4 KB
Confidential_PDS5-US_Parts list Metadata onlyParts List/Tune Up InfoPDF 76.3 KB
Confidential_PDS5-US_Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 161.5 KB
PDS5 BOM Metadata onlyParts List/Tune Up InfoPDF 682.8 KB
PDS5-US Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 161.5 KB

Application Information

Application IDidVDVmf958Ph/B+74UjteA==
Final Action Date2019-02-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019578749
ModelPDS5-US
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionPDS5-US
Responsible PartyAxel Heike, Manager Certifications, axel.heike@thalesgroup.com , 004930311028146
AgentYuan Yuan Yuan, East China Institute of Telecommunications, zhouyan@ecit.org.cn , 86-21-63843300
Technical ContactKunpeng Gou, Beijing 7Layers, kunpeng.gou@7layers.com , 86-10-68050368
Non-Technical ContactYan Zhou, East China Institute of Telecommunications, zhouyan@ecit.org.cn , 86-21-63843300
Test FirmZheng Zhongbin, Industrial Internet Innovation Center (Shanghai), zhangyu@3in.org , 86-21-63843300
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/25/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change, Minor circuitry for non transmitter portions. Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 8.01 dBi at 1900 MHz and 6.01 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

Applications

Application IDDatePurpose
idVDVmf958Ph/B+74UjteA==2019-02-26Class II permissive change or modification of presently authorized equipment
CBOIkNg5OzpU+07vxn/5Uw==2015-03-27Class II permissive change or modification of presently authorized equipment
4ziZZlCPDHiIBUXuSUkI6A==2014-10-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz1.6625Hz244KGXW22HBC
824.2-848.8 MHz2.1380.1ppm244KGXW22H
824.2-848.8 MHz0.4118Hz253KG7W22HBC
824.2-848.8 MHz0.5580.1ppm247KG7W22H
826.4-846.6 MHz0.2113Hz4M07F9W22HBC
826.4-846.6 MHz0.2670.1ppm4M07F9W22H
1850.2-1909.8 MHz0.8610Hz244KGXW24EBC
1850.2-1909.8 MHz1.0350.1ppm247KGXW24E
1850.2-1909.8 MHz0.3422Hz247KG7W24EBC
1850.2-1909.8 MHz0.420.1ppm248KG7W24E
1852.4-1907.6 MHz0.2560.1ppm4M07F9W24E
1852.4-1907.6 MHz0.2121Hz4M07F9W24EBC

Grants

TCB Grant - Application idVDVmf958Ph/B+74UjteA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/26/2019

Application Dated: 02/15/2019
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: PDS5-US
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.138 0.1  PM 244KGXW
22H 824.2  -  848.8 0.558 0.1  PM 247KG7W
24E 1850.2  -  1909.8 1.035 0.1  PM 247KGXW
24E 1850.2  -  1909.8 0.42 0.1  PM 248KG7W
24E 1852.4  -  1907.6 0.256 0.1  PM 4M07F9W
22H 826.4  -  846.6 0.267 0.1  PM 4M07F9W

Class II Permissive Change, Minor circuitry for non transmitter portions.

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 8.01 dBi at 1900 MHz and 6.01 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


EAS Grant - Application idVDVmf958Ph/B+74UjteA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 02/26/2019

Application Dated: 02/15/2019
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: PDS5-US
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.138 0.1  PM 244KGXW
22H 824.2  -  848.8 0.558 0.1  PM 247KG7W
24E 1850.2  -  1909.8 1.035 0.1  PM 247KGXW
24E 1850.2  -  1909.8 0.42 0.1  PM 248KG7W
24E 1852.4  -  1907.6 0.256 0.1  PM 4M07F9W
22H 826.4  -  846.6 0.267 0.1  PM 4M07F9W

Class II Permissive Change, Minor circuitry for non transmitter portions.

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 8.01 dBi at 1900 MHz and 6.01 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.



TCB Grant - Application CBOIkNg5OzpU+07vxn/5Uw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/27/2015

Application Dated: 03/11/2015
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: GSM/WCDMA Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.66 25.0  Hz 244KGXW
BC 22H 824.2  -  848.8 0.41 18.0  Hz 253KG7W
BC 24E 1850.2  -  1909.8 0.86 10.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.34 22.0  Hz 247KG7W
BC 22H 826.4  -  846.6 0.21 13.0  Hz 4M07F9W
BC 24E 1852.4  -  1907.6 0.21 21.0  Hz 4M07F9W

Class II Permissive Change, Minor circuitry for non transmitter portions.

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application CBOIkNg5OzpU+07vxn/5Uw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 03/27/2015

Application Dated: 03/11/2015
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: GSM/WCDMA Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.66 25.0  Hz 244KGXW
BC 22H 824.2  -  848.8 0.41 18.0  Hz 253KG7W
BC 24E 1850.2  -  1909.8 0.86 10.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.34 22.0  Hz 247KG7W
BC 22H 826.4  -  846.6 0.21 13.0  Hz 4M07F9W
BC 24E 1852.4  -  1907.6 0.21 21.0  Hz 4M07F9W

Class II Permissive Change, Minor circuitry for non transmitter portions.

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application 4ziZZlCPDHiIBUXuSUkI6A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/31/2014

Application Dated: 10/29/2014
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: GSM/WCDMA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.66 25.0  Hz 244KGXW
BC 22H 824.2  -  848.8 0.41 18.0  Hz 253KG7W
BC 24E 1850.2  -  1909.8 0.86 10.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.34 22.0  Hz 247KG7W
BC 22H 826.4  -  846.6 0.21 13.0  Hz 4M07F9W
BC 24E 1852.4  -  1907.6 0.21 21.0  Hz 4M07F9W

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application 4ziZZlCPDHiIBUXuSUkI6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 10/31/2014

Application Dated: 10/29/2014
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPDS5-US
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: GSM/WCDMA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.66 25.0  Hz 244KGXW
BC 22H 824.2  -  848.8 0.41 18.0  Hz 253KG7W
BC 24E 1850.2  -  1909.8 0.86 10.0  Hz 244KGXW
BC 24E 1850.2  -  1909.8 0.34 22.0  Hz 247KG7W
BC 22H 826.4  -  846.6 0.21 13.0  Hz 4M07F9W
BC 24E 1852.4  -  1907.6 0.21 21.0  Hz 4M07F9W

Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: