FCC ID QIPPLS63-X4

Cinterion PLS63-X4

by THALES DIS AlS Deutschland GmbH

Grantee Code: QIP   Product Code: PLS63X4
Latest application date: 2021-04-08

FCC ID Device Details

FCC IDQIPPLS63-X4
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIP
Product CodePLS63X4
Applicant BusinessTHALES DIS AlS Deutschland GmbH 🇩🇪
Related Domains thalesgroup.com
Equipment ClassCinterion PLS63-X4
Test FirmShenzhen UnionTrust Quality and Technology Co., Lt

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
782 MHzOriginal Equipment2021-04-08
746-756 MHzOriginal Equipment2021-04-08

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-04-08PDF 2.3 MB
Internal PhotosInternal Photos2021-08-31PDF 1.1 MB
External PhotosExternal Photos2021-08-31PDF 1.1 MB
Label and LocationID Label/Location Info2021-04-08PDF 48.2 KB
Operational DescriptionOperational Description2021-04-08PDF 2.3 MB
PLS63-X4_PLS83-X_hw_delta_v01Operational Description2021-04-08PDF 609 KB
Test Setup PhotosTest Setup Photos2021-08-31PDF 1.8 MB
Test Setup PhotosTest Setup Photos2021-08-31PDF 852.9 KB
Test ReportTest Report2021-04-08PDF 1.5 MB
Test Report part 1Test Report2021-04-08PDF 5.3 MB
Test Report part 2Test Report2021-04-08PDF 5 MB
Test Report part3Test Report2021-04-08PDF 4 MB
Agent LetterCover Letter(s)2021-04-08PDF 282.2 KB
Long Term Confidentiality LetterCover Letter(s)2021-04-08PDF 355.8 KB
Modular Approval UnlicensedCover Letter(s)2021-04-08PDF 364.3 KB
Short Term Confidentiality LetterCover Letter(s)2021-04-08PDF 355.6 KB
MPERF Exposure Info2021-04-08PDF 841.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 122.7 KB
Schematics Metadata onlySchematicsPDF 399.3 KB
Schematics_PCB Layout Metadata onlySchematicsPDF 2.7 MB
BOM Metadata onlyParts List/Tune Up InfoPDF 53.7 KB
Tune-up Metadata onlyParts List/Tune Up InfoPDF 566.8 KB

Application Information

Application IDU9dKuTMfRy2rq9uyNMEs5w==
Final Action Date2021-04-08
Application PurposeOriginal Equipment
Applicant FRN0019578749
ModelPLS63-X4
Frequency Range782 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCinterion PLS63-X4
Responsible PartyAxel Heike, Manager Certifications, axel.heike@thalesgroup.com , 004930311028146
Test FirmGeorge Luo, Shenzhen UnionTrust Quality and Technology Co., Lt, quality@uttlab.com , +86-755-28230888
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/31/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is ERP for part 27 below 1 GHz, EIRP for part27 above 1 GHz. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 4 ; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Applications

Application IDDatePurpose
U9dKuTMfRy2rq9uyNMEs5w==2021-04-08Original Equipment
U+ZXkhGIwddQ5ZOIcOkjgQ==2021-04-08Original Equipment
0yWB9eSVRtqHZEwMeV1PSg==2021-04-08Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
746-756 MHz15B
782 MHz0.131830.0166ppm8M96G7D27
782 MHz0.10940.0166ppm8M95W7D27
1720-1745 MHz0.217770.011ppm18M0G7D27
1720-1745 MHz0.165960.011ppm18M0W7D27

Grants

TCB Grant - Application U9dKuTMfRy2rq9uyNMEs5w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/08/2021

Application Dated: 04/08/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1720.0  -  1745.0 0.21777 0.011  PM 18M0G7D
27 1720.0  -  1745.0 0.16596 0.011  PM 18M0W7D
27 782.0  -  782.0 0.13183 0.0166  PM 8M96G7D
27 782.0  -  782.0 0.1094 0.0166  PM 8M95W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Power listed is ERP for part 27 below 1 GHz, EIRP for part27 above 1 GHz. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 4 ; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.


EAS Grant - Application U9dKuTMfRy2rq9uyNMEs5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 04/08/2021

Application Dated: 04/08/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1720.0  -  1745.0 0.21777 0.011  PM 18M0G7D
27 1720.0  -  1745.0 0.16596 0.011  PM 18M0W7D
27 782.0  -  782.0 0.13183 0.0166  PM 8M96G7D
27 782.0  -  782.0 0.1094 0.0166  PM 8M95W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Power listed is ERP for part 27 below 1 GHz, EIRP for part27 above 1 GHz. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 4 ; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



TCB Grant - Application U+ZXkhGIwddQ5ZOIcOkjgQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/08/2021

Application Dated: 04/08/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application U+ZXkhGIwddQ5ZOIcOkjgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 04/08/2021

Application Dated: 04/08/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application 0yWB9eSVRtqHZEwMeV1PSg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/08/2021

Application Dated: 04/08/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 746.0  -  756.0


EAS Grant - Application 0yWB9eSVRtqHZEwMeV1PSg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 04/08/2021

Application Dated: 04/08/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS63-X4
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Cinterion PLS63-X4
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B 746.0  -  756.0



Mail To: