FCC ID QISAP6510DN-AGN

Wireless LAN Access Point

by Huawei Technologies Co.,Ltd

Grantee Code: QIS   Product Code: AP6510DNAGN
Latest application date: 2014-07-17

FCC ID Device Details

FCC IDQISAP6510DN-AGN
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIS
Product CodeAP6510DNAGN
Applicant BusinessHuawei Technologies Co.,Ltd 🇨🇳
Related Domains huawei.com btl.org.cn
Equipment ClassWireless LAN Access Point
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-07-17
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2014-07-17
2412-2462 MHzOriginal Equipment2013-03-07
5260-5320 MHzOriginal Equipment2013-03-07

Exhibits

DocumentTypeAvailableFile
13. AP6510DN-AGN-US User manual 1Users Manual2014-07-17PDF 1,004.6 KB
13. AP6510DN-AGN-US User manual 2Users Manual2014-07-17PDF 668.8 KB
13. AP6510DN-AGN-US User manual 3Users Manual2014-07-17PDF 2.2 MB
20. User Manual 1Users Manual2013-03-07PDF 1,004.6 KB
20. User Manual 1 Rev 1Users Manual2013-03-07PDF 2.4 MB
20. User Manual 2-Rev.1Users Manual2013-03-07PDF 668.8 KB
20. User Manual 3Users Manual2013-03-07PDF 2.2 MB
9. AP6510DN-AGN-US Internal PhotosInternal Photos2014-07-17PDF 2.3 MB
14. Internal Photos-ver1Internal Photos2013-03-07PDF 2.3 MB
8. AP6510DN-AGN-US External PhotosExternal Photos2014-07-17PDF 795.7 KB
13. External PhotosExternal Photos2013-03-07PDF 859 KB
12. AP6510DN-AGN-US Label and locationID Label/Location Info2014-07-17PDF 363.9 KB
19. Label and locationID Label/Location Info2013-03-07PDF 363.9 KB
10. AP6510DN-AGN-US Test Setup PhotosTest Setup Photos2014-07-17PDF 358.1 KB
15. Test Setup Photos 15.247Test Setup Photos2013-03-07PDF 292.8 KB
15. Test Setup Photos 15.407Test Setup Photos2013-03-07PDF 276.2 KB
15. Test Setup Photos DFSTest Setup Photos2013-03-07PDF 164.3 KB
7. AP6510DN-AGN-US Test Report_2.4G Part I Rev 1Test Report2014-07-17PDF 301.9 KB
7. AP6510DN-AGN-US Test Report_2.4G Part II Rev 1Test Report2014-07-17PDF 3.1 MB
7. AP6510DN-AGN-US Test Report_2.4G Part III Rev 1Test Report2014-07-17PDF 2.6 MB
7. AP6510DN-AGN-US Test Report_BAND 2-3 Rev 1Test Report2014-07-17PDF 3.1 MB
7. AP6510DN-AGN-US Test Report_BAND 4 Rev 1Test Report2014-07-17PDF 2.3 MB
7. AP6510DN-AGN-US Test Report_DFS Master Rev 1 Metadata onlyTest Report2014-07-17PDF 1.9 MB
12. Test Report 2.4G Part ITest Report2013-03-07PDF 461.7 KB
12. Test Report 2.4G Part II-1Test Report2013-03-07PDF 3 MB
12. Test Report 2.4G Part II-2Test Report2013-03-07PDF 3.2 MB
12. Test Report 2.4G Part II-3Test Report2013-03-07PDF 3.1 MB
12. Test Report Band 2&3-15.247Test Report2013-03-07PDF 2.9 MB
12. Test Report Band 2&3-15.247 Rev 1Test Report2013-03-07PDF 3.1 MB
12. Test Report Band 4-15.407Test Report2013-03-07PDF 1.9 MB
12. Test Report DFS-rev1Test Report2013-03-07PDF 3 MB
15. Antenna SPECAttestation Statements2014-07-17PDF 357.6 KB
15. Antenna SPEC 2.4GAttestation Statements2014-07-17PDF 131.6 KB
4. AP6510DN-AGN-US Attestation Statement 5600-5650 Rev1Cover Letter(s)2014-07-17PDF 11.8 KB
287378 D01 Equipment Shipping InstructionsAttestation Statements2013-03-07PDF 3.2 MB
6. Attestation StatementCover Letter(s)2013-03-07PDF 155.6 KB
AP6510DN-AGN-US Attestation statementCover Letter(s)2013-03-07PDF 827.2 KB
AP6510DN-AGN-US Attestation statement Rev 1Cover Letter(s)2013-03-07PDF 497.2 KB
2. AP6510DN-AGN-US FCC Agent authorization letterCover Letter(s)2014-07-17PDF 11.7 KB
3. AP6510DN-AGN-US Ad Hoc Mode DeclarationCover Letter(s)2014-07-17PDF 61.4 KB
5. AP6510DN-AGN-US FCC Class II permissive change format letter Rev 1Cover Letter(s)2014-07-17PDF 120.9 KB
3. IC Agent authorization letterCover Letter(s)2013-03-07PDF 38.6 KB
4. FCC Request for Confidential letterCover Letter(s)2013-03-07PDF 178.4 KB
5. Ad Hoc Mode DeclarationCover Letter(s)2013-03-07PDF 156.4 KB
5. Ad Hoc Mode Declaration Rev 1Cover Letter(s)2013-03-07PDF 283.3 KB
6. AP6510DN-AGN-US FCC RF ExposureRF Exposure Info2014-07-17PDF 62 KB
11. FCC RF Exposure BAND 2&BAND 3RF Exposure Info2013-03-07PDF 103.6 KB
11. FCC RF Exposure BAND 4RF Exposure Info2013-03-07PDF 101.6 KB
11. RF Exposure Info 2.4GRF Exposure Info2013-03-07PDF 54.4 KB

Application Information

Application IDP9EeYXzAHnH6hKjAUraoJw==
Final Action Date2014-07-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007419963
ModelAP6510DN-AGN
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless LAN Access Point
Responsible PartyZhang Xinghai, zhangxinghai@huawei.com , +86-755-2897-0299
Technical ContactSteven Lu, Neutron Engineering, Inc., steven@btl.org.cn , 86-769-83183000
Non-Technical ContactCathy Wang, Neutron Engineering, Inc., cathy@btl.org.cn , 86-769-83183000
Test FirmDaisy Dai, BTL Inc., daisy.dai@btl.org.cn , 008676983183000
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add new antenna (non-SDR). Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth.

Applications

Application IDDatePurpose
P9EeYXzAHnH6hKjAUraoJw==2014-07-17Class II permissive change or modification of presently authorized equipment
5ucsuWL6ZOXYOmGGrXbjAQ==2014-07-17Class II permissive change or modification of presently authorized equipment
ouSAwBHIf7vAYm2f2HJCTA==2013-03-07Original Equipment
VqfHnPn8VKeKTkyW3JzEZw==2013-03-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.24115CCC, MO
5260-5320 MHz0.12715ECC, MO, ND
5500-5560 MHz0.12215ECC, MO, ND
5680-5700 MHz0.13315ECC, MO, ND
5745-5825 MHz0.74115CCC, MO

Grants

TCB Grant - Application VqfHnPn8VKeKTkyW3JzEZw==

This application does not exist.

EAS Grant - Application VqfHnPn8VKeKTkyW3JzEZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
  Date of Grant: 03/07/2013

Application Dated: 11/19/2012
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Outdoor Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5260.0  -  5320.0 0.127  
CC MO ND 15E 5500.0  -  5560.0 0.122  
CC MO ND 15E 5680.0  -  5700.0 0.133  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth. The maximum antenna gain allowed is 6.4 dBi in 5 GHz band and 3 dBi in 2.4 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application P9EeYXzAHnH6hKjAUraoJw==

Mail To:
Mike Violette,
American Certification Body, Inc.
6731 Whittier Ave. Suite C110
McLean, VA 22101
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/17/2014

Application Dated: 05/22/2014
Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei
Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.241  
CC MO 15C 5745.0  -  5825.0 0.741  

Class II Permissive Change to add new antenna (non-SDR).

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application P9EeYXzAHnH6hKjAUraoJw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
  Date of Grant: 07/17/2014

Application Dated: 05/22/2014
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.241  
CC MO 15C 5745.0  -  5825.0 0.741  

Class II Permissive Change to add new antenna (non-SDR).

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ouSAwBHIf7vAYm2f2HJCTA==

This application does not exist.

EAS Grant - Application ouSAwBHIf7vAYm2f2HJCTA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
  Date of Grant: 03/07/2013

Application Dated: 11/18/2012
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Digital Transmission System
Notes: Outdoor Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.241  
CC MO 15C 5745.0  -  5825.0 0.741  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth. The maximum antenna gain allowed is 6.4 dBi in 5 GHz band and 3 dBi in 2.4 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5ucsuWL6ZOXYOmGGrXbjAQ==

Mail To:
Mike Violette,
American Certification Body, Inc.
6731 Whittier Ave. Suite C110
McLean, VA 22101
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/17/2014

Application Dated: 05/22/2014
Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei
Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5260.0  -  5320.0 0.127  
CC MO ND 15E 5500.0  -  5560.0 0.122  
CC MO ND 15E 5680.0  -  5700.0 0.133  

Class II Permissive Change to add new antenna (non-SDR).

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 5ucsuWL6ZOXYOmGGrXbjAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
  Date of Grant: 07/17/2014

Application Dated: 05/22/2014
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISAP6510DN-AGN
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5260.0  -  5320.0 0.127  
CC MO ND 15E 5500.0  -  5560.0 0.122  
CC MO ND 15E 5680.0  -  5700.0 0.133  

Class II Permissive Change to add new antenna (non-SDR).

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This access point device must be professionally installed. It must be used in conjunction with the grantee's Access Controllers AC6605, or AC6005, or ACU2. The controller should not change the AP’s country code and other settings which may cause the AP to operate on unauthorized channel, power and bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: