B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd LTE CPE

Page 1 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 2 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 3 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 4 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 5 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 6 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 7 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 8 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 9 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 10 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 11 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 12 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 13 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 14 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 15 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 16 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 17 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 18 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 19 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 20 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 21 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 22 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 23 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 24 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 25 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 26 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 27 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 28 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 29 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 30 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 31 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 32 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 33 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 34 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 35 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 36 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 37 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 38 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 39 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 40 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 41 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 42 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 43 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 44 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 45 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 46 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 47 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 48 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 49 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 50 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 51 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 52 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 53 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 54 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 55 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 56 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 57 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 58 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 59 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 60 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 61 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 62 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 63 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 64 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 65 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 66 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 67 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 68 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Page 69 of B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd

No. I18N00754-UMTS
Page 1 of 69
TEST REPORT
No. I18N00754-UMTS
for
Huawei Technologies Co.,Ltd.
LTE CPE
Model Name: B612s-52d
FCC ID: QISB612S-52D
with
Hardware Version: WL1B612M04
Software Version: B612_UPDATE_11.196.00.00.00
Issued Date: 2018-05-28
Note:
The test results in this test report relate only to the devices specified in this report. This report shall not be
reproduced except in full without the written approval of SAICT.
Test Laboratory:
Designation Number: CN1210
SAICT, Shenzhen Academy of Information and Communications Technology
Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen,
Guangdong, P. R. China 518026.
Tel: +86(0)755-33322000, Fax: +86(0)755-33322001
Email: yewu@caict.ac.cn, website: www.cszit.com
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 2 of 69
REPORT HISTORY
Report Number
Revision
Description
Issue Date
I18N00754-UMTS
Rev.0
1st edition
2018-05-28
NOTE: The EUT is a variant model of B612s-51d. All the original values of this report are quoted directly from
I17N00107-WCDMA.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 3 of 69
CONTENTS
1.
TEST LABORATORY..............................................................................................................4
1.1.
TESTING LOCATION ..........................................................................................................4
1.2.
TESTING ENVIRONMENT ..................................................................................................4
1.3.
PROJECT DATA..................................................................................................................4
1.4.
SIGNATURE ........................................................................................................................4
2.
CLIENT INFORMATION ..........................................................................................................5
2.1.
APPLICANT INFORMATION...............................................................................................5
2.2.
MANUFACTURER INFORMATION .....................................................................................5
3.
EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................6
3.1.
ABOUT EUT ........................................................................................................................6
3.2.
INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ...................................6
3.3.
INTERNAL IDENTIFICATION OF AE USED DURING THE TEST......................................6
3.4.
GENERAL DESCRIPTION ..................................................................................................6
4.
REFERENCE DOCUMENTS ..................................................................................................7
4.1.
REFERENCE DOCUMENTS FOR TESTING ......................................................................7
5.
LABORATORY ENVIRONMENT ............................................................................................8
6.
SUMMARY OF TEST RESULTS .............................................................................................9
7.
TEST EQUIPMENTS UTILIZED............................................................................................ 11
ANNEX A: MEASUREMENT RESULTS ......................................................................................12
A.1 OUTPUT POWER ...............................................................................................................12
A.2 EMISSION LIMIT ................................................................................................................17
A.3 FREQUENCY STABILITY ...................................................................................................27
A.4 OCCUPIED BANDWIDTH...................................................................................................30
A.5 EMISSION BANDWIDTH ....................................................................................................37
A.6 BAND EDGE COMPLIANCE...............................................................................................43
A.7 CONDUCTED SPURIOUS EMISSION ...............................................................................47
A.8 PEAK-TO-AVERAGE POWER RATIO ................................................................................69
©Copyright. All rights reserved by SAICT.
No.H8NO0754¨ UMTs
F,I】
Page4of69
1. Test Laboratorv
1.1. Testins Location
Company Name:
Address.
shenzhen Academy oflnformaⅡ on and COmmunications
TechnOIOgy
BuⅡ ding(3,Shenzhen InternationallnnoVaJOn Center,No。 1006
shennan ROad,Fu刂
an DistHct,shenzhen,Guangdong,P.R.China
Postal Code:
518026
Telephone:
+86(0)755-33322000
Fax:
+86(0)755-33322001
1.2. Testing Environment
Normal Temperature: 15-35C
Relative Humidity:
20ˉ
75%
1.3. Proiect data
Testing Start Date:
Testing End Date:
2017-02-16
2017-03-22
1.4. Siqnature
(Rev⒗ wed this test report)
Deputy Director of the laboratory
(Approved this test report)
@Copyright.
All rights rcserued by SAICT.
No. I18N00754-UMTS
Page 5 of 69
2. Client Information
2.1. Applicant Information
Company Name:
Address /Post:
Contact Person:
Contact Email
Telephone:
Fax:
Huawei Technologies Co.,Ltd.
Administration Building, Huawei Base, Bantian, Longgang District,
Shenzhen 518129, P.R.China
zhuangzhendong
zhuangzhendong@huawei.com
0755-36372641
2.2. Manufacturer Information
Company Name:
Address /Post:
Contact Person:
Contact Email
Telephone:
Fax:
Huawei Technologies Co.,Ltd.
Administration Building, Huawei Base, Bantian, Longgang District,
Shenzhen 518129, P.R.China
zhuangzhendong
zhuangzhendong@huawei.com
0755-36372641
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 6 of 69
3. Equipment Under Test (EUT) and Ancillary Equipment (AE)
3.1. About EUT
Description
Model Name
FCC ID
Frequency Bands
Antenna
Extreme vol. Limits
Extreme temp. Tolerance
LTE CPE
B612s-52d
QISB612S-52D
WCDMA Band 2,4,5
Integrated
10.8VDC to 13.2VDC (nominal: 12.0VDC)
-30°C to +50°C
3.2. Internal Identification of EUT used during the test
EUT ID*
S01
IMEI
HW Version
WL1B612M04
SW Version
B612_UPDATE_1
1.196.00.00.00
S02
WL1B612M04
B612_UPDATE_1
1.196.00.00.00
*EUT ID: is used to identify the test sample in the lab internally.
Sample Arrival Date
2017-02-16
2017-02-16
3.3. Internal Identification of AE used during the test
AE ID*
Description
AE1
Charger1
AE2
Charger2
AE1
Model
HW-120100U01
Manufacturer
SHENZHEN HONOR ELECTRONIC CO.,LTD.
AE2
Model
HW-120100U01
Manufacturer
DONGUAN SHILONG FUHUA ELECTRONIC CO.,LTD.
*AE ID: is used to identify the test sample in the lab internally.
3.4. General Description
The Equipment Under Test (EUT) is a model TD-LTE mobile phone with integrated antenna. It
consists of normal options: lithium battery, charger. Manual and specifications of the EUT were
provided to fulfil the test.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 7 of 69
4. Reference Documents
4.1. Reference Documents for testing
The following documents listed in this section are referred for testing.
Reference
FCC Part 22
Title
PUBLIC MOBILE SERVICES
FCC Part 24
PERSONAL COMMUNICATIONS SERVICES
FCC Part 2
FREQUENCY ALLOCATIONS AND RADIO TREATY
MATTERS; GENERAL RULES AND REGULATIONS
MISCELLANEOUS WIRELESS COMMUNICATIONS
SERVICES
Land Mobile FM or PM Communications Equipment
Measurement and Performance Standards
Methods of Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment in the
Range of 9 kHz to 40 GHz
Measurement Guidance for Certification of Licensed Digital
Transmitters
FCC Part 27
ANSI/TIA-603-E
ANSI C63.4
KDB 971168 D01
Version
10-1-16
Edition
10-1-16
Edition
10-1-16
Edition
10-1-16
Edition
2016
2014
v03
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 8 of 69
5. LABORATORY ENVIRONMENT
Control room / conducted chamber did not exceed following limits along the EMC testing:
Temperature
Min. = 15 ℃, Max. = 35 ℃
Relative humidity
Min. =20 %, Max. = 80 %
Shielding effectiveness
> 110 dB
Electrical insulation
>2M
Ground system resistance
< 0.5
Fully-anechoic chamber 2 (8.6 meters×6.1 meters×3.85 meters) did not exceed following limits
along the EMC testing:
Temperature
Min. = 15 ℃, Max. = 30 ℃
Relative humidity
Min. = 35 %, Max. = 60 %
Shielding effectiveness
> 110 dB
Electrical insulation
>2M
Ground system resistance
<1
Site voltage standing-wave ratio (SVSWR)
Between 0 and 6 dB, from 1GHz to 18GHz
Uniformity of field strength
Between 0 and 6 dB, from 80 to 4000 MHz
Semi-anechoic chamber 2 / Fully-anechoic chamber 3 (10 meters×6.7 meters×6.15 meters)
did not exceed following limits along the EMC testing:
Temperature
Min. = 15 ℃, Max. = 30 ℃
Relative humidity
Min. = 35 %, Max. = 60 %
Shielding effectiveness
> 100 dB
Electrical insulation
>2M
Ground system resistance
< 0.5
Normalised site attenuation (NSA)
< ±3.5 dB, 3 m distance
Site voltage standing-wave ratio (SVSWR)
Between 0 and 6 dB, from 1GHz to 18GHz
Uniformity of field strength
Between 0 and 6 dB, from 80 to 3000 MHz
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 9 of 69
6. SUMMARY OF TEST RESULTS
Abbreviations used in this clause:
Verdict Column
Location Column
Pass
Fail
NA
Not applicable
NM
Not measured
A/B/C/D
The test is performed in test location A, B, C or D
which are described in section 1.1 of this report
WCDMA Band II
Items
Test Name
Clause in
FCC rules
Section in
this report
Verdict
Output Power
2.1046/24.232
A.1
EMISSION LIMIT
2.1053/24.238
A.2
Frequency Stability
2.1055/24.235
A.3
Occupied Bandwidth
2.1049/24.238
A.4
Emission Bandwidth
2.1049/24.238
A.5
Band Edge Compliance
Conducted Spurious
Emission
2.1051/24.238
A.6
2.1051/24.238
A.7
24.232/KDB971168
D01(5.7.1)
A.8
Peak-to-Average Power
Ratio
WCDMA Band V
Items
Test Name
Clause in
FCC rules
Section in
this report
Verdict
Output Power
2.1046/22.913
A.1
EMISSION LIMIT
2.1053/22.917
A.2
Frequency Stability
2.1055/22.355
A.3
Occupied Bandwidth
2.1049/22.917
A.4
Emission Bandwidth
2.1049/22.917
A.5
Band Edge Compliance
2.1051/22.917
A.6
Conducted Spurious
Emission
2.1051/22.917
A.7
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 10 of 69
WCDMA Band IV
Items
Test Name
Clause in
FCC rules
Section in
this report
Verdict
Output Power
2.1046/27.50(d)
A.1
EMISSION LIMIT
2.1053/27.53(h)
A.2
Frequency Stability
2.1055/27.54
A.3
Occupied Bandwidth
2.1049/27.53(g)
A.4
Emission Bandwidth
2.1049/27.53(g)
A.5
Band Edge Compliance
Conducted Spurious
Emission
2.1051/27.53(h)
A.6
2.1051/27.53(h)
A.7
27.50(d) /KDB971168
D01(5.7.1)
A.8
Peak-to-Average Power
Ratio
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 11 of 69
7. Test Equipments Utilized
NO.
Description
TYPE
Manufacture
series number
CAL DUE
DATE
Test Receiver
ESR7
R&S
101675
2017-07-21
BiLog Antenna
VULB9163
Schwarzbeck
9163 330
2017-04-22
Horn Antenna
3117
ETS-Lindgren
00066585
2019-03-05
Signal Generator
SMR40
R&S
100541
2017-06-27
Fully Anechoic
Chamber
FACT5-2.0
ETS-Lindgren
4166
2018-05-13
Spectrum Analyzer
FSP40
R&S
100378
2017-12-15
Universal Radio
Communication
Tester
CMU200
R&S
114544
2017-09-09
Universal Radio
Communication
Tester
CMU200
R&S
123210
2017-12-25
Spectrum Analyzer
FSU
R&S
200679
2017-12-25
10
Temperature
Chamber
SH-241
ESPECs
92007516
2017-11-29
11
DC Power Supply
U3606A
MY50450012
2017-11-22
Agilent
Technologies
Test software
Item
Name
Vesion
Radiated
EMC32
Version 10.01.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 12 of 69
ANNEX A: MEASUREMENT RESULTS
A.1 OUTPUT POWER
Reference
FCC: CFR Part 2.1046, 22.913, 24.232, 27.50(d)
A.1.1 Summary
During the process of testing, the EUT was controlled via Rhode & Schwarz Digital Radio
Communication tester (CMU-200 or CMW500) to ensure max power transmission and proper
modulation.
This result contains peak output power and EIRP measurements for the EUT. In all cases, output
power is within the specified limits.
A.1.2 Conducted
A.1.2.1 Method of Measurements
The EUT was set up for the max output power with pseudo random data modulation.
These measurements were done at 3 frequencies, 1852.4 MHz, 1880.0MHz and 1907.6MHz for
WCDMA Band II;826.4MHz, 836.6MHz and 846.6MHz for WCDMA Band V and 1712.4MHz,
1740.0MHz and 1752.6MHz for WCDMA Band IV (bottom, middle and top of operational
frequency range).
Limit
According to FCC2.1046.
WCDMA Band II
Measurement result
QPSK
WCDMA
(Band II)
CH
Frequency(MHz)
output power(dBm)
9262
1852.4
23.27
9400
1880.0
23.39
9538
1907.6
23.56
WCDMA Band V
Measurement result
QPSK
WCDMA
(Band V)
CH
Frequency(MHz)
output power(dBm)
4132
826.4
23.35
4183
836.6
23.18
4233
846.6
23.25
CH
Frequency(MHz)
output power(dBm)
1312
1712.4
23.47
1450
1740.0
23.58
1513
1752.6
23.32
WCDMA Band IV
Measurement result
QPSK
WCDMA
(Band IV)
Note: Expanded measurement uncertainty is U = 0.488dB, k = 1.96
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 13 of 69
A.1.3 Radiated
A.1.3.1 Description
This is the test for the maximum radiated power from the EUT.
Rule Part 24.232(b) specifies, "Mobile/portable stations are limited to 2 watts e.i.r.p. Peak power"
and 24.232(c) specifies that "Peak transmit power must be measured over any interval of
continuous transmission using instrumentation calibrated in terms of an rms-equivalent voltage."
Rule Part 22.913(a) specifies ” The ERP of mobile transmitters and auxiliary test transmitters must
not exceed 7 Watts.”
A.1.3.2 Method of Measurement
The measurements procedures in TIA-603-E-2016 are used.
1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the
receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT
for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to
figure below. Detected emissions were maximized at each frequency by rotating the EUT
through 360° and adjusting the receiving antenna polarization. The radiated emission
measurements of all transmit frequencies in three channels (High, Middle, Low) were
measured with peak detector.
2. The EUT is then put into continuously transmitting mode at its maximum power level during
the test. And the maximum value of the receiver should be recorded as (Pr).
3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below.
In the chamber, an substitution antenna for the frequency band of interest is placed at the
reference point of the chamber. An RF Signal source for the frequency band of interest is
connected to the substitution antenna with a cable that has been constructed to not interfere
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 14 of 69
with the radiation pattern of the antenna. A power (PMea) is applied to the input of the
substitution antenna, and adjust the level of the signal generator output until the value of the
receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The
test should be performed by rotating the test item and adjusting the receiving antenna
polarization.
4. A amplifier should be connected to the Signal Source output port. And the cable should be
connect between the Amplifier and the Substitution Antenna.
The cable loss (Pcl) ,the Substitution Antenna Gain (Ga) and the Amplifier Gain (PAg) should be
recorded after test.
The measurement results are obtained as described below:
Power(EIRP)=PMea - PAg - Pcl + Ga
5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15
dBi) and known input power.
6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dB.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 15 of 69
WCDMA Band II-EIRP
Limits
Burst Peak EIRP (dBm)
≤33dBm (2W)
WCDMA Band II
Measurement result
QPSK-Internal Antenna
Frequency(MHz)
PMea(dBm)
Pcl(dB)+ PAg(dB)
Ga Antenna Gain(dB)
EIRP(dBm)
Limit(dBm)
Polarization
1852.40
-2.19
-29.40
0.15
27.36
33.00
1880.00
-2.66
-29.30
0.25
26.89
33.00
1907.60
-1.47
-29.30
0.35
28.18
33.00
Frequency: 1907.60MHz
Peak EIRP(dBm)= PMea(-1.47dBm)-(Pcl+PAg)(-29.30dB)+Ga (0.35dB) =28.18dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
WCDMA Band V-ERP
Limits
Burst Peak ERP (dBm)
≤38.45dBm
WCDMA Band V
Measurement result
QPSK-Internal Antenna
Pcl(dB)+
Frequency(MHz)
PMea(dBm)
Ga Antenna Gain(dB)
Correction(dB)
ERP(dBm)
Limit(dBm)
Polarization
PAg(dB)
826.40
-7.72
-33.60
0.28
2.15
24.02
38.45
836.60
-7.23
-33.50
0.25
2.15
24.37
38.45
846.60
-6.62
-33.50
0.21
2.15
24.94
38.45
Frequency: 846.60MHz
Peak ERP(dBm)= PMea(-6.62dBm)-(Pcl+PAg)(-33.50dB)+Ga (0.21dB)-2.15dB=24.94dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
WCDMA Band IV-EIRP
Limits
Burst Peak EIRP (dBm)
≤30.00dBm
WCDMA Band IV
Measurement result
QPSK-Internal Antenna
Frequency(MHz)
PMea(dBm)
Pcl(dB)+ PAg(dB)
Ga Antenna Gain(dB)
EIRP(dBm)
Limit(dBm)
Polarization
1712.40
-3.76
-29.40
0.39
26.03
30.00
1740.00
-2.51
-29.30
0.27
27.07
30.00
1752.60
-2.12
-29.30
0.17
27.35
30.00
Frequency: 1752.60MHz
Peak EIRP(dBm)= PMea(-2.12dBm)-(Pcl+PAg)(-29.30dB)+Ga (0.17dB)=27.35dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
Note:
The
maximum
value
of
expanded
measurement
uncertainty
for
this
test
item
is
4.92dB(30MHz-3GHz)/4.88dB(3GHz-18GHz)/5.66dB(18GHz-40GHz), k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 16 of 69
WCDMA Band II-EIRP
Limits
Burst Peak EIRP (dBm)
≤33dBm (2W)
WCDMA Band II
Measurement result
QPSK-External Antenna
Frequency(MHz)
PMea(dBm)
Pcl(dB)+ PAg(dB)
Ga Antenna Gain(dB)
EIRP(dBm)
Limit(dBm)
Polarization
1852.40
-4.51
-29.40
0.15
25.04
33.00
1880.00
-1.57
-29.30
0.25
27.98
33.00
1907.60
-1.27
-29.30
0.35
28.38
33.00
Frequency: 1907.60MHz
Peak EIRP(dBm)= PMea(-1.27dBm)-(Pcl+PAg)(-29.30dB)+Ga (0.35dB) =28.38dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
WCDMA Band V-ERP
Limits
Burst Peak ERP (dBm)
≤38.45dBm
WCDMA Band V
Measurement result
QPSK-External Antenna
Pcl(dB)+
Frequency(MHz)
PMea(dBm)
Ga Antenna Gain(dB)
Correction(dB)
ERP(dBm)
Limit(dBm)
Polarization
PAg(dB)
826.40
-6.69
-33.60
0.28
2.15
25.04
38.45
836.60
-6.00
-33.50
0.25
2.15
25.60
38.45
846.60
-6.80
-33.50
0.21
2.15
24.76
38.45
Frequency: 836.60MHz
Peak ERP(dBm)= PMea(-6.00dBm)-(Pcl+PAg)(-33.50dB)+Ga (0.25dB)-2.15dB=25.60dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
WCDMA Band IV-EIRP
Limits
Burst Peak EIRP (dBm)
≤30.00dBm
WCDMA Band IV
Measurement result
QPSK-External Antenna
Frequency(MHz)
PMea(dBm)
Pcl(dB)+ PAg(dB)
Ga Antenna Gain(dB)
EIRP(dBm)
Limit(dBm)
Polarization
1712.40
-5.53
-29.40
0.39
24.26
30.00
1740.00
-5.54
-29.30
0.27
24.03
30.00
1752.60
-4.30
-29.30
0.17
25.18
30.00
Frequency: 1752.60MHz
Peak EIRP(dBm)= PMea(-4.30dBm)-(Pcl+PAg)(-29.30dB)+Ga (0.17dB)=25.18dBm
ANALYZER SETTINGS: RBW = VBW = 5MHz
Note:
The
maximum
value
of
expanded
measurement
uncertainty
for
this
test
item
is
4.92dB(30MHz-3GHz)/4.88dB(3GHz-18GHz)/5.66dB(18GHz-40GHz), k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 17 of 69
A.2 EMISSION LIMIT
Reference
FCC: CFR 2.1053, 22.917, 24.238, 27.53(h).
A.2.1 Measurement Method
The measurements procedures in TIA-603-E-2016 are used.
The spectrum was scanned from 30 MHz to the 10th harmonic of the highest frequency generated
within the equipment. The resolution bandwidth is set as outlined in Part 24.238, Part 22.917 and
Part 27.50.The spectrum was scanned with the mobile station transmitting at carrier frequencies
that pertain to low, mid and high channels of WCDMA Band II, WCDMA Band V and WCDMA
Band IV.
The procedure of radiated spurious emissions is as follows:
1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the
receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT
for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to
figure below. Detected emissions were maximized at each frequency by rotating the EUT
through 360° and adjusting the receiving antenna polarization. The radiated emission
measurements of all non-harmonic and harmonics of the transmit frequency through the 10th
harmonic were measured with peak detector.
2. The EUT is then put into continuously transmitting mode at its maximum power level during
the test. And the maximum value of the receiver should be recorded as (Pr).
3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below.
In the chamber, an substitution antenna for the frequency band of interest is placed at the
reference point of the chamber. An RF Signal source for the frequency band of interest is
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 18 of 69
connected to the substitution antenna with a cable that has been constructed to not interfere
with the radiation pattern of the antenna. A power (PMea) is applied to the input of the
substitution antenna, and adjust the level of the signal generator output until the value of the
receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The
test should be performed by rotating the test item and adjusting the receiving antenna
polarization.
4. The Path loss (Ppl) between the Signal Source with the Substitution Antenna and the
Substitution Antenna Gain (Ga) should be recorded after test.
A amplifier should be connected in for the test.
The Path loss (Ppl) is the summation of the cable loss and the gain of the amplifier.
The measurement results are obtained as described below:
Power(EIRP)=PMea - Ppl + Ga
5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15
dBi) and known input power.
6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dB.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 19 of 69
A.2.2 Measurement Limit
Part 24.238 , Part 22.917 and Part 27.50 specify that the power of any emission outside of the
authorized operating frequency ranges must be attenuated below the transmitting power (P) by a
factor of at least 43 + 10 log(P) dB.
The specification that emissions shall be attenuated below the transmitter power (P) by at least 43
+ 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the
specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a
limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit
of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried
out.
A.2.3 Measurement Results
Radiated emissions measurements were made only at the upper, middle, and lower carrier
frequencies of WCDMA Band II (1852.4 MHz, 1880.0MHz and 1907.6MHz), WCDMA Band
V(826.4MHz, 836.6MHz and 846.6MHz) and WCDMA Band IV (1712.4MHz, 1740.0MHz and
1752.6MHz). It was decided that measurements at these three carrier frequencies would be
sufficient to demonstrate compliance with emissions limits because it was seen that all the
significant spurs occur well outside the band and no radiation was seen from a carrier in one block
of the WCDMA Band II,WCDMA Band V and WCDMA Band IV into any of the other blocks. The
equipment must still, however, meet emissions requirements with the carrier at all frequencies
over which it is capable of operating and it is the manufacturer's responsibility to verify this.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 20 of 69
A.2.4 Measurement Results Table
Frequency
Channel
Frequency Range
Result
Low
30MHz-10GHz
Pass
Middle
30MHz-10GHz
Pass
High
30MHz-10GHz
Pass
Low
30MHz-20GHz
Pass
Middle
30MHz-20GHz
Pass
High
30MHz-20GHz
Pass
Low
Middle
High
30MHz-20GHz
Pass
30MHz-20GHz
Pass
30MHz-20GHz
Pass
WCDMA Band V
WCDMA Band II
WCDMA Band IV
A.2.5 Sweep Table
Working
Frequency
WCDMA Band V
WCDMA Band II
WCDMA Band IV
Subrange (GHz)
RBW
VBW
Sweep time (s)
0.03~1
100KHz
300KHz
10
1-2
1 MHz
3 MHz
2~5
1 MHz
3 MHz
5~8
1 MHz
3 MHz
8~10
1 MHz
3 MHz
0.03~1
100KHz
300KHz
10
1-2
1 MHz
3 MHz
2~5
1 MHz
3 MHz
5~8
1 MHz
3 MHz
8~11
1 MHz
3 MHz
11~14
1 MHz
3 MHz
14~18
1 MHz
3 MHz
18~20
1 MHz
3 MHz
0.03~1
100KHz
300KHz
10
1-2
1 MHz
3 MHz
2~5
1 MHz
3 MHz
5~8
1 MHz
3 MHz
8~11
1 MHz
3 MHz
11~14
1 MHz
3 MHz
14~18
1 MHz
3 MHz
18~20
1 MHz
3 MHz
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 21 of 69
WCDMA BAND II Mode Channel 9262/1852.4MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
16806.94
-33.84
2.90
-0.26
-37.00
-13.00
16972.97
-33.95
2.90
-0.50
-37.35
-13.00
17391.00
-32.63
2.90
-0.98
-36.51
-13.00
17617.41
-32.79
3.20
-1.01
-37.00
-13.00
17795.91
-31.92
3.20
-0.75
-35.87
-13.00
17920.59
-32.33
3.20
-0.64
-36.17
-13.00
WCDMA BAND II Mode Channel 9400/1880MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17200.69
-33.04
2.90
-1.01
-36.95
-13.00
17272.88
-32.77
2.90
-1.01
-36.68
-13.00
17436.28
-32.64
3.20
-1.08
-36.92
-13.00
17599.69
-33.16
3.20
-0.81
-37.17
-13.00
17789.34
-33.14
3.20
-0.75
-37.09
-13.00
17933.06
-32.20
3.20
-0.64
-36.04
-13.00
WCDMA BAND II Mode Channel 9538/1907.6MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
16810.22
-34.11
2.90
-0.26
-37.27
-13.00
17200.69
-33.35
2.90
-1.01
-37.26
-13.00
17371.97
-32.85
2.90
-0.98
-36.73
-13.00
17600.34
-32.50
3.20
-1.01
-36.71
-13.00
17796.56
-32.94
3.20
-0.75
-36.89
-13.00
17925.19
-32.66
3.20
-0.64
-36.50
-13.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 22 of 69
WCDMA BAND V Mode Channel 4132/826.4MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
7037.00
-41.77
1.80
-2.85
-48.57
-13.00
8541.00
-42.80
2.00
-1.77
-48.72
-13.00
8587.00
-42.59
2.00
-1.77
-48.51
-13.00
8675.50
-42.90
2.00
-1.64
-48.69
-13.00
9072.00
-43.01
2.10
-1.42
-48.68
-13.00
9203.50
-43.35
2.10
-1.16
-48.76
-13.00
WCDMA BAND V Mode Channel 4183/836.6MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
7584.50
-42.16
1.80
-2.57
-48.68
-13.00
8096.00
-42.12
1.80
-2.18
-48.25
-13.00
8599.50
-42.40
2.00
-1.77
-48.32
-13.00
9174.00
-42.81
2.10
-1.36
-48.42
-13.00
9268.50
-43.12
2.10
-1.16
-48.53
-13.00
9410.00
-43.55
2.10
-0.86
-48.66
-13.00
WCDMA BAND V Mode Channel 4233/846.6MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
8100.50
-42.49
1.80
-2.15
-48.59
-13.00
8159.00
-41.77
1.80
-2.15
-47.87
-13.00
8629.50
-42.39
2.00
-1.64
-48.18
-13.00
9168.50
-42.51
2.10
-1.36
-48.12
-13.00
9254.50
-42.61
2.10
-1.16
-48.02
-13.00
9311.00
-42.01
2.10
-1.12
-47.38
-13.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 23 of 69
WCDMA BAND IV Mode Channel 1312/1712.4MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
16739.34
-33.83
2.90
-0.26
-36.99
-13.00
17268.28
-33.17
2.90
-1.01
-37.08
-13.00
17449.41
-32.41
3.20
-1.08
-36.69
-13.00
17586.56
-33.52
3.20
-0.81
-37.53
-13.00
17778.84
-32.33
3.20
-0.75
-36.28
-13.00
17929.13
-32.78
3.20
-0.64
-36.62
-13.00
WCDMA BAND IV Mode Channel 1450/1740.0MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17214.47
-33.81
2.90
-1.01
-37.72
-13.00
17263.69
-33.78
2.90
-1.01
-37.69
-13.00
17436.94
-32.97
3.20
-1.08
-37.25
-13.00
17631.19
-32.60
3.20
-1.01
-36.81
-13.00
17782.78
-33.22
3.20
-0.75
-37.17
-13.00
17910.75
-32.03
3.20
-0.64
-35.87
-13.00
WCDMA BAND IV Mode Channel 1513/1752.6MHz(QPSK-Internal Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17172.47
-33.70
2.90
-0.79
-37.39
-13.00
17369.34
-33.21
2.90
-0.98
-37.09
-13.00
17461.22
-33.20
3.20
-1.08
-37.48
-13.00
17618.72
-32.75
3.20
-1.01
-36.96
-13.00
17793.28
-33.36
3.20
-0.75
-37.31
-13.00
17851.03
-32.48
3.20
-0.84
-36.52
-13.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 24 of 69
WCDMA BAND II Mode Channel 9262/1852.4MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17203.31
-33.92
2.90
-1.01
-37.83
-13.00
17274.84
-33.80
2.90
-1.01
-37.71
-13.00
17456.63
-32.91
3.20
-1.08
-37.19
-13.00
17612.81
-33.70
3.20
-1.01
-37.91
-13.00
17769.66
-32.66
3.20
-0.75
-36.61
-13.00
17919.94
-32.14
3.20
-0.64
-35.98
-13.00
WCDMA BAND II Mode Channel 9400/1880MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
16955.25
-35.08
2.90
-0.50
-38.48
-13.00
17183.63
-34.43
2.90
-0.79
-38.12
-13.00
17305.03
-34.41
2.90
-0.98
-38.29
-13.00
17400.19
-33.77
3.20
-1.08
-38.05
-13.00
17769.66
-33.01
3.20
-0.75
-36.96
-13.00
17924.53
-32.77
3.20
-0.64
-36.61
-13.00
WCDMA BAND II Mode Channel 9538/1907.6MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17200.69
-33.84
2.90
-1.01
-37.75
-13.00
17356.22
-34.56
2.90
-0.98
-38.44
-13.00
17394.94
-33.03
2.90
-0.98
-36.91
-13.00
17597.06
-33.77
3.20
-0.81
-37.78
-13.00
17780.16
-33.19
3.20
-0.75
-37.14
-13.00
17921.25
-32.93
3.20
-0.64
-36.77
-13.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 25 of 69
WCDMA BAND V Mode Channel 4132/826.4MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
8112.00
-40.88
1.80
-2.15
-46.98
-13.00
8347.00
-41.80
1.80
-2.04
-47.79
-13.00
8650.00
-41.88
2.00
-1.64
-47.67
-13.00
9164.00
-41.25
2.10
-1.36
-46.86
-13.00
9398.50
-42.33
2.10
-1.12
-47.70
-13.00
9426.00
-42.86
2.10
-0.86
-47.97
-13.00
WCDMA BAND V Mode Channel 4183/836.6MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
8632.00
-41.71
2.00
-1.64
-47.50
-13.00
8743.50
-40.83
2.00
-1.63
-46.61
-13.00
9170.50
-41.84
2.10
-1.36
-47.45
-13.00
9254.50
-42.31
2.10
-1.16
-47.72
-13.00
9401.50
-42.42
2.10
-0.86
-47.53
-13.00
9456.00
-42.63
2.10
-0.86
-47.74
-13.00
WCDMA BAND V Mode Channel 4233/846.6MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
ERP(dBm)
Limit
Polarization
(dBm)
7026.50
-41.27
1.80
-2.85
-48.07
-13.00
8586.50
-41.80
2.00
-1.77
-47.72
-13.00
8827.00
-41.56
2.10
-1.48
-47.29
-13.00
9162.00
-42.42
2.10
-1.36
-48.03
-13.00
9256.00
-42.11
2.10
-1.16
-47.52
-13.00
9374.50
-42.64
2.10
-1.12
-48.01
-13.00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 26 of 69
WCDMA BAND IV Mode Channel 1312/1712.4MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
16792.50
-33.54
2.90
-0.26
-36.70
-13.00
17201.34
-33.18
2.90
-1.01
-37.09
-13.00
17314.88
-32.22
2.90
-0.98
-36.10
-13.00
17463.84
-32.24
3.20
-1.08
-36.52
-13.00
17595.09
-32.21
3.20
-0.81
-36.22
-13.00
17931.09
-30.92
3.20
-0.64
-34.76
-13.00
WCDMA BAND IV Mode Channel 1450/1740.0MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17159.34
-33.53
2.90
-0.79
-37.22
-13.00
17305.69
-33.62
2.90
-0.98
-37.50
-13.00
17461.22
-32.49
3.20
-1.08
-36.77
-13.00
17528.16
-33.22
3.20
-0.81
-37.23
-13.00
17801.16
-32.24
3.20
-0.84
-36.28
-13.00
17927.81
-31.30
3.20
-0.64
-35.14
-13.00
WCDMA BAND IV Mode Channel 1513/1752.6MHz(QPSK-External Antenna)
Frequency(MHz)
PMea(dBm
Path
loss
Antenna
Gain
Peak
EIRP(dBm)
Limit
Polarization
(dBm)
17195.44
-33.02
2.90
-0.79
-36.71
-13.00
17367.38
-34.00
2.90
-0.98
-37.88
-13.00
17413.31
-32.91
3.20
-1.08
-37.19
-13.00
17595.75
-33.28
3.20
-0.81
-37.29
-13.00
17809.03
-33.36
3.20
-0.84
-37.40
-13.00
17922.56
-32.13
3.20
-0.64
-35.97
-13.00
Note: The maximum value of expanded measurement uncertainty for this test item is U =
4.92dB(30MHz-3GHz)/4.88dB(3GHz-18GHz)/5.66dB(18GHz-40GHz), k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 27 of 69
A.3 FREQUENCY STABILITY
Reference
FCC: CFR Part 2.1055, 22.355, 24.235, 27.54
A.3.1 Method of Measurement
In order to measure the carrier frequency under the condition of AFC lock, it is necessary to make
measurements with the EUT in a “call mode”. This is accomplished with the use of R&S CMU200
DIGITAL RADIO COMMUNICATION TESTER.
1. Measure the carrier frequency at room temperature.
2. Subject the EUT to overnight soak at -30℃.
3. With the EUT, powered via nominal voltage, connected to the CMU200 and in a simulated call
on mid channel of WCDMA Band II, WCDMA Band V and WCDMA Band IV, measure the
carrier frequency. These measurements should be made within 2 minutes of Powering up the
EUT, to prevent significant self-warming.
4. Repeat the above measurements at 10℃ increments from -30℃ to +50℃. Allow at least 1 1/2
hours at each temperature, unpowered, before making measurements.
5. Remeasure carrier frequency at room temperature with nominal voltage. Vary supply voltage
from minimum voltage to maximum voltage, in 0.1Volt increments remeasuring carrier
frequency at each voltage. Pause at nominal voltage for 1 1/2 hours unpowered, to allow any
self-heating to stabilize, before continuing.
6. Subject the EUT to overnight soak at +50℃.
7. With the EUT, powered via nominal voltage, connected to the CMU200 and in a simulated call
on the centre channel, measure the carrier frequency. These measurements should be made
within 2 minutes of Powering up the EUT, to prevent significant self-warming.
8. Repeat the above measurements at 10℃ increments from +50℃ to -30℃. Allow at least 1 1/2
hours at each temperature, unpowered, before making measurements.
9. At all temperature levels hold the temperature to +/- 0.5℃ during the measurement procedure.
A.3.2 Measurement Limit
A.3.2.1 For Hand carried battery powered equipment
According to the JTC standard the frequency stability of the carrier shall be accurate to within 0.1
ppm of the received frequency from the base station. This accuracy is sufficient to meet Sec.
24.235, Frequency Stability. The frequency stability shall be sufficient to ensure that the
fundamental emission stays within the authorized frequency block. As this transceiver is
considered "Hand carried, battery powered equipment" Section 2.1055(d)(2) applies. This requires
that the lower voltage for frequency stability testing be specified by the manufacturer. This
transceiver is specified to operate with an input voltage of between10.8VDC and 13.2VDC, with a
nominal voltage of 12.0VDC. Operation above or below these voltage limits is prohibited by
transceiver software in order to prevent improper operation as well as to protect components from
overstress. These voltages represent a tolerance of -10 % and +12.5 %. For the purposes of
measuring frequency stability these voltage limits are to be used.
A.3.2.2 For equipment powered by primary supply voltage
According to the JTC standard the frequency stability of the carrier shall be accurate to within 0.1
ppm of the received frequency from the base station. This accuracy is sufficient to meet Sec.
24.235, Frequency Stability. The frequency stability shall be sufficient to ensure that the
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 28 of 69
fundamental emission stays within the authorized frequency block. For this EUT section
2.1055(d)(1) applies. This requires varying primary supply voltage from 85 to 115 percent of the
nominal value for other than hand carried battery equipment.
A.3.3 Measurement results
WCDMA Band II
Frequency Error vs Voltage-QPSK
Voltage(V)
Frequency error(Hz)
Frequency error(ppm)
10.8
-6
0.007
12.0
-1
0.001
13.2
-18
0.022
temperature(℃)
Frequency error(Hz)
Frequency error(ppm)
-30
-22
0.026
-20
-11
0.013
-10
-7
0.008
-2
0.002
10
-3
0.004
20
0.001
30
-5
0.006
40
-16
0.019
50
-27
0.032
Voltage(V)
Frequency error(Hz)
Frequency error(ppm)
10.8
15
0.008
12.0
-18
0.010
13.2
-7
0.004
temperature(℃)
Frequency error(Hz)
Frequency error(ppm)
-30
0.002
-20
-18
0.010
-10
-22
0.012
-8
0.004
10
-11
0.006
20
-9
0.005
30
0.004
40
16
0.009
50
19
0.010
Frequency Error vs Temperature-QPSK
WCDMA Band V
Frequency Error vs Voltage-QPSK
Frequency Error vs Temperature-QPSK
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 29 of 69
WCDMA Band IV
Frequency Error vs Voltage-QPSK
Voltage(V)
Frequency error(Hz)
Frequency error(ppm)
10.8
-28
0.016
12.0
-11
0.006
13.2
-16
0.009
temperature(℃)
Frequency error(Hz)
Frequency error(ppm)
-30
-3
0.002
-20
-7
0.004
-10
-25
0.014
-33
0.019
10
-7
0.004
20
-3
0.002
30
0.001
40
0.003
50
-19
0.011
Frequency Error vs Temperature-QPSK
Expanded measurement uncertainty is 10Hz, k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 30 of 69
A.4 OCCUPIED BANDWIDTH
Reference
FCC: CFR Part 2.1049, 22.917, 24.238, 27.53(g).
A.4.1 Occupied Bandwidth Results
Occupied bandwidth measurements are only provided for selected frequencies in order to reduce
the amount of submitted data. Data were taken at the extreme and mid frequencies of the US
Cellular/PCS frequency bands. The table below lists the measured 99% BW. Spectrum analyzer
plots are included on the following pages.
The measurement method is from KDB 971168 D01 4.2:
a) The spectrum analyzer center frequency is set to the nominal EUT channel center frequency.
The frequency span for the spectrum analyzer shall be set wide enough to capture all modulation
products including the emission skirts (i.e., two to five times the OBW).
b) The nominal IF filter bandwidth (3 dB RBW) shall be in the range of 1 to 5 % of the anticipated
OBW, and the VBW shall be at least 3 times the RBW.
c) Set the reference level of the instrument as required to keep the signal from exceeding the
maximum input mixer level for linear operation. In general, the peak of the spectral envelope must
be at least 10log (OBW / RBW) below the reference level.
d) Set the detection mode to peak, and the trace mode to max hold.
e) Use the 99 % power bandwidth function of the spectrum analyzer and report the measured
bandwidth.
WCDMA Band II (99% BW)-QPSK
Frequency(MHz)
Occupied Bandwidth (99% BW)( MHz)
1852.4
4.15
1880.0
4.15
1907.6
4.15
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 31 of 69
WCDMA Band Ⅱ
Channel 9262-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
Marker 1 [T1 ]
15.55 dBm
1.851438462 GHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
SWT 5 ms
OBW 4.150641026
Temp 1 [T1 OBW]
5.84
1.850332692
T2 Temp 2 [T1 OBW]
6.17
1.854483333
7.2 dB
20
1 PK
VIEW
20 dB
10
T1
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.8524 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:34:18
Channel 9400-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
T1
10
Marker 1 [T1 ]
16.04 dBm
1.880625000 GHz
OBW 4.150641026
Temp 1 [T1 OBW]
7.19
1.877916667
T2 Temp 2 [T1 OBW]
5.98
1.882067308
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.88 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:38:54
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 32 of 69
Channel 9538-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
10
T1
Marker 1 [T1 ]
16.03 dBm
1.908208974 GHz
OBW 4.150641026
Temp 1 [T1 OBW]
6.29
1.905500641
T2 Temp 2 [T1 OBW]
6.51
1.909651282
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.9076 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:39:41
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 33 of 69
WCDMA Band V(99% BW)-QPSK
Frequency(MHz)
Occupied Bandwidth (99% BW)( MHz)
826.4
4.13
4.15
4.15
836.6
846.6
WCDMA Band V
Channel 4132-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
20 dB
7.2 dB
20
1 PK
VIEW
T1
10
Marker 1 [T1 ]
15.60 dBm
826.992948718 MHz
SWT 5 ms
OBW 4.134615385
Temp 1 [T1 OBW]
6.66
824.332692308
T2 Temp 2 [T1 OBW]
6.45
828.467307692
MHz
dBm
MHz
dBm
LVL
MHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 826.4 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:41:43
Channel 4183-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
SWT 5 ms
T1
10
Marker 1 [T1 ]
15.51 dBm
835.622435897 MHz
OBW 4.150641026
Temp 1 [T1 OBW]
6.41
834.516666667
T2 Temp 2 [T1 OBW]
5.12
838.667307692
7.2 dB
20
1 PK
VIEW
20 dB
MHz
dBm
MHz
dBm
LVL
MHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 836.6 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:45:29
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 34 of 69
Channel 4233-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
T1
10
Marker 1 [T1 ]
15.83 dBm
845.718589744 MHz
OBW 4.150641026
Temp 1 [T1 OBW]
6.61
844.516666667
T2
Temp 2 [T1 OBW]
7.18
848.667307692
7.2 dB
20
1 PK
VIEW
20 dB
MHz
dBm
MHz
dBm
LVL
MHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 846.6 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:46:39
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 35 of 69
WCDMA Band IV(99% BW)-QPSK
Frequency(MHz)
Occupied Bandwidth (99% BW)( MHz)
1712.4
4.15
4.15
4.15
1740.0
1752.6
WCDMA Band IV
Channel 1312-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
OBW 4.150641026
Temp 1 [T1 OBW]
6.33
1.710316667
T2 Temp 2 [T1 OBW]
6.27
1.714467308
T1
10
Marker 1 [T1 ]
15.55 dBm
1.711422436 GHz
SWT 5 ms
7.2 dB
20
1 PK
VIEW
20 dB
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.7124 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:52:12
Channel 1450-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
T1
10
Marker 1 [T1 ]
15.79 dBm
1.740592949 GHz
OBW 4.150641026
Temp 1 [T1 OBW]
6.68
1.737916667
T2 Temp 2 [T1 OBW]
6.81
1.742067308
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.74 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:52:56
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 36 of 69
Channel 1513-Occupied Bandwidth (99% BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
T1
10
Marker 1 [T1 ]
16.00 dBm
1.753208974 GHz
OBW 4.150641026
Temp 1 [T1 OBW]
6.98
1.750532692
T2 Temp 2 [T1 OBW]
6.63
1.754683333
MHz
dBm
GHz
dBm
LVL
GHz
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.7526 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:55:17
Note: Expanded measurement uncertainty is U = 3428Hz, k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 37 of 69
A.5 EMISSION BANDWIDTH
Reference
FCC: CFR Part 2.1049, 22.917, 24.238, 27.53(g).
A.5.1Emission Bandwidth Results
The emission bandwidth is defined as the width of the signal between two points, one below the
carrier center frequency and one above the carrier center frequency, outside of which all
emissions are attenuated at least 26 dB below the transmitter power.
Similar to conducted emissions; Emission bandwidth measurements are only provided for
selected frequencies in order to reduce the amount of submitted data. Data were taken at the
extreme and mid frequencies. Table below lists the measured -26 dB BW. Spectrum analyzer
plots are included on the following pages.
WCDMA Band II (-26 dB BW)-QPSK
Frequency(MHz)
Emission Bandwidth (-26 dB BW)( MHz)
1852.4
4.71
4.71
4.71
1880.0
1907.6
WCDMA Band II
Channel 9262-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
10
T1
Marker 1 [T1 ]
15.72 dBm
1.853008974 GHz
ndB [T1]
26.00
BW
4.711538462
Temp 1 [T1 ndB]
-10.13
1.850044231
Temp 2 [T1 ndB]
-10.91
1.854755769
dB
MHz
dBm
GHz
dBm
GHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.8524 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:36:58
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 38 of 69
Channel 9400-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
Marker 1 [T1 ]
16.28 dBm
1.879038462 GHz
ndB [T1]
26.00
BW
4.711538462
Temp 1 [T1 ndB]
-9.80
1.877644231
Temp 2 [T1 ndB]
-10.37
1.882355769
7.2 dB
20
1 PK
VIEW
20 dB
10
T1
dB
MHz
dBm
GHz
dBm
GHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.88 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:38:27
Channel 9538-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
SWT 5 ms
Marker 1 [T1 ]
16.17 dBm
1.906638462 GHz
ndB [T1]
26.00
BW
4.711538462
Temp 1 [T1 ndB]
-9.83
1.905228205
Temp 2 [T1 ndB]
-8.88
1.909939744
T2
7.2 dB
20
1 PK
VIEW
20 dB
10
T1
dB
MHz
dBm
GHz
dBm
GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.9076 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
03:41:06
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 39 of 69
WCDMA Band V(-26 dB BW)-QPSK
Frequency(MHz)
Emission Bandwidth (-26 dB BW)( MHz)
826.40
4.71
4.71
4.70
836.60
846.60
WCDMA Band V
Channel 4132-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
Marker 1 [T1 ]
15.57 dBm
825.438461538 MHz
ndB [T1]
26.00
BW
4.711538462
Temp 1 [T1 ndB]
-11.33
824.044230769
Temp 2 [T1 ndB]
-11.83
828.755769231
7.2 dB
20
1 PK
VIEW
20 dB
10
T1
dB
MHz
dBm
MHz
dBm
MHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 826.4 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:43:04
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 40 of 69
Channel 4183-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
10
T1
-10
Marker 1 [T1 ]
14.60 dBm
836.263461538 MHz
ndB [T1]
26.00
BW
4.711538462
Temp 1 [T1 ndB]
-11.61
834.244230769
Temp 2 [T1 ndB]
-12.22
838.955769231
7.2 dB
20
1 PK
VIEW
SWT 5 ms
20 dB
dB
MHz
dBm
MHz
dBm
MHz
LVL
T2
-20
-30
3DB
-40
-50
-60
-70
Center 836.6 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:44:41
Channel 4233-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
10
Marker 1 [T1 ]
15.98 dBm
847.208974359 MHz
ndB [T1]
26.00
BW
4.695512821
Temp 1 [T1 ndB]
-10.78
844.244230769
Temp 2 [T1 ndB]
-9.96
848.939743590
dB
MHz
dBm
MHz
dBm
MHz
LVL
T2
T1
-10
-20
-30
3DB
-40
-50
-60
-70
Center 846.6 MHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:48:36
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 41 of 69
WCDMA Band IV(-26 dB BW)-QPSK
Frequency(MHz)
Emission Bandwidth (-26 dB BW)( MHz)
1712.4
4.68
4.68
4.70
1740.0
1752.6
WCDMA Band IV
Channel 1312-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
10
T1
Marker 1 [T1 ]
16.14 dBm
1.713025000 GHz
ndB [T1]
26.00
BW
4.679487179
Temp 1 [T1 ndB]
-9.53
1.710060256
Temp 2 [T1 ndB]
-10.26
1.714739744
dB
MHz
dBm
GHz
dBm
GHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.7124 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:51:17
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 42 of 69
Channel 1450-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
Marker 1 [T1 ]
16.37 dBm
1.739038462 GHz
ndB [T1]
26.00
BW
4.679487179
Temp 1 [T1 ndB]
-8.77
1.737660256
Temp 2 [T1 ndB]
-9.35
1.742339744
7.2 dB
20
1 PK
VIEW
20 dB
10
T1
dB
MHz
dBm
GHz
dBm
GHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.74 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:53:36
Channel 1513-Emission Bandwidth (-26 dB BW)-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
20 dB
SWT 5 ms
7.2 dB
20
1 PK
VIEW
10
T1
Marker 1 [T1 ]
16.10 dBm
1.753208974 GHz
ndB [T1]
26.00
BW
4.695512821
Temp 1 [T1 ndB]
-10.17
1.750244231
Temp 2 [T1 ndB]
-10.09
1.754939744
dB
MHz
dBm
GHz
dBm
GHz
LVL
T2
-10
-20
-30
3DB
-40
-50
-60
-70
Center 1.7526 GHz
Date: 5.MAR.2017
1 MHz/
Span 10 MHz
04:54:32
Note: Expanded measurement uncertainty is U = 3428Hz, k = 2
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 43 of 69
A.6 BAND EDGE COMPLIANCE
Reference
FCC: CFR Part 2.1051, 22.917, 24.238, 27.53(h).
A.6.1 Measurement limit
On any frequency outside frequency band of the US Cellular/PCS spectrum, the power of any
emission shall be attenuated below the transmitter power (P, in Watts) by at least 43+10Log (P)
dB. For all power levels +30 dBm to 0 dBm, this becomes a constant specification limit of -13 dBm.
According to KDB 971168 D01 6.0, a relaxation of the reference bandwidth is often provided for
measurements within a specified frequency range at the edge of the authorized frequency
block/band. This is often implemented by permitting the use of a narrower RBW (typically limited to
a minimum RBW of 1% of the OBW) for measuring the out-of-band emissions without a
requirement to integrate the result over the full reference bandwidth.
A.6.2 Measurement result
Only worst case result is given below
WCDMA BandⅡ
LOW BAND EDGE BLOCK-A (WCDMA BandⅡ)-Channel 9262-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
15 dB
SWT 10 ms
Marker 1 [T1 ]
-17.08 dBm
1.850020192 GHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 1.8524 GHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:45:44
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 44 of 69
HIGH BAND EDGE BLOCK-C (WCDMA BandⅡ) –Channel 9538-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
15 dB
SWT 10 ms
Marker 1 [T1 ]
-17.30 dBm
1.909979808 GHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 1.9076 GHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:45:02
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 45 of 69
WCDMA Band Ⅴ
LOW BAND EDGE BLOCK-A (WCDMA Band Ⅴ)-Channel 4132-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
15 dB
SWT 10 ms
Marker 1 [T1 ]
-15.89 dBm
824.020192308 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 826.4 MHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:53:02
HIGH BAND EDGE BLOCK-C (WCDMA Band Ⅴ) –Channel 4233-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
15 dB
SWT 10 ms
Marker 1 [T1 ]
-16.60 dBm
848.979807692 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 846.6 MHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:49:51
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 46 of 69
WCDMA Band IV
LOW BAND EDGE BLOCK-A (WCDMA Band IV)-Channel 1312-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
25 dBm
Offset
*Att
15 dB
SWT 10 ms
Marker 1 [T1 ]
-15.84 dBm
1.710020192 GHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 1.7124 GHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:47:37
HIGH BAND EDGE BLOCK-C (WCDMA Band IV) –Channel 1513-QPSK
*RBW 50 kHz
*VBW 100 kHz
Ref
*Att
25 dBm
Offset
15 dB
SWT 10 ms
Marker 1 [T1 ]
-16.02 dBm
1.754979808 GHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Center 1.7526 GHz
Date: 5.MAR.2017
1.5 MHz/
Span 15 MHz
03:47:00
Note: Expanded measurement uncertainty is U = 0.488dB(100KHz-2GHz)/1.211dB(2GHz-26.5GHz), k = 1.96
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 47 of 69
A.7 CONDUCTED SPURIOUS EMISSION
Reference
FCC: CFR Part 2.1051, 22.917, 24.238, 27.53(h).
A.7.1 Measurement Method
The following steps outline the procedure used to measure the conducted emissions from the
EUT.
1. Determine frequency range for measurements: From CFR 2.1057 the spectrum should be
investigated from the lowest radio frequency generated in the equipment up to at least the
10th harmonic of the carrier frequency. For the mobile station equipment tested, this equates
to a frequency range of 13 MHz to 9 GHz, data taken from 10 MHz to 25 GHz.
2. Determine EUT transmit frequencies: below outlines the band edge frequencies pertinent to
conducted emissions testing.
3. According to KDB 971168 D01 6.0, the applicable rule part specifies the reference bandwidth
for measuring unwanted emission levels (typically, 100 kHz if the authorized frequency
band/block is at or below 1 GHz and 1 MHz if the authorized frequency band/block is above 1
GHz)
WCDMA Band ⅡTransmitter
Channel
Frequency (MHz)
9262
1852.40
9400
1880.00
9538
1907.60
WCDMA Band ⅤTransmitter
Channel
Frequency (MHz)
4132
826.40
4183
836.60
4233
846.60
WCDMA Band IV Transmitter
Channel
Frequency (MHz)
1312
1712.4
1450
1740.0
1513
1752.6
A.7.2 Measurement Limit
Part 24.238 and Part 22.917 specify that the power of any emission outside of the authorized
operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at
least 43 + 10 log(P) dB.
The specification that emissions shall be attenuated below the transmitter power (P) by at least 43
+ 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the
specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a
limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit
of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried
out.
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 48 of 69
A.7.3 Measurement result
Only worst case result is given below
WCDMA Band Ⅱ
Channel 9262: 30MHz –1GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.72 dBm
891.185897436 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
03:54:36
Channel 9262: 1GHz –2.5GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 5 ms
Marker 1 [T1 ]
-33.23 dBm
2.307692308 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
04:00:26
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 49 of 69
Channel 9262: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-32.04 dBm
3.573717949 GHz
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:01:29
Channel 9262: 7.5GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-33.96 dBm
7.532051282 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:05:21
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 50 of 69
Channel 9262: 10GHz –15GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-32.72 dBm
11.634615385 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
500 MHz/
Stop 15 GHz
04:06:20
Channel 9262: 15GHz –20GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-31.25 dBm
19.887820513 GHz
9.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 15 GHz
Date: 5.MAR.2017
500 MHz/
Stop 20 GHz
06:39:22
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 51 of 69
Channel 9400: 30MHz –1GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.67 dBm
944.038461538 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
Stop 1 GHz
97 MHz/
03:55:34
Channel 9400: 1GHz –2.5GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
35 dB
Marker 1 [T1 ]
-33.10 dBm
1.764423077 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
03:58:49
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 52 of 69
Channel 9400: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-31.79 dBm
3.405448718 GHz
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:02:12
Channel 9400: 7.5GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-33.42 dBm
8.998397436 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:04:31
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 53 of 69
Channel 9400: 10GHz –15GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-33.03 dBm
14.975961538 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
500 MHz/
Stop 15 GHz
04:07:05
Channel 9400: 15GHz –20GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-30.88 dBm
19.070512821 GHz
9.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 15 GHz
Date: 5.MAR.2017
500 MHz/
Stop 20 GHz
04:09:25
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 54 of 69
Channel 9538: 30MHz –1GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.00 dBm
37.772435897 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
Stop 1 GHz
97 MHz/
03:56:56
Channel 9538: 1GHz –2.5GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
SWT 5 ms
35 dB
Marker 1 [T1 ]
-33.20 dBm
1.764423077 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
03:57:57
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 55 of 69
Channel 9538: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-31.99 dBm
3.197115385 GHz
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:02:48
Channel 9538: 7.5GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-34.04 dBm
7.972756410 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:03:44
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 56 of 69
Channel 9538: 10GHz –15GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-33.16 dBm
12.932692308 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
500 MHz/
Stop 15 GHz
04:07:50
Channel 9538: 15GHz –20GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-30.93 dBm
19.959935897 GHz
9.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 15 GHz
Date: 5.MAR.2017
500 MHz/
Stop 20 GHz
04:08:39
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 57 of 69
WCDMA Band Ⅴ
Channel 4132: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-35.02 dBm
872.532051282 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
04:29:58
Channel 4132: 1GHz – 2.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 5 ms
Marker 1 [T1 ]
-30.79 dBm
2.466346154 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
04:34:01
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 58 of 69
Channel 4132: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-32.10 dBm
3.581730769 GHz
8.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:34:47
Channel 4132: 7.5GHz – 10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-34.32 dBm
7.600160256 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:38:41
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 59 of 69
Channel 4183: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-35.37 dBm
883.413461538 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
04:30:45
Channel 4183: 1GHz – 2.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 5 ms
Marker 1 [T1 ]
-30.59 dBm
2.466346154 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
04:33:30
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 60 of 69
Channel 4183: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-32.84 dBm
3.581730769 GHz
8.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:35:22
Channel 4183: 7.5GHz – 10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-33.49 dBm
7.676282051 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30 1
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:37:48
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 61 of 69
Channel 4233: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-35.22 dBm
892.740384615 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
04:31:45
Channel 4233: 1GHz – 2.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 5 ms
Marker 1 [T1 ]
-30.42 dBm
2.466346154 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
150 MHz/
Stop 2.5 GHz
04:33:00
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 62 of 69
Channel 4233: 2.5GHz –7.5GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
*Att
35 dB
SWT 30 ms
Marker 1 [T1 ]
-32.32 dBm
3.269230769 GHz
8.5 dB
Offset
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 2.5 GHz
Date: 5.MAR.2017
500 MHz/
Stop 7.5 GHz
04:36:10
Channel 4233: 7.5GHz – 10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 20 ms
Marker 1 [T1 ]
-34.07 dBm
8.381410256 GHz
9 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 7.5 GHz
Date: 5.MAR.2017
250 MHz/
Stop 10 GHz
04:37:16
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 63 of 69
WCDMA Band IV
Channel 1312: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.53 dBm
948.701923077 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
04:14:32
Channel 1312: 1GHz – 3.6GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 10 ms
Marker 1 [T1 ]
-31.43 dBm
3.333333333 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
260 MHz/
Stop 3.6 GHz
04:20:33
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 64 of 69
Channel 1312: 3.6GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
Marker 1 [T1 ]
-34.02 dBm
8.112820513 GHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 40 ms
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 3.6 GHz
Date: 5.MAR.2017
640 MHz/
Stop 10 GHz
04:21:38
Channel 1312: 10GHz – 18GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 50 ms
Marker 1 [T1 ]
-32.37 dBm
17.217948718 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
800 MHz/
Stop 18 GHz
04:26:37
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 65 of 69
Channel 1450: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.44 dBm
197.884615385 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
Stop 1 GHz
97 MHz/
04:15:32
Channel 1450: 1GHz –3.6GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 10 ms
Marker 1 [T1 ]
-27.51 dBm
2.462500000 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
260 MHz/
Stop 3.6 GHz
04:19:22
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 66 of 69
Channel 1450: 3.6GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 40 ms
Marker 1 [T1 ]
-34.59 dBm
7.507692308 GHz
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 3.6 GHz
Date: 5.MAR.2017
640 MHz/
Stop 10 GHz
04:22:23
Channel 1450: 10GHz – 18GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 50 ms
Marker 1 [T1 ]
-32.84 dBm
14.641025641 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
800 MHz/
Stop 18 GHz
04:25:51
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 67 of 69
Channel 1513: 30MHz –1GHz
Spurious emission limit –13dBm.
NOTE: peak above the limit line is the carrier frequency.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 2.5 ms
Marker 1 [T1 ]
-36.53 dBm
303.589743590 MHz
7.2 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 30 MHz
Date: 5.MAR.2017
97 MHz/
Stop 1 GHz
04:16:26
Channel 1513: 1GHz – 3.6GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
*Att
25 dBm
Offset
35 dB
SWT 10 ms
Marker 1 [T1 ]
-31.63 dBm
3.408333333 GHz
8 dB
20
1 PK
VIEW
10
LVL
10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 1 GHz
Date: 5.MAR.2017
260 MHz/
Stop 3.6 GHz
04:17:38
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 68 of 69
Channel 1513: 3.6GHz –10GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 40 ms
Marker 1 [T1 ]
-33.90 dBm
7.620512821 GHz
8.8 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 3.6 GHz
Date: 5.MAR.2017
640 MHz/
Stop 10 GHz
04:23:06
Channel 1513: 10GHz – 18GHz
Spurious emission limit –13dBm.
*RBW 1 MHz
*VBW 3 MHz
Ref
25 dBm
Offset
*Att
35 dB
SWT 50 ms
Marker 1 [T1 ]
-31.98 dBm
16.923076923 GHz
9.5 dB
20
1 PK
VIEW
10
LVL
-10
22-24
-20
-30
3DB
-40
-50
-60
-70
Start 10 GHz
Date: 5.MAR.2017
800 MHz/
Stop 18 GHz
04:25:13
Note: Expanded measurement uncertainty is U = 0.488dB(100KHz-2GHz)/1.211dB(2GHz-26.5GHz), k = 1.96
©Copyright. All rights reserved by SAICT.
No. I18N00754-UMTS
Page 69 of 69
A.8 PEAK-TO-AVERAGE POWER RATIO
Reference
FCC: CFR Part 24.232, 27.50(d), KDB971168 D01(5.7.1)
The peak-to-average power ratio (PAPR) of the transmitter output power must not exceed 13 dB.
The PAPR measurements should be made using either an instrument with complementary
cumulative distribution function (CCDF) capabilities to determine that PAPR will not exceed 13 dB
for more than 0.1 percent of the time or other Commission approved procedure. The measurement
must be performed using a signal corresponding to the highest PAPR expected during periods of
continuous transmission.
According to KDB 971168 D01 5.7.1:
a)Refer to instrument’s analyzer instruction manual for details on how to use the power
statistics/CCDF function;
b) Set resolution/measurement bandwidth ≥ signal’s occupied bandwidth;
c) Set the number of counts to a value that stabilizes the measured CCDF curve;
d) Set the measurement interval to 1 ms
e)Record the maximum PAPR level associated with a probability of 0.1%
A.8.1 Measurement limit
not exceed 13 dB
A.8.2 Measurement results
WCDMA Band II
Measurement result-QPSK
WCDMA
(Band II)
CH
Frequency(MHz)
PAPR(dB)
9400
1880.0
3.49
CH
Frequency(MHz)
PAPR(dB)
1450
1740.0
3.59
WCDMA Band IV
Measurement result-QPSK
WCDMA
(Band IV)
Note: Expanded measurement uncertainty is U = 0.483, k = 2
***END OF REPORT***
©Copyright. All rights reserved by SAICT.
Download: B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Mirror Download [FCC.gov]B612S-52D LTE CPE Test Report EMC2001239 Huawei Technologies Co.,Ltd
Document ID3880800
Application IDG1WN8Xvhnk3Jv1gOvXB7eQ==
Document DescriptionTest Report UMTS
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize216.21kB (2702591 bits)
Date Submitted2018-06-08 00:00:00
Date Available2018-06-08 00:00:00
Creation Date2018-05-28 10:56:25
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-06-04 20:01:18
Document TitleEMC2001239
Document CreatorAcrobat PDFMaker 18 Word 版
Document Author: Liubaodian

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Liubaodian
Category                        : 
Comments                        : 
Company                         : Telecommunication Metrology Center
Create Date                     : 2018:05:28 10:56:25+08:00
KSO Product Build Ver           : 2052-10.1.0.5603
Manager                         : 
Modify Date                     : 2018:06:04 20:01:18+08:00
Source Modified                 : D:20180528022937
Subject                         : Test Report of Base Station Controller(ZTE)
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2018:06:04 20:01:18+08:00
Creator Tool                    : Acrobat PDFMaker 18 Word 版
Document ID                     : uuid:8a494161-2fba-461a-ae8f-802a5ee550f6
Instance ID                     : uuid:348f39d2-580d-4672-a175-00c17f70fed5
Format                          : application/pdf
Title                           : EMC2001239
Description                     : Test Report of Base Station Controller(ZTE)
Creator                         : Liubaodian
Producer                        : Adobe PDF Library 15.0
Keywords                        : 
Headline                        : Test Report of Base Station Controller(ZTE)
Page Layout                     : OneColumn
Page Count                      : 69