FCC ID QISEM770W

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Power listed is conducted.

Class II Change: This Class II Change provides a SAR Report in order to establish Portable Operation and Co-Location provisions for this HSPA module in a composite configuration with previously approved modular devices. Co-location provision includes use with the composite Bluetooth transmitter, FCC ID: QDS-BRCM1043 and WLAN module FCC ID:TX2-RTL8191SE or FCC ID:PPD-AR5BHB92 in this Host Tablet Model EM770W. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within this host device, must not be co-located except as described in this filing. Separate approval is required for all other operating configurations. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Maximum Output Power is: Part 22(H): 0.72W ERP and Part 24(E): 1.63W EIRP. Worse case SAR value is: Part 24(E) Body: 1.47 W/kg. Part 22(H) Body: 1.35 W/kg.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Power listed is conducted.

Class II Change: This Class II Change provides a SAR Report in order to establish Portable Operation and Co-Location provisions for this HSPA module in a composite configuration with previously approved modular devices. Co-location provision includes use with the composite Bluetooth transmitter, FCC ID: QDS-BRCM1043 and WLAN module FCC ID:TX2-RTL8191SE or FCC ID:PPD-AR5BHB92 in this Host Tablet Model EM770W. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within this host device, must not be co-located except as described in this filing. Separate approval is required for all other operating configurations. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Maximum Output Power is: Part 22(H): 0.72W ERP and Part 24(E): 1.63W EIRP. Worse case SAR value is: Part 24(E) Body: 1.47 W/kg. Part 22(H) Body: 1.35 W/kg.

This Class II Permissive Change adds a new tablet host configuration. Approval is limited to Grantee or OEM installation only. GSM/GPRS functions must be disabled by firmware. The highest reported body SAR values with 0cm spacing are: Part 22: 1.29W/kg; Part 24: 1.46 W/kg

This Class II Permissive Change adds a new tablet host configuration. Approval is limited to Grantee or OEM installation only. GSM/GPRS functions must be disabled by firmware. The highest reported body SAR values with 0cm spacing are: Part 22: 1.29W/kg; Part 24: 1.46 W/kg

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations

Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, or new application if appropriate.

Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations

Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, or new application if appropriate.

Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This C2PC adds a new laptop host configuration model EFIKA MX. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in this filing. The highest reported body SAR values for filings under this FCC ID are: Part 22 Body: 0.056 W/kg; WCDMA 850 Band Body: 0.036 W/kg; PCS Band Body: 0.118 W/kg; WCDMA 1900 Band Body:0.264 W/kg.

This C2PC adds a new laptop host configuration model EFIKA MX. Approval is limited to Grantee or OEM installation only. In order to allow user installation of transmitter module, the final host device must utilize the Bios Locking feature as documented in this filing. The highest reported body SAR values for filings under this FCC ID are: Part 22 Body: 0.056 W/kg; WCDMA 850 Band Body: 0.036 W/kg; PCS Band Body: 0.118 W/kg; WCDMA 1900 Band Body:0.264 W/kg.

This Class II Permissive Change adds a new Data Collection Terminal host in an RF category Mobile configuration. Approval is limited to Grantee or OEM installation only. Portable operations are prohibited.

This Class II Permissive Change adds a new Data Collection Terminal host in an RF category Mobile configuration. Approval is limited to Grantee or OEM installation only. Portable operations are prohibited.