FCC ID QISETS2252

CDMA 1X digital mobile phone

by Huawei Technologies Co.,Ltd

Grantee Code: QIS   Product Code: ETS2252
Latest application date: 2008-01-17

FCC ID Device Details

FCC IDQISETS2252
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIS
Product CodeETS2252
Applicant BusinessHuawei Technologies Co.,Ltd 🇨🇳
Related Domains huawei.com
Equipment ClassCDMA 1X digital mobile phone
Test FirmHuawei Technologies Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzOriginal Equipment2008-01-17

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2008-01-17PDF 232.6 KB
Internal PhotosInternal Photos2008-01-17PDF 413.7 KB
External PhotosExternal Photos2008-01-17PDF 266.2 KB
LabelID Label/Location Info2008-01-17PDF 37.5 KB
Label LocationID Label/Location Info2008-01-17PDF 32 KB
Test Setup PhotosTest Setup Photos2008-01-17PDF 101.3 KB
Test Data Appendix A Rev 1Test Report2008-01-17PDF 163.8 KB
Test Data Appendix B Rev 1Test Report2008-01-17PDF 127.1 KB
Test Data Appendix C Rev 1Test Report2008-01-17PDF 240.4 KB
Test Data Appendix D Rev 1Test Report2008-01-17PDF 783.4 KB
Test Data Appendix E Rev 1Test Report2008-01-17PDF 282.2 KB
Test Data Appendix F Rev 1Test Report2008-01-17PDF 40.5 KB
Test Data Appendix G Rev 1Test Report2008-01-17PDF 23.7 KB
Test Report Rev 1Test Report2008-01-17PDF 278.1 KB
Agent Authorization LetterCover Letter(s)2008-01-17PDF 16 KB
Confidentiality Request LetterCover Letter(s)2008-01-17PDF 16.2 KB
Request to SupersedeCover Letter(s)2008-01-17PDF 30.9 KB
Supersede request from CustomerCover Letter(s)2008-01-17PDF 14 KB
RF Exposure InformationRF Exposure Info2008-01-17PDF 32.2 KB

Application Information

Application IDw+J/xeXLMFUUe8A2VCkLIw==
Final Action Date2008-01-17
Application PurposeOriginal Equipment
Applicant FRN0007419963
ModelETS2252
Frequency Range824.7-848.31 MHz
Equipment ClassTNE - Licensed Non-Broadcast Transmitter Held to Ear
Device DescriptionCDMA 1X digital mobile phone
Responsible PartyZhang Xinghai, zhangxinghai@huawei.com , +86-755-2897-0299
Technical ContactLawrence Lu, Huawei Technologies Co., Ltd., Lawrence.Lu@huawei.com , +86-755-89650995
Non-Technical ContactLawrence Lu, Huawei Technologies Co., Ltd., Lawrence.Lu@huawei.com , +86-755-89650995
Test FirmZhou Fengyum, Huawei Technologies Co., LTD, zhoufengyun@huawei.com , 86-755-28782917
TCB EmailTCBInfo@metlabs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is ERP for Part 22. The antenna(s) used for this transmitter is 2.15dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
w+J/xeXLMFUUe8A2VCkLIw==2008-01-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.2500000300.0000000000Hz1M28F9W22H

Grants

TCB Grant - Application w+J/xeXLMFUUe8A2VCkLIw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 01/17/2008

Application Dated: 01/17/2008
Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei
Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISETS2252
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Licensed Non-Broadcast Transmitter Held to Ear
Notes: CDMA 1X digital mobile phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.25 300.0  Hz 1M28F9W

Power Output is ERP for Part 22. The antenna(s) used for this transmitter is 2.15dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application w+J/xeXLMFUUe8A2VCkLIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Huawei Technologies Co.,Ltd
Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District
Shenzhen,
China
  Date of Grant: 01/17/2008

Application Dated: 01/17/2008
 
Attention: Zhang Xinghai

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QISETS2252
Name of Grantee:  Huawei Technologies Co.,Ltd
Equipment Class: Licensed Non-Broadcast Transmitter Held to Ear
Notes: CDMA 1X digital mobile phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.25 300.0  Hz 1M28F9W

Power Output is ERP for Part 22. The antenna(s) used for this transmitter is 2.15dBi gain and must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: