MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Smart Phone

FCC ID Filing: QISMHA-L09
Purchase on Amazon: Smart Phone

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 2 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 3 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 4 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 5 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 6 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 7 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 8 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 9 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 10 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 11 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 12 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 13 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 14 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 15 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 16 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 17 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 18 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 19 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 20 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 21 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 22 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 23 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 24 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 25 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 26 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Page 27 of MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd

Appendix No.: SYBH(Z-SAR)026082016-2A
Appendix A. System Check Plots
Table of contents
SystemPerformanceCheck-D750-EX-Head
SystemPerformanceCheck-D750-EX-Body
SystemPerformanceCheck-D835-EX-Head
SystemPerformanceCheck-D835-EX-Head
SystemPerformanceCheck-D835-EX-Head
SystemPerformanceCheck-D835-EX-Head
SystemPerformanceCheck-D835-EX-Body
SystemPerformanceCheck-D835-EX-Body
SystemPerformanceCheck-D1750-EX-Head
SystemPerformanceCheck-D1750-EX-Body
SystemPerformanceCheck-D1900-EX-Head
SystemPerformanceCheck-D1900-ES-Head
SystemPerformanceCheck-D1900-EX-Head
SystemPerformanceCheck-D1900-EX-Body
SystemPerformanceCheck-D1900-EX-Body
SystemPerformanceCheck-D1900-EX-Body
SystemPerformanceCheck-D2450-ES-Head
SystemPerformanceCheck-D2450-ES-Body
SystemPerformanceCheck-D2600-ES-Head
SystemPerformanceCheck-D2600-ES-Body
SystemPerformanceCheck-D5250-EX-Head
SystemPerformanceCheck-D5250-EX-Body
SystemPerformanceCheck-D5600-EX-Head
SystemPerformanceCheck-D5600-EX-Body
SystemPerformanceCheck-D5750-EX-Head
SystemPerformanceCheck-D5750-EX-Body
FCC ID:QISMHA-L09
Date: 2016-8-30
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D750-EX-Head
DUT: Dipole 750 MHz D750V3; Type: D750V3; Serial: D750V3 - SN:1132
Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 750 MHz; σ = 0.894 S/m; εr = 43.171; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(9.7, 9.7, 9.7); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.64 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 50.72 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 3.19 W/kg
SAR(1 g) = 2.14 W/kg; SAR(10 g) = 1.41 W/kg
Maximum value of SAR (measured) = 2.85 W/kg
0 dB = 2.85 W/kg = 4.55 dBW/kg
Date: 2016-8-31
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D750-EX-Body
DUT: Dipole 750 MHz D750V3; Type: D750V3; Serial: D750V3 - SN:1132
Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 750 MHz; σ = 0.976 S/m; εr = 53.698; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(9.03, 9.03, 9.03); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.77 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 48.40 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 3.40 W/kg
SAR(1 g) = 2.2 W/kg; SAR(10 g) = 1.44 W/kg
Maximum value of SAR (measured) = 3.00 W/kg
0 dB = 3.00 W/kg = 4.77 dBW/kg
Date: 2016-8-9
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Head
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.916 S/m; εr = 40.477; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(8.86, 8.86, 8.86); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.96 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 52.47 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 3.62 W/kg
SAR(1 g) = 2.38 W/kg; SAR(10 g) = 1.55 W/kg
Maximum value of SAR (measured) = 3.20 W/kg
0 dB = 3.20 W/kg = 5.05 dBW/kg
Date: 2016-8-11
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Head
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.915 S/m; εr = 40.627; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(9.17, 9.17, 9.17); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 3.01 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 54.11 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 3.94 W/kg
SAR(1 g) = 2.5 W/kg; SAR(10 g) = 1.62 W/kg
Maximum value of SAR (measured) = 3.42 W/kg
0 dB = 3.42 W/kg = 5.34 dBW/kg
Date: 2016-8-15
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Head
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.912 S/m; εr = 40.707; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(9.17, 9.17, 9.17); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.91 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 53.49 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 3.84 W/kg
SAR(1 g) = 2.43 W/kg; SAR(10 g) = 1.57 W/kg
Maximum value of SAR (measured) = 3.34 W/kg
0 dB = 3.34 W/kg = 5.24 dBW/kg
Date: 2016-8-18
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Head
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.916 S/m; εr = 42.191; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(9.17, 9.17, 9.17); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 3.20 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 52.62 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 3.98 W/kg
SAR(1 g) = 2.48 W/kg; SAR(10 g) = 1.6 W/kg
Maximum value of SAR (measured) = 3.43 W/kg
0 dB = 3.43 W/kg = 5.35 dBW/kg
Date: 2016-8-16
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Body
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.97 S/m; εr = 54.546; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(9.08, 9.08, 9.08); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 2.86 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 52.91 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 3.76 W/kg
SAR(1 g) = 2.5 W/kg; SAR(10 g) = 1.63 W/kg
Maximum value of SAR (measured) = 3.35 W/kg
0 dB = 3.35 W/kg = 5.25 dBW/kg
Date: 2016-8-20
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D835-EX-Body
DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059
Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium parameters used: f = 835 MHz; σ = 0.993 S/m; εr = 54.346; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(9.08, 9.08, 9.08); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 3.10 W/kg
Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 52.39 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 3.86 W/kg
SAR(1 g) = 2.51 W/kg; SAR(10 g) = 1.63 W/kg
Maximum value of SAR (measured) = 3.40 W/kg
0 dB = 3.40 W/kg = 5.31 dBW/kg
Date: 2016-8-25
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D1750-EX-Head
DUT: Dipole 1750 MHz D1750V2; Type: D1750V2; Serial: D1750V2 - SN:1123
Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1750 MHz; σ = 1.359 S/m; εr = 40.548; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(8.09, 8.09, 8.09); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=10mm pin=250mW/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 8.41 W/kg
Configuration/d=10mm pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 81.49 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 15.1 W/kg
SAR(1 g) = 8.29 W/kg; SAR(10 g) = 4.38 W/kg
Maximum value of SAR (measured) = 10.5 W/kg
0 dB = 10.5 W/kg = 10.21 dBW/kg
Date: 2016-8-28
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D1750-EX-Body
DUT: Dipole 1750 MHz D1750V2; Type: D1750V2; Serial: D1750V2 - SN:1123
Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1750 MHz; σ = 1.433 S/m; εr = 51.702; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(7.61, 7.61, 7.61); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=10mm pin=250mW/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 9.02 W/kg
Configuration/d=10mm pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 81.81 V/m; Power Drift = -0.16 dB
Peak SAR (extrapolated) = 16.1 W/kg
SAR(1 g) = 9.16 W/kg; SAR(10 g) = 4.92 W/kg
Maximum value of SAR (measured) = 11.4 W/kg
0 dB = 11.4 W/kg = 10.57 dBW/kg
Date: 2016-8-10
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-EX-Head
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.387 S/m; εr = 39.781; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3744; ConvF(7.74, 7.74, 7.74); Calibrated: 2016-7-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 14.4 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 85.98 V/m; Power Drift = -0.16 dB
Peak SAR (extrapolated) = 19.8 W/kg
SAR(1 g) = 10.5 W/kg; SAR(10 g) = 5.41 W/kg
Maximum value of SAR (measured) = 16.5 W/kg
0 dB = 16.5 W/kg = 12.17 dBW/kg
Date: 2016-8-21
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-ES-Head
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.412 S/m; εr = 39.661; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: ES3DV3 - SN3168; ConvF(5.13, 5.13, 5.13); Calibrated: 2015-9-28;
Sensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 9.74 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 95.04 V/m; Power Drift = -0.14 dB
Peak SAR (extrapolated) = 18.7 W/kg
SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.34 W/kg
Maximum value of SAR (measured) = 13.0 W/kg
0 dB = 13.0 W/kg = 11.14 dBW/kg
Date: 2016-8-23
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-EX-Head
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.425 S/m; εr = 38.798; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(7.45, 7.45, 7.45); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 12.7 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 90.68 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 20.1 W/kg
SAR(1 g) = 10.7 W/kg; SAR(10 g) = 5.56 W/kg
Maximum value of SAR (measured) = 16.8 W/kg
0 dB = 16.8 W/kg = 12.26 dBW/kg
Date: 2016-8-10
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-EX-Body
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.559 S/m; εr = 52.888; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(7.15, 7.15, 7.15); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 13.2 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 86.46 V/m; Power Drift = -0.18 dB
Peak SAR (extrapolated) = 18.7 W/kg
SAR(1 g) = 10.5 W/kg; SAR(10 g) = 5.54 W/kg
Maximum value of SAR (measured) = 15.7 W/kg
0 dB = 15.7 W/kg = 11.96 dBW/kg
Date: 2016-8-14
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-EX-Body
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.557 S/m; εr = 52.362; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(7.15, 7.15, 7.15); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 12.1 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 85.21 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 19.5 W/kg
SAR(1 g) = 10.8 W/kg; SAR(10 g) = 5.62 W/kg
Maximum value of SAR (measured) = 16.6 W/kg
0 dB = 16.6 W/kg = 12.19 dBW/kg
Date: 2016-8-25
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-1900-EX-Body
DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d091
Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1
Medium parameters used: f = 1900 MHz; σ = 1.544 S/m; εr = 51.345; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(7.15, 7.15, 7.15); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 12.0 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 85.21 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 19.3 W/kg
SAR(1 g) = 10.7 W/kg; SAR(10 g) = 5.58 W/kg
Maximum value of SAR (measured) = 16.4 W/kg
0 dB = 16.4 W/kg = 12.16 dBW/kg
Date: 2016-9-1
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D2450-ES-Head
DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860
Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.838 S/m; εr = 39.01; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: ES3DV3 - SN3168; ConvF(4.55, 4.55, 4.55); Calibrated: 2015-9-28;
Sensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0
Electronics: DAE4 Sn852; Calibrated: 2016-4-20
Phantom: SAM1; Type: SAM; Serial: TP-1475
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 17.1 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 88.20 V/m; Power Drift = -0.17 dB
Peak SAR (extrapolated) = 26.7 W/kg
SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.38 W/kg
Maximum value of SAR (measured) = 17.6 W/kg
0 dB = 17.1 W/kg = 12.33 dBW/kg
Date: 2016-9-3
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D2450-ES-Body
DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860
Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 1.952 S/m; εr = 53.436; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: ES3DV3 - SN3168; ConvF(4.35, 4.35, 4.35); Calibrated: 2015-9-28;
Sensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0
Electronics: DAE4 Sn852; Calibrated: 2016-4-20
Phantom: SAM2; Type: SAM; Serial: TP:1474
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 14.6 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 92.75 V/m; Power Drift = -0.15 dB
Peak SAR (extrapolated) = 26.7 W/kg
SAR(1 g) = 13 W/kg; SAR(10 g) = 6.01 W/kg
Maximum value of SAR (measured) = 17.1 W/kg
0 dB = 14.6 W/kg = 11.64 dBW/kg
Date: 2016-8-23
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D2600-ES-Head
DUT: Dipole 2600 MHz D2600V2; Type: D2600V2; Serial: D2600V2 - SN:1021
Communication System: UID 0, CW; Frequency: 2600 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2600 MHz; σ = 2.013 S/m; εr = 37.669; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: ES3DV3 - SN3168; ConvF(4.48, 4.48, 4.48); Calibrated: 2015-9-28;
Sensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0
Electronics: DAE4 Sn852; Calibrated: 2016-4-20
Phantom: SAM1; Type: SAM; Serial: TP-1475
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (8x11x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 20.4 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 86.70 V/m; Power Drift = -0.19 dB
Peak SAR (extrapolated) = 32.4 W/kg
SAR(1 g) = 15.4 W/kg; SAR(10 g) = 6.91 W/kg
Maximum value of SAR (measured) = 20.7 W/kg
0 dB = 20.4 W/kg = 13.10 dBW/kg
Date: 2016-8-26
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D2600-ES-Body
DUT: Dipole 2600 MHz D2600V2; Type: D2600V2; Serial: D2600V2 - SN:1021
Communication System: UID 0, CW; Frequency: 2600 MHz;Duty Cycle: 1:1
Medium parameters used: f = 2600 MHz; σ = 2.124 S/m; εr = 51.521; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: ES3DV3 - SN3168; ConvF(4.23, 4.23, 4.23); Calibrated: 2015-9-28;
Sensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0
Electronics: DAE4 Sn852; Calibrated: 2016-4-20
Phantom: SAM2; Type: SAM; Serial: TP-1474
DASY52 52.8.8(1222);
Configuration/d=10mm, Pin=250mW/Area Scan (8x11x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (measured) = 18.6 W/kg
Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 82.97 V/m; Power Drift = -0.17 dB
Peak SAR (extrapolated) = 30.6 W/kg
SAR(1 g) = 14.3 W/kg; SAR(10 g) = 6.36 W/kg
Maximum value of SAR (measured) = 19.0 W/kg
0 dB = 18.6 W/kg = 12.70 dBW/kg
Date: 2016-9-2
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5250-EX-Head
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5250 MHz; σ = 4.744 S/m; εr = 35.376; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(4.57, 4.57, 4.57); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5250 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 16.4 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5250 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 68.52 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 35.1 W/kg
SAR(1 g) = 7.91 W/kg; SAR(10 g) = 2.22 W/kg
Maximum value of SAR (measured) = 19.5 W/kg
0 dB = 19.5 W/kg = 12.90 dBW/kg
Date: 2016-9-4
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5250-EX-Body
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5250 MHz; σ = 5.497 S/m; εr = 48.505; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(3.92, 3.92, 3.92); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5250 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 10.6 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5250 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 65.34 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 29.0 W/kg
SAR(1 g) = 7.21 W/kg; SAR(10 g) = 2 W/kg
Maximum value of SAR (measured) = 16.6 W/kg
0 dB = 16.6 W/kg = 12.20 dBW/kg
Date: 2016-9-2
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5600-EX-Head
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.224 S/m; εr = 36.254; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(4.29, 4.29, 4.29); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5600 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 17.6 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5600 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 68.31 V/m; Power Drift = -0.14 dB
Peak SAR (extrapolated) = 39.2 W/kg
SAR(1 g) = 8.47 W/kg; SAR(10 g) = 2.35 W/kg
Maximum value of SAR (measured) = 20.7 W/kg
0 dB = 20.7 W/kg = 13.15 dBW/kg
Date: 2016-9-4
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5600-EX-Body
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.903 S/m; εr = 48.303; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(3.48, 3.48, 3.48); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5600 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 11.3 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5600 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 66.35 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 31.3 W/kg
SAR(1 g) = 7.51 W/kg; SAR(10 g) = 2.06 W/kg
Maximum value of SAR (measured) = 17.8 W/kg
0 dB = 17.8 W/kg = 12.50 dBW/kg
Date: 2016-9-2
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5750-EX-Head
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 5.264 S/m; εr = 36.252; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(4.44, 4.44, 4.44); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM4; Type: SAM; Serial: TP-1620
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5750 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 17.1 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5750 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 68.46 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 37.2 W/kg
SAR(1 g) = 8 W/kg; SAR(10 g) = 2.23 W/kg
Maximum value of SAR (measured) = 19.6 W/kg
0 dB = 19.6 W/kg = 12.93 dBW/kg
Date: 2016-9-4
Test Laboratory: HUAWEI SAR/HAC Lab
SystemPerformanceCheck-D5750-EX-Body
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1155
Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5750 MHz; σ = 5.985 S/m; εr = 49.027; ρ = 1000 kg/m3
Phantom section: Flat Section
DASY Configuration:
Probe: EX3DV4 - SN3736; ConvF(3.6, 3.6, 3.6); Calibrated: 2016-4-26;
Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 25.0
Electronics: DAE4 Sn1236; Calibrated: 2015-11-23
Phantom: SAM3; Type: SAM; Serial: TP-1597
DASY52 52.8.8(1222);
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5750 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 12.3 W/kg
System Performance Check with D5GHzV2 Dipole (graded grid)/d=10mm,
Pin=100mW, f=5750 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm
(8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 69.13 V/m; Power Drift = -0.11 dB
Peak SAR (extrapolated) = 33.7 W/kg
SAR(1 g) = 7.8 W/kg; SAR(10 g) = 2.13 W/kg
Maximum value of SAR (measured) = 18.7 W/kg
0 dB = 18.7 W/kg = 12.72 dBW/kg
Download: MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Mirror Download [FCC.gov]MHA-L09 Smart Phone RF Exposure Info Appendix A. System Check Plots Huawei Technologies Co.,Ltd
Document ID3186109
Application IDZkpXYYxy2NunWCCO/fQsFA==
Document DescriptionRF Exposure Report Appendix A
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize92.11kB (1151421 bits)
Date Submitted2016-11-04 00:00:00
Date Available2016-11-04 00:00:00
Creation Date2016-09-12 13:54:35
Producing SoftwareAcrobat Distiller 10.0.0 (Windows)
Document Lastmod2016-09-23 11:00:43
Document TitleAppendix A. System Check Plots
Document CreatorPScript5.dll Version 5.2.2
Document Author: hWX347284

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : hWX347284
Create Date                     : 2016:09:12 13:54:35+08:00
Modify Date                     : 2016:09:23 11:00:43+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : hWX347284
Title                           : Microsoft Word - Appendix A. System Check Plots
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:09:23 11:00:43+08:00
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:f2237364-0399-4de8-ba5f-6e7970145f08
Instance ID                     : uuid:c06bd744-eeaf-4a28-afb9-b3ef884c308d
Page Count                      : 27
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017