FCC ID QJEAP716102

AP-7161 Access Point

by Zebra Technologies Corporation

Grantee Code: QJE   Product Code: AP716102
Latest application date: 2014-05-23

FCC ID Device Details

FCC IDQJEAP716102
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQJE
Product CodeAP716102
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com motorolasolutions.com
Equipment ClassAP-7161 Access Point
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2014-05-23
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2013-07-01
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2013-04-22
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2013-01-22
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-01-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2012-11-19
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2012-08-15
2412-2462 MHzOriginal Equipment2011-08-03
4940-4990 MHzOriginal Equipment2011-08-03
5745-5805 MHzOriginal Equipment2011-08-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-11-19PDF 864 KB
Installation Guide - AP-7161Users Manual2012-09-30PDF 993.3 KB
User manualUsers Manual2012-08-15PDF 1.2 MB
Internal PhotosInternal Photos2012-09-30PDF 4.1 MB
External PhotosExternal Photos2013-04-22PDF 107.9 KB
External PhotosExternal Photos2012-09-30PDF 1.1 MB
LabelID Label/Location Info2011-08-03PDF 654.8 KB
Label LocationID Label/Location Info2011-08-03PDF 153.2 KB
Test Setup PhotosTest Setup Photos2013-04-22PDF 286.5 KB
Test Setup Photos - Part 15CTest Setup Photos2012-09-30PDF 881.9 KB
Test Setup Photos - Part 90Test Setup Photos2012-09-30PDF 392.1 KB
Test Setup Photos - Part 15ETest Setup Photos2012-01-30PDF 416.8 KB
DFS Test ReportTest Report2014-05-23PDF 432.2 KB
Test ReportTest Report2013-07-01PDF 2 MB
Test ReportTest Report2013-04-22PDF 2 MB
Test ReportTest Report2013-01-22PDF 2.3 MB
Test ReportTest Report2013-01-02PDF 2.5 MB
Test ReportTest Report2012-11-19PDF 5.9 MB
Revised DFSTest Report2012-08-15PDF 1.5 MB
Revised Test ReportTest Report2012-08-15PDF 4.1 MB
Test ReportTest Report2012-08-15PDF 4.7 MB
Test Report Rev. 1Test Report2012-08-15PDF 4.5 MB
Test Report - Part 15C Rev. 4Test Report2011-08-03PDF 3.2 MB
Test Report Part 15E Rev. 2Test Report2011-08-03PDF 2.7 MB
Test Report Part 90Y Rev. 1Test Report2011-08-03PDF 2.2 MB
Declaration LetterAttestation Statements2011-08-03PDF 31.2 KB
Confidentiality Request Metadata onlyCover Letter(s)2014-05-23PDF 96.3 KB
Cover LetterCover Letter(s)2014-05-23PDF 77.3 KB
KDB Approval Metadata onlyCover Letter(s)2014-05-23PDF 15.1 KB
Request ConfidentialityCover Letter(s)2014-05-23PDF 162.4 KB
CIIPC LetterCover Letter(s)2013-07-01PDF 65.1 KB
CIIPC LetterCover Letter(s)2013-01-22PDF 42.1 KB
CIIPC Letter Rev. 1Cover Letter(s)2013-01-22PDF 42.2 KB
CIIPC LetterCover Letter(s)2013-01-02PDF 42.1 KB
CIIPC Letter - AntennasCover Letter(s)2012-11-19PDF 82 KB
CIIPC Letter - UNII 1Cover Letter(s)2012-11-19PDF 42.1 KB
FCC Declaration LetterCover Letter(s)2012-11-19PDF 111.6 KB
Class II Permissive Change LetterCover Letter(s)2012-08-15PDF 41.8 KB
Confidentiality Request LetterCover Letter(s)2012-08-15PDF 41.9 KB
ResponsesCover Letter(s)2012-08-15PDF 468 KB
WNS Outdoor Curriculum MatrixCover Letter(s)2012-08-15PDF 290.9 KB
WNS Training and Certification OverviewCover Letter(s)2012-08-15PDF 452.4 KB
Confidentiality Request LetterCover Letter(s)2011-08-03PDF 17.4 KB
Declaration LetterCover Letter(s)2011-08-03PDF 31.2 KB
Long Term Confidentiality Request LetterCover Letter(s)2011-08-03PDF 17.4 KB
Short Term Confidentiality LetterCover Letter(s)2011-08-03PDF 17.6 KB
Short Term Confidentiality Request LetterCover Letter(s)2011-08-03PDF 17.6 KB
TCB Review QuestionsCover Letter(s)2011-08-03PDF 353.8 KB
Antenna DatasheetRF Exposure Info2013-07-01PDF 103.9 KB
MPERF Exposure Info2013-07-01PDF 103.9 KB
MPERF Exposure Info2013-04-22PDF 103.4 KB
Antenna datasheet Rev. 1RF Exposure Info2013-01-22PDF 41.1 KB
Panel AntennaRF Exposure Info2013-01-22PDF 145.4 KB
VM AntennaRF Exposure Info2013-01-22PDF 197.4 KB
Panel Antenna DatasheetRF Exposure Info2013-01-02PDF 145.4 KB
Vehicle Mount Antenna DatasheetRF Exposure Info2013-01-02PDF 197.4 KB
10.1 dBi AntennaRF Exposure Info2012-11-19PDF 125.1 KB
10.5 dBi AntennaRF Exposure Info2012-11-19PDF 62.4 KB
10.7 dBi AntennaRF Exposure Info2012-11-19PDF 145.4 KB
8.25 dBi AntennaRF Exposure Info2012-11-19PDF 99.4 KB
MPERF Exposure Info2012-11-19PDF 82.6 KB
Antenna Information - Laird_AARF Exposure Info2011-08-03PDF 178.4 KB
Antenna Information - Laird_ABRF Exposure Info2011-08-03PDF 188.1 KB
Antenna Information - OC24527 DataRF Exposure Info2011-08-03PDF 1.5 MB
Antenna Information - OC24527-FNMMO_1RF Exposure Info2011-08-03PDF 54.3 KB
Antenna Information - ODC24M-5S DataRF Exposure Info2011-08-03PDF 1 MB
Antenna Information - S5156WBFNMRF Exposure Info2011-08-03PDF 83.5 KB
Antenna Information - ran4054a_pctel_aRF Exposure Info2011-08-03PDF 152.1 KB
MPERF Exposure Info2011-08-03PDF 284.7 KB
MPERF Exposure Info2011-08-03PDF 283.2 KB
MPE - Part 90YRF Exposure Info2011-08-03PDF 270.9 KB
Operation Description - KDB Metadata onlyOperational DescriptionPDF 15.1 KB
Operation Description - Test Plan Metadata onlyOperational DescriptionPDF 275.3 KB
Operational Description - Functional Metadata onlyOperational DescriptionPDF 135.1 KB
Operational description - Mesh Nodes Metadata onlyOperational DescriptionPDF 512 KB

Application Information

Application IDhYMZazat/Yl8jOQFVvem3w==
Final Action Date2014-05-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015642663
ModelAP716102
Frequency Range5260-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAP-7161 Access Point
Responsible PartyQianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com , 346-260-3543
Technical ContactMark Luksich, Motorola Solutions Inc., txp763@motorolasolutions.com , 631-738-5134
Non-Technical ContactMark Luksich, Motorola Solutions Inc., txp763@motorolasolutions.com , 631-738-5134
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power is conducted. This device has 20MHz and 40 MHz bandwidth modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hYMZazat/Yl8jOQFVvem3w==2014-05-23Class II permissive change or modification of presently authorized equipment
utuO1TSTRFaXhTPJlo47IQ==2013-07-01Class II permissive change or modification of presently authorized equipment
w9kOz+YW8rf0K5KHSZWQ8Q==2013-04-22Class II permissive change or modification of presently authorized equipment
oS0WTIn2wdRmIfSWzFvAdg==2013-01-22Class II permissive change or modification of presently authorized equipment
mxJFeXbRN0yQHucUKdQEiA==2013-01-02Class II permissive change or modification of presently authorized equipment
3OZ44vvRk/ZhsgFqgMOe1A==2012-11-19Class II permissive change or modification of presently authorized equipment
8afPttWIrCfEEFWCYPsUgA==2012-08-15Class II permissive change or modification of presently authorized equipment
f0B2WX5dQ2IwQ8au3NKDhw==2011-08-03Original Equipment
eShT1DFe7O5BrAS7pS5vrg==2011-08-03Original Equipment
eQKPCbgEwg0PrOZl6JMG8g==2011-08-03Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.17715M5W7D15CCC, MO
2412-2462 MHz0.17115M5W7D15CCC, MO
2412-2462 MHz0.15916M5W7D15CCC, MO
2412-2462 MHz0.15316M5W7D15CCC, MO
2412-2462 MHz0.16317M8W7D15CCC, MO
2412-2462 MHz0.16117M8W7D15CCC, MO
2422-2452 MHz0.09636M3W7D15CCC, MO
2422-2452 MHz0.0936M3W7D15CCC, MO
4940-4990 MHz0.02220ppm17M2W7D9MO
4940-4990 MHz0.02420ppm17M9W7D9MO
4940-4990 MHz0.06420ppm16M5W7D9MO
4940-4990 MHz0.06520ppm17M7W7D9MO
5180-5240 MHz0.006115E
5190-5230 MHz0.009515E
5260-5320 MHz0.02115E
5500-5580 MHz0.02215E
5660-5700 MHz0.02115E
5745-5805 MHz0.05816M7W7D15ECC, MO
5745-5825 MHz0.03315CMO
5745-5805 MHz0.05417M7W7D15ECC, MO
5745-5825 MHz0.12116M6W7D15CCC, MO
5745-5825 MHz0.03316M6W7D15CCC, MO
5745-5825 MHz0.12417M7W7D15CCC, MO
5745-5825 MHz0.03317M7W7D15CCC, MO
5755-5815 MHz0.03315CMO
5755-5805 MHz0.11436M4W7D15ECC, MO
5755-5815 MHz0.08936M5W7D15CCC, MO
5755-5815 MHz0.03236M5W7D15CCC, MO

Grants

TCB Grant - Application w9kOz+YW8rf0K5KHSZWQ8Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 04/22/2013

Application Dated: 04/22/2013
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: AP-7161 Outdoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 5745.0  -  5825.0 0.033  
MO 15C 5755.0  -  5815.0 0.033  

Class II permissive change to add point-to-point antenna

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application w9kOz+YW8rf0K5KHSZWQ8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/22/2013

Application Dated: 04/22/2013
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 5745.0  -  5825.0 0.033  
MO 15C 5755.0  -  5815.0 0.033  

Class II permissive change to add point-to-point antenna


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application utuO1TSTRFaXhTPJlo47IQ==

This application does not exist.

EAS Grant - Application utuO1TSTRFaXhTPJlo47IQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 07/01/2013

Application Dated: 06/05/2013
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5260.0  -  5320.0 0.021  
15E 5500.0  -  5580.0 0.022  
15E 5660.0  -  5700.0 0.021  

Output power is conducted. This device has 20MHz and 40 MHz bandwidth modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application oS0WTIn2wdRmIfSWzFvAdg==

This application does not exist.

EAS Grant - Application oS0WTIn2wdRmIfSWzFvAdg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 01/22/2013

Application Dated: 12/12/2012
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5260.0  -  5320.0 0.021  
15E 5500.0  -  5580.0 0.022  
15E 5660.0  -  5700.0 0.021  

Output power is conducted. This device has 20MHz and 40 MHz bandwidth modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application mxJFeXbRN0yQHucUKdQEiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 01/02/2013

Application Dated: 01/02/2013
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Access point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.171   15M5W7D
CC MO 15C 2412.0  -  2462.0 0.153   16M5W7D
CC MO 15C 2412.0  -  2462.0 0.161   17M8W7D
CC MO 15C 2422.0  -  2452.0 0.09   36M3W7D
CC MO 15C 5745.0  -  5825.0 0.033   16M6W7D
CC MO 15C 5745.0  -  5825.0 0.033   17M7W7D
CC MO 15C 5755.0  -  5815.0 0.032   36M5W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II PC to add additional antennas.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application mxJFeXbRN0yQHucUKdQEiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 01/02/2013

Application Dated: 01/02/2013
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Access point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.171   15M5W7D
CC MO 15C 2412.0  -  2462.0 0.153   16M5W7D
CC MO 15C 2412.0  -  2462.0 0.161   17M8W7D
CC MO 15C 2422.0  -  2452.0 0.09   36M3W7D
CC MO 15C 5745.0  -  5825.0 0.033   16M6W7D
CC MO 15C 5745.0  -  5825.0 0.033   17M7W7D
CC MO 15C 5755.0  -  5815.0 0.032   36M5W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II PC to add additional antennas.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application hYMZazat/Yl8jOQFVvem3w==

This application does not exist.

EAS Grant - Application hYMZazat/Yl8jOQFVvem3w==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/23/2014

Application Dated: 03/04/2014
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AP-7161 Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5260.0  -  5320.0 0.021  
15E 5500.0  -  5580.0 0.022  
15E 5660.0  -  5700.0 0.021  

Output power is conducted. This device has 20MHz and 40 MHz bandwidth modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application f0B2WX5dQ2IwQ8au3NKDhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 08/03/2011

Application Dated: 08/02/2011
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.177   15M5W7D
CC MO 15C 2412.0  -  2462.0 0.159   16M5W7D
CC MO 15C 2412.0  -  2462.0 0.163   17M8W7D
CC MO 15C 2422.0  -  2452.0 0.096   36M3W7D
CC MO 15C 5745.0  -  5825.0 0.121   16M6W7D
CC MO 15C 5745.0  -  5825.0 0.124   17M7W7D
CC MO 15C 5755.0  -  5815.0 0.089   36M5W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application f0B2WX5dQ2IwQ8au3NKDhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 08/03/2011

Application Dated: 08/02/2011
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.177   15M5W7D
CC MO 15C 2412.0  -  2462.0 0.159   16M5W7D
CC MO 15C 2412.0  -  2462.0 0.163   17M8W7D
CC MO 15C 2422.0  -  2452.0 0.096   36M3W7D
CC MO 15C 5745.0  -  5825.0 0.121   16M6W7D
CC MO 15C 5745.0  -  5825.0 0.124   17M7W7D
CC MO 15C 5755.0  -  5815.0 0.089   36M5W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application eShT1DFe7O5BrAS7pS5vrg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 08/03/2011

Application Dated: 08/03/2011
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90 4940.0  -  4990.0 0.022 20.0  PM 17M2W7D
MO 90 4940.0  -  4990.0 0.024 20.0  PM 17M9W7D
MO 90 4940.0  -  4990.0 0.064 20.0  PM 16M5W7D
MO 90 4940.0  -  4990.0 0.065 20.0  PM 17M7W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must be provide a separation distance of 28 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eShT1DFe7O5BrAS7pS5vrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 08/03/2011

Application Dated: 08/03/2011
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90 4940.0  -  4990.0 0.022 20.0  PM 17M2W7D
MO 90 4940.0  -  4990.0 0.024 20.0  PM 17M9W7D
MO 90 4940.0  -  4990.0 0.064 20.0  PM 16M5W7D
MO 90 4940.0  -  4990.0 0.065 20.0  PM 17M7W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must be provide a separation distance of 28 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application eQKPCbgEwg0PrOZl6JMG8g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 08/03/2011

Application Dated: 08/03/2011
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5805.0 0.058   16M7W7D
CC MO 15E 5745.0  -  5805.0 0.054   17M7W7D
CC MO 15E 5755.0  -  5805.0 0.114   36M4W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must be installed in fixed outdoor applications and must provide a minimum antenna to user separation distance of 28 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eQKPCbgEwg0PrOZl6JMG8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 08/03/2011

Application Dated: 08/03/2011
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5805.0 0.058   16M7W7D
CC MO 15E 5745.0  -  5805.0 0.054   17M7W7D
CC MO 15E 5755.0  -  5805.0 0.114   36M4W7D

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. Power listed is for a single transmitter. Device under this FCCID contains three identical transmitters, two operating in 3x3 MIMO mode and one operating in 2x2 MIMO mode. Professional installation is required. Only the antennas specified in this filing may be used with this device. The antenna(s) used for this transmitter must be installed in fixed outdoor applications and must provide a minimum antenna to user separation distance of 28 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 8afPttWIrCfEEFWCYPsUgA==

This application does not exist.

EAS Grant - Application 8afPttWIrCfEEFWCYPsUgA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 08/15/2012

Application Dated: 08/29/2011
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mesh AP-7161 Outdoor Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5260.0  -  5320.0 0.021  
15E 5500.0  -  5580.0 0.022  
15E 5660.0  -  5700.0 0.021  

Output power is conducted. This device has 20MHz and 40 MHz bandwidth modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 3OZ44vvRk/ZhsgFqgMOe1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 11/19/2012

Application Dated: 11/19/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0061  
15E 5190.0  -  5230.0 0.0095  

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. The antenna(s) used for this transmitter must be installed to provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Refer to user’s manual for operation when installed in an outdoor environment.

EAS Grant - Application 3OZ44vvRk/ZhsgFqgMOe1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 11/19/2012

Application Dated: 11/19/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QJEAP716102
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0061  
15E 5190.0  -  5230.0 0.0095  

Output power listed is maximum combined conducted. Device is a wireless mesh access point operating in 3x3 MIMO and dual and single chain legacy modes. The antenna(s) used for this transmitter must be installed to provide a minimum antenna to user separation distance of 20 cm. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Refer to user’s manual for operation when installed in an outdoor environment.



Mail To: