FCC ID QJEWMC63000303

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 05/16/2003 Application Dated: 05/16/2003

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QJEWMC63000303
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless PCMCIA Modem Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 05/16/2003 Application Dated: 05/16/2003

Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QJEWMC63000303
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Wireless PCMCIA Modem Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application G7mpIsBwL6xXH8RfqcY/kA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 05/16/2003 Application Dated: 05/16/2003

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QJEWMC63000303
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	Wireless PCMCIA Modem Card

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15C	2410.0  -  2470.0	0.2

Power Output listed is conducted. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 50%. The dipole antenna gain is 1.5dB. Automobile rooftop antennas listed in the filing have maximum gain of 3.0dB. SAR compliance has been established in the laptop computer(s) and PDA configurations with PCMCIA slot configurations (e.g., side near the rear) as tested in this filing, and can be used in laptop computers and PDAs with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. Maximum reported body SAR for Laptop Computer application is 1.203W/kg. Maximum reported Body SAR for PDA configuration is 1.423W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 05/16/2003 Application Dated: 05/16/2003

Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QJEWMC63000303
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	Wireless PCMCIA Modem Card
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15C	2410.0  -  2470.0	0.2

Power Output listed is conducted. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 50%. The dipole antenna gain is 1.5dB. Automobile rooftop antennas listed in the filing have maximum gain of 3.0dB. SAR compliance has been established in the laptop computer(s) and PDA configurations with PCMCIA slot configurations (e.g., side near the rear) as tested in this filing, and can be used in laptop computers and PDAs with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. Maximum reported body SAR for Laptop Computer application is 1.203W/kg. Maximum reported Body SAR for PDA configuration is 1.423W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: