1. FCC ID
  2. QKG
  3. QKGRDX-V1

FCC ID QKGRDX-V1

Mobile Transmitter

by T L Parker Ltd

Grantee Code: QKG   Product Code: RDXV1
Latest application date: 2003-02-10

FCC ID Device Details

FCC IDQKGRDX-V1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQKG
Product CodeRDXV1
Applicant BusinessT L Parker Ltd 🇳🇿
Related Domains tlp.co.nz
Equipment ClassMobile Transmitter
Test FirmEMC Technologies NZ Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzOriginal Equipment2003-02-10
136-174 MHzChange in identification of presently authorized equipment. Original FCC ID: AZ489FT3790 Grant Date: 04/01/19972002-08-14

Exhibits

DocumentTypeAvailableFile
Schematics and technical manual part 1Schematics2003-02-10PDF 580.6 KB
Schematics and technical manual part 2Schematics2003-02-10PDF 817.4 KB
Schematics and technical manual part 3Schematics2003-02-10PDF 1.4 MB
Schematics and technical manual part 4Schematics2003-02-10PDF 1.2 MB
Schematics and technical manual part 5Schematics2003-02-10PDF 952.1 KB
Schematics and technical manual part 6Schematics2003-02-10PDF 3.6 MB
Service manualUsers Manual2003-02-10PDF 613.3 KB
Set up manualParts List/Tune Up Info2003-02-10PDF 831.2 KB
Technical ManualUsers Manual2003-02-10PDF 1.2 MB
Technical manualUsers Manual2003-02-10PDF 1.4 MB
Tune up and setup manual for all 4 radio modulesParts List/Tune Up Info2003-02-10PDF 831.2 KB
User guide with revised safe distanceUsers Manual2003-02-10PDF 421.3 KB
User manualUsers Manual2003-02-10PDF 831.2 KB
User manual with RF hazard warning and 20 cm safe distanceRF Exposure Info2003-02-10PDF 32.3 KB
technical manaualUsers Manual2003-02-10PDF 1.2 MB
Additional internal photographsInternal Photos2003-02-10PDF 2.8 MB
Controller boardInternal Photos2003-02-10PDF 3.3 MB
Radio AssemblyInternal Photos2003-02-10PDF 2.6 MB
Transceiver boardInternal Photos2003-02-10PDF 3 MB
Vocoder boardInternal Photos2003-02-10PDF 2.2 MB
internal photosInternal Photos2003-02-10PDF 146.5 KB
external photosExternal Photos2003-02-10PDF 281 KB
external photos Metadata onlyExternal PhotosPDF 402.5 KB
labelID Label/Location Info2003-02-10PDF 219.5 KB
LABEL LOCATION Metadata onlyID Label/Location InfoPDF 443.2 KB
Carrier generation and stabilitySchematics2003-02-10PDF 813 KB
Circuit descriptionSchematics2003-02-10PDF 34.2 KB
Harmonic suppressionSchematics2003-02-10PDF 662.5 KB
Modulation limiting and LP FilterSchematics2003-02-10PDF 327.5 KB
Power limitingSchematics2003-02-10PDF 1 MB
Operation descriptionOperational Description2003-02-10PDF 38.7 KB
Radiated emission test set upTest Setup Photos2003-02-10PDF 942 KB
Test reportTest Report2003-02-10PDF 663.5 KB
Authorisation to actCover Letter(s)2003-02-10PDF 174 KB
Application letterCover Letter(s)PDF 223.5 KB
Client letterCover Letter(s)PDF 223.5 KB
Previous FCC GrantCover Letter(s)PDF 195.2 KB
MPE recalculated with reference to the 20 cm safe distanceRF Exposure Info2003-02-10PDF 63.6 KB
Parts listParts List/Tune Up Info2003-02-10PDF 26.5 KB
Revised MPE calculationsRF Exposure Info2003-02-10PDF 62.3 KB
Rf exposure informationRF Exposure Info2003-02-10PDF 61.8 KB

Application Information

Application IDy6B/sXkoe84gwRHPzg73Fg==
Final Action Date2003-02-10
Application PurposeOriginal Equipment
Applicant FRN0004971149
ModelRDX-V1
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionMobile Transmitter
Responsible PartyHANS DE ROODE, TECHNICAL MANAGER, HANS@TLP.CO.NZ , 0064-3-358-8082
AgentAndrew Andrew Andrew, EMC Technologies NZ LTd, auklab@ihug.co.nz , 0064-9-360-0862
Test FirmAndrew Cutler, EMC Technologies NZ Ltd., auklab@ihug.co.nz , 64-9-360-0862
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted at antenna terminal. The antenna(s) used for this transmitter module must be installed to provide a separation distance of at least 50 cm from all persons, based on 0 dBi maximum antenna gain, and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
y6B/sXkoe84gwRHPzg73Fg==2003-02-10Original Equipment
EzT6AobL5egCPlbiWczSIw==2002-08-14Change in identification of presently authorized equipment. Original FCC ID: AZ489FT3790 Grant Date: 04/01/1997

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz50.0002%16K0F3E9BF
136-174 MHz55ppm16K0F3E9BF
136-174 MHz50.0002%20K0F1E9BF
136-174 MHz55ppm11K0F3E90.21BF
136-174 MHz50.0002%11K0F3E90.21BF
136-174 MHz55ppm20K0F1E9BF
136-174 MHz50.0002%8K10F1E90.21BF
136-174 MHz55ppm8K10F1E90.21BF
136-174 MHz50.0002%8K10F1D90.21BF

Grants

TCB Grant - Application y6B/sXkoe84gwRHPzg73Fg==

This application does not exist.

EAS Grant - Application y6B/sXkoe84gwRHPzg73Fg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

T L Parker Ltd
36 Sheffield Crescent
Christchurch, 8005
New Zealand 		  Date of Grant: 02/10/2003

Application Dated: 11/06/2002
 
Attention: HANS DE ROODE , TECHNICAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QKGRDX-V1
Name of Grantee:  T L Parker Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mobile Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BF 90 136.0  -  174.0 5.0 5.0  PM 16K0F3E
BF 90.210 136.0  -  174.0 5.0 5.0  PM 11K0F3E
BF 90 136.0  -  174.0 5.0 5.0  PM 20K0F1E
BF 90.210 136.0  -  174.0 5.0 5.0  PM 8K10F1E

Output power is conducted at antenna terminal. The antenna(s) used for this transmitter module must be installed to provide a separation distance of at least 50 cm from all persons, based on 0 dBi maximum antenna gain, and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BF: The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed.

TCB Grant - Application EzT6AobL5egCPlbiWczSIw==

This application does not exist.

EAS Grant - Application EzT6AobL5egCPlbiWczSIw==

This application currently is not in final status.
Mail To: