1. FCC ID
  2. QLN
  3. QLNVP824BWFBR

FCC ID QLNVP824BWFBR

2.4GHz Wi-Fi Bridge/Router

by Vivato, Inc.

Grantee Code: QLN   Product Code: VP824BWFBR
Latest application date: 2004-08-03

FCC ID Device Details

FCC IDQLNVP824BWFBR
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQLN
Product CodeVP824BWFBR
Applicant BusinessVivato, Inc. 🇺🇸
Related Domains vivato.net
Equipment Class2.4GHz Wi-Fi Bridge/Router
Test FirmCompliance Certification Services Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-08-03
2412-2462 MHzOriginal Equipment2003-11-07

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2004-08-03PDF 1.1 MB
User Manual 2Users Manual2004-08-03PDF 1.3 MB
User ManualUsers Manual2003-11-07PDF 2 MB
Internal PhotosInternal Photos2003-11-07PDF 930.1 KB
External PhotosExternal Photos2003-11-07PDF 297 KB
FCC ID label format and locationID Label/Location Info2003-11-07PDF 336 KB
Setup PhotosTest Setup Photos2004-08-03PDF 734.3 KB
Test Setup PhotosTest Setup Photos2003-11-07PDF 293.6 KB
Test ReportTest Report2004-08-03PDF 2.6 MB
Test ReportTest Report2003-11-07PDF 3 MB
Class II Permissive Change LetterCover Letter(s)2004-08-03PDF 95.8 KB
Request for confidentiality letterCover Letter(s)2003-11-07PDF 16.5 KB
TCB Q and ACover Letter(s)2003-11-07PDF 17.1 KB
MPERF Exposure Info2004-08-03PDF 124.5 KB
Antenna SpecificationParts List/Tune Up Info2003-11-07PDF 75.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 37.4 KB
Schematic Diagram Metadata onlySchematicsPDF 659.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 708 KB

Application Information

Application IDnAXYRIWszMlkxy9h9dOo2Q==
Final Action Date2004-08-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004337093
ModelVP824BWFBR
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description2.4GHz Wi-Fi Bridge/Router
Responsible PartyJeffrey A Gilbert, RF Technician, JeffG@vivato.net , 509-343-6013
AgentMike Mike Mike, Compliance Certifiation Services, mheckrotte@ccsemc.com , 408-463-0885
Test FirmSteve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885
TCB Emailmkuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. In this Class II permissive change filing, additional external omni and panel antennas are included in this filing. Professional installatin is required to install external antennas and must maintain at least 1 meter separation distance from transmitting antenna to all person. When the device is sold with 2dBi antenna, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
nAXYRIWszMlkxy9h9dOo2Q==2004-08-03Class II permissive change or modification of presently authorized equipment
+ngjSvqbfkf8GJvXZVMY1A==2003-11-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.280000015CCE
2412-2462 MHz0.2815C

Grants

TCB Grant - Application nAXYRIWszMlkxy9h9dOo2Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 08/03/2004

Application Dated: 08/03/2004
Vivato, Inc.
12610 E. Mirabeau Parkway
Suite 900
Spokane, WA 99216
 
Attention: Jeffrey Gilbert , RF Technician

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QLNVP824BWFBR
Name of Grantee:  Vivato, Inc.
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wi-Fi Bridge/Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.28  
15C 2412.0  -  2462.0 0.28  

Output power listed is conducted. In this Class II permissive change filing, additional external omni and panel antennas are included in this filing. Professional installatin is required to install external antennas and must maintain at least 1 meter separation distance from transmitting antenna to all person. When the device is sold with 2dBi antenna, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application nAXYRIWszMlkxy9h9dOo2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Vivato, Inc.
12610 E. Mirabeau Parkway Suite 900
Spokane, WA 99216
United States 		  Date of Grant: 08/03/2004

Application Dated: 08/03/2004
 
Attention: Jeffrey Gilbert , RF Technician

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QLNVP824BWFBR
Name of Grantee:  Vivato, Inc.
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wi-Fi Bridge/Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.28  
15C 2412.0  -  2462.0 0.28  

Output power listed is conducted. In this Class II permissive change filing, additional external omni and panel antennas are included in this filing. Professional installatin is required to install external antennas and must maintain at least 1 meter separation distance from transmitting antenna to all person. When the device is sold with 2dBi antenna, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application +ngjSvqbfkf8GJvXZVMY1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/07/2003

Application Dated: 11/07/2003
Vivato, Inc.
12610 E. Mirabeau Parkway
Suite 900
Spokane, WA 99216
 
Attention: Jeffrey Gilbert , RF Technician

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QLNVP824BWFBR
Name of Grantee:  Vivato, Inc.
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wi-Fi Bridge/Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.28  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application +ngjSvqbfkf8GJvXZVMY1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Vivato, Inc.
12610 E. Mirabeau Parkway Suite 900
Spokane, WA 99216
United States 		  Date of Grant: 11/07/2003

Application Dated: 11/07/2003
 
Attention: Jeffrey Gilbert , RF Technician

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QLNVP824BWFBR
Name of Grantee:  Vivato, Inc.
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wi-Fi Bridge/Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.28  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: