FCC ID QLYRYRR20IV17

RFID Module

by REYAX TECHNOLOGY CO.,LTD.

Grantee Code: QLY   Product Code: RYRR20IV17
Latest application date: 2025-12-30

FCC ID Device Details

FCC IDQLYRYRR20IV17
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQLY
Product CodeRYRR20IV17
Applicant BusinessREYAX TECHNOLOGY CO.,LTD. 🇹🇼
Related Domains reyax.com mtgelectronics.com
Equipment ClassRFID Module
Test FirmEurofins E&E Wireless Taiwan Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2025-12-30

Exhibits

DocumentTypeAvailableFile
UMUsers Manual2025-12-30PDF 1.1 MB
Internal PhotosInternal Photos2025-12-30PDF 889.6 KB
External PhotosExternal Photos2025-12-30PDF 1.3 MB
Label infoID Label/Location Info2025-12-30PDF 119.6 KB
Test Setup PhotographsTest Setup Photos2025-12-30PDF 619.5 KB
AntennaTest Report2025-12-30PDF 473.1 KB
USRC25D058001_V17_Part 15.225 13.56 MHzTest Report2025-12-30PDF 957.7 KB
Attestation_COVERED_EQUIPMENTAttestation Statements2025-12-30PDF 527 KB
Attestation_Letter_US_AGENTAttestation Statements2025-12-30PDF 245.1 KB
ConfidentialityCover Letter(s)2025-12-30PDF 328 KB
Model_Difference_Declaration_of_Conformity_r1Cover Letter(s)2025-12-30PDF 573.8 KB
Modular_Approval_ChecklistCover Letter(s)2025-12-30PDF 1.3 MB
USSC25D058001_V17_FCC MPERF Exposure Info2025-12-30PDF 407.2 KB
Block diagram Metadata onlyBlock DiagramPDF 79.7 KB
SCH Metadata onlySchematicsPDF 281.7 KB
OP Metadata onlyOperational DescriptionPDF 173.9 KB

Application Information

Application IDz5swa/hYT8O0wjP3xh5umA==
Final Action Date2025-12-30
Application PurposeOriginal Equipment
Applicant FRN0022106066
ModelRYRR20IV17
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionRFID Module
Responsible PartyRitchie Chang, Ritchie@reyax.com , +886-911867815
Non-Technical ContactSpencer Simons, Micro Technology Group, Inc., ssimons@mtgelectronics.com , 508 337-3388
Test FirmFly LU, Eurofins E&E Wireless Taiwan Co., Ltd., Fly.lu@cpt.eurofinsasia.com , +886-3-2710188
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
z5swa/hYT8O0wjP3xh5umA==2025-12-30Original Equipment

Equipment Authorization

FrequencyRules
13.56 MHz15C

Grants

TCB Grant - Application z5swa/hYT8O0wjP3xh5umA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/30/2025

Application Dated: 12/30/2025
REYAX TECHNOLOGY CO.,LTD.
4F.-15, No.26, Ln. 321, Yangguang St., Neihu Dist.
Taipei City, 11491
Taiwan
 
Attention: Ritchie Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QLYRYRR20IV17
Name of Grantee:  REYAX TECHNOLOGY CO.,LTD.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.