FCC ID QMCM2911

Universal Data Transciever

by Beckwith Electric Co., Inc.

Grantee Code: QMC   Product Code: M2911
Latest application date: 2004-11-19

FCC ID Device Details

FCC IDQMCM2911
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQMC
Product CodeM2911
Applicant BusinessBeckwith Electric Co., Inc. 🇺🇸
Related Domains beckwithelectric.com
Equipment ClassUniversal Data Transciever
Test FirmElite Electronic Engineering Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2004-11-19
2400-2483.5 MHzOriginal Equipment2002-11-11

Exhibits

DocumentTypeAvailableFile
Exhibit D Users Manual per 2 1033 b3Users Manual2004-11-19PDF 2.3 MB
users manualUsers Manual2002-11-11PDF 1.4 MB
internal photosInternal Photos2002-11-11PDF 462.4 KB
external photosExternal Photos2002-11-11PDF 211.7 KB
label sample and locationID Label/Location Info2002-11-11PDF 138.1 KB
block diagramBlock Diagram2002-11-11PDF 40 KB
schematicsSchematics2002-11-11PDF 424.3 KB
operational descriptionOperational Description2002-11-11PDF 874.4 KB
Exhibit C RE Test Setup photographsTest Setup Photos2004-11-19PDF 945.4 KB
test setup photosTest Setup Photos2002-11-11PDF 456.4 KB
test setup photos Metadata onlyTest Report2002-11-11PDF 456.4 KB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2004-11-19PDF 2.4 MB
test reportTest Report2002-11-11PDF 1.1 MB
Antenna InformationCover Letter(s)2004-11-19PDF 1.2 MB
Cover Letter Requesting Class II ChangeCover Letter(s)2004-11-19PDF 48.5 KB

Application Information

Application IDm/CCefAGQszVgQ3pRqffFQ==
Final Action Date2004-11-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007627334
ModelM2911
Frequency Range2400-2483.5 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUniversal Data Transciever
Responsible PartyMike Mosele, Compliance Test Engineer, mmosele@beckwithelectric.com , 727-541-9570
Test FirmDaniel Crowder, Elite Electronic Engineering Co., decrowder@elitetest.com , 630-495-9770
TCB Emaildecrowder@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
m/CCefAGQszVgQ3pRqffFQ==2004-11-19Class II permissive change or modification of presently authorized equipment
f9czCeBwrH+BUxxkCYtGUg==2002-11-11Original Equipment

Equipment Authorization

FrequencyOutputRules
2400-2483.5 MHz0.030000015C

Grants

TCB Grant - Application m/CCefAGQszVgQ3pRqffFQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 11/19/2004

Application Dated: 11/19/2004
Beckwith Electric Co., Inc.
6190-118th Avenue North
Largo, FL 33773-3724
 
Attention: Mike Mosele , Compliance Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QMCM2911
Name of Grantee:  Beckwith Electric Co., Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Universal Data Transciever
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.0  -  2483.5 0.03  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application m/CCefAGQszVgQ3pRqffFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Beckwith Electric Co., Inc.
6190-118th Avenue North
Largo, FL 33773-3724
United States
  Date of Grant: 11/19/2004

Application Dated: 11/19/2004
 
Attention: Mike Mosele , Compliance Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QMCM2911
Name of Grantee:  Beckwith Electric Co., Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Universal Data Transciever
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.0  -  2483.5 0.03  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application f9czCeBwrH+BUxxkCYtGUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/11/2002

Application Dated: 11/11/2002
Beckwith Electric Co., Inc.
6190-118th Avenue North
Largo, FL 33773-3724
 
Attention: Mike Mosele , Compliance Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QMCM2911
Name of Grantee:  Beckwith Electric Co., Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DSS Universal Data Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.0  -  2483.5 0.03  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application f9czCeBwrH+BUxxkCYtGUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Beckwith Electric Co., Inc.
6190-118th Avenue North
Largo, FL 33773-3724
United States
  Date of Grant: 11/11/2002

Application Dated: 11/11/2002
 
Attention: Mike Mosele , Compliance Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QMCM2911
Name of Grantee:  Beckwith Electric Co., Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DSS Universal Data Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.0  -  2483.5 0.03  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: