FCC ID QOBZWN3018

In-Wall Smart Dimmer

by Jasco Products Company LLC

Grantee Code: QOB   Product Code: ZWN3018
Latest application date: 2025-01-14

FCC ID Device Details

FCC IDQOBZWN3018
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQOB
Product CodeZWN3018
Applicant BusinessJasco Products Company LLC 🇺🇸
Related Domains byjasco.com
Equipment ClassIn-Wall Smart Dimmer
Test FirmPrecise Testing & Certification Co., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
908.4-916 MHzOriginal Equipment2025-01-14
912-920 MHzOriginal Equipment2025-01-14

Exhibits

DocumentTypeAvailableFile
Users Manual Model 1Users Manual2025-01-14PDF 5.3 MB
Users Manual Model 2Users Manual2025-01-14PDF 5.3 MB
Internal PhotosInternal Photos2025-01-14PDF 2.6 MB
External PhotosExternal Photos2025-01-14PDF 2.5 MB
Label and LocationID Label/Location Info2025-01-14PDF 3.5 MB
Test Setup photosTest Setup Photos2025-01-14PDF 266.7 KB
Antenna SpecificationTest Report2025-01-14PDF 1.3 MB
Test ReportTest Report2025-01-14PDF 4.5 MB
Test ReportTest Report2025-01-14PDF 3.4 MB
Covered Equipment AttestationAttestation Statements2025-01-14PDF 153.1 KB
U.S. Agent Designation AttestationAttestation Statements2025-01-14PDF 122.5 KB
Confidentiality LetterCover Letter(s)2025-01-14PDF 60.4 KB
Model difference LetterCover Letter(s)2025-01-14PDF 73.3 KB
RF Exposure EvaluationRF Exposure Info2025-01-14PDF 460.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 122 KB
Schematics Metadata onlySchematicsPDF 293.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 37 KB

Application Information

Application IDdPAd+E6vgxH6l6pkIiuOWA==
Final Action Date2025-01-14
Application PurposeOriginal Equipment
Applicant FRN0017309360
ModelZWN3018
Frequency Range908.4-916 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionIn-Wall Smart Dimmer
Responsible PartyMark Simpkins, msimpkins@byjasco.com , 405-302-2370
Test FirmChris Du, Precise Testing & Certification Co., LTD., chris.du@ptc-testing.com , +86-769-38808222
TCB EmailTCB@nemko.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF Exposure compliance.

Applications

Application IDDatePurpose
dPAd+E6vgxH6l6pkIiuOWA==2025-01-14Original Equipment
PReG+Ox+6ujzwDEsADxvuQ==2025-01-14Original Equipment

Equipment Authorization

FrequencyOutputRules
908.4-916 MHz15C
912-920 MHz0.000771015C

Grants

TCB Grant - Application PReG+Ox+6ujzwDEsADxvuQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/14/2025

Application Dated: 01/13/2025
Jasco Products Company LLC
10 e memorial road Office
oklahoma city, OK 73114
 
Attention: Mark Simpkins

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOBZWN3018
Name of Grantee:  Jasco Products Company LLC
Equipment Class: Digital Transmission System
Notes: In-Wall Smart Dimmer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 912.0  -  920.0 0.000771  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF Exposure compliance.

EAS Grant - Application PReG+Ox+6ujzwDEsADxvuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Jasco Products Company LLC
10 e memorial road Office
oklahoma city, OK 73114
United States
  Date of Grant: 01/14/2025

Application Dated: 01/13/2025
 
Attention: Mark Simpkins

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOBZWN3018
Name of Grantee:  Jasco Products Company LLC
Equipment Class: Digital Transmission System
Notes: In-Wall Smart Dimmer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 912.0  -  920.0 0.000771  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF Exposure compliance.



TCB Grant - Application dPAd+E6vgxH6l6pkIiuOWA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/14/2025

Application Dated: 01/13/2025
Jasco Products Company LLC
10 e memorial road Office
oklahoma city, OK 73114
 
Attention: Mark Simpkins

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOBZWN3018
Name of Grantee:  Jasco Products Company LLC
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: In-Wall Smart Dimmer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 908.4  -  916.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF Exposure compliance.

EAS Grant - Application dPAd+E6vgxH6l6pkIiuOWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Jasco Products Company LLC
10 e memorial road Office
oklahoma city, OK 73114
United States
  Date of Grant: 01/14/2025

Application Dated: 01/13/2025
 
Attention: Mark Simpkins

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOBZWN3018
Name of Grantee:  Jasco Products Company LLC
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: In-Wall Smart Dimmer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 908.4  -  916.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF Exposure compliance.



Mail To: