FCC ID QOQ13
BGM13S/BGX13S/MGM13S Bluetooth 5.0/IEEE 802.15.4 module
by Silicon Laboratories Finland Oy
Grantee Code: QOQ Product Code: 13
Latest application date: 2018-11-04
FCC ID Device Details
| FCC ID | QOQ13 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QOQ |
| Product Code | 13 |
| Applicant Business | Silicon Laboratories Finland Oy 🇫🇮 |
| Related Domains |  silabs.com |
| Equipment Class | BGM13S/BGX13S/MGM13S Bluetooth 5.0/IEEE 802.15.4 module |
| Test Firm | SGS Fimko Oy |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-11-04 |
| 2402-2480 MHz | Original Equipment | 2018-10-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-10-19 | PDF 781.1 KB |
| External Photos | External Photos | 2018-10-19 | PDF 179.7 KB |
| Label Drawing | ID Label/Location Info | 2018-11-04 | PDF 205.9 KB |
| Label | ID Label/Location Info | 2018-10-19 | PDF 224.9 KB |
| Test Setup Photos | Test Setup Photos | 2018-11-04 | PDF 1 MB |
| Test Photos | Test Setup Photos | 2018-10-19 | PDF 1.1 MB |
| Test Report | Test Report | 2018-11-04 | PDF 4 MB |
| Test Report | Test Report | 2018-10-19 | PDF 4.7 MB |
| C2PC Cover Letter | Cover Letter(s) | 2018-11-04 | PDF 28.2 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2018-11-04 | PDF 130.6 KB |
| Request for Confidentiality | Cover Letter(s) | 2018-11-04 | PDF 57.2 KB |
| Confidentiality of photos | Cover Letter(s) | 2018-10-19 | PDF 32.3 KB |
| Confidentiality request | Cover Letter(s) | 2018-10-19 | PDF 72.8 KB |
| Model numbers | Cover Letter(s) | 2018-10-19 | PDF 41.2 KB |
| Modular Approval letter | Cover Letter(s) | 2018-10-19 | PDF 131 KB |
| RF Exposure Analysis S02 | RF Exposure Info | 2018-11-04 | PDF 127.1 KB |
| RF Exposure Analysis S12 S32 | RF Exposure Info | 2018-11-04 | PDF 127.6 KB |
| RF Exposure 22 | RF Exposure Info | 2018-10-19 | PDF 127.6 KB |
| RF Exposure 32 | RF Exposure Info | 2018-10-19 | PDF 127.6 KB |
| Internal Photos Metadata only | Internal Photos | PDF 193.6 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 360.3 KB | |
| Schematics Metadata only | Schematics | PDF 99 KB | |
| Operation Description Metadata only | Operational Description | PDF 545.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 545.7 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 200.3 KB |
Application Information
| Application ID | z0uAG2ZbtDof7cU9YSH/FQ== |
|---|---|
| Final Action Date | 2018-11-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007782659 |
| Model | 13 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BGM13S/BGX13S/MGM13S Bluetooth 5.0/IEEE 802.15.4 module |
| Responsible Party | Enrico Taddeo, Senior Applications and Certifications Engineer, enrico.taddeo@silabs.com , +358503237669 |
| Technical Contact | Pasi Rahikkala, Silicon Laboratorioes Finland Oy, pasi.rahikkala@silabs.com , 358407047953 |
| Non-Technical Contact | Pasi Rahikkala, Silicon Laboratorioes Finland Oy, pasi.rahikkala@silabs.com , 358407047953 |
| Test Firm | Janne Nyman, SGS Fimko Oy, janne.nyman@sgs.eom  , +358 9 696 361 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location and simultaneous transmission with other transmitters would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application to activate IEEE 802.15.4 functionality by firmware change only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| z0uAG2ZbtDof7cU9YSH/FQ== | 2018-11-04 | Class II permissive change or modification of presently authorized equipment |
| IifNt3BbTjkQiStOns2B6w== | 2018-10-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application z0uAG2ZbtDof7cU9YSH/FQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/04/2018 Application Dated: 11/01/2018 |
| Silicon Laboratories Finland Oy |
| Alberga Business Park, Bertel Jungin aukio 3 |
| Espoo, 02600 Finland |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQ13 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | BGM13S/BGX13S/MGM13S Bluetooth 5.0/IEEE 802.15.4 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.07015 | |||
| 15C | 2405.0 - 2480.0 | 0.06887 |
| Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location and simultaneous transmission with other transmitters would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application to activate IEEE 802.15.4 functionality by firmware change only. |
EAS Grant - Application z0uAG2ZbtDof7cU9YSH/FQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Alberga Business Park, Bertel Jungin aukio 3 Espoo, 02600 Finland |
Date of Grant: 11/04/2018 Application Dated: 11/01/2018 |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQ13 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | BGM13S/BGX13S/MGM13S Bluetooth 5.0/IEEE 802.15.4 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.07015 | |||
| 15C | 2405.0 - 2480.0 | 0.06887 |
| Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location and simultaneous transmission with other transmitters would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application to activate IEEE 802.15.4 functionality by firmware change only. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/19/2018 Application Dated: 10/19/2018 |
| Silicon Laboratories Finland Oy |
| Alberga Business Park, Bertel Jungin aukio 3 |
| Espoo, 02600 Finland |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQ13 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | BGM13S/BGX13S Bluetooth 5.0 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.07015 |
| Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location and simultaneous transmission with other transmitters would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. |
EAS Grant - Application IifNt3BbTjkQiStOns2B6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Alberga Business Park, Bertel Jungin aukio 3 Espoo, 02600 Finland |
Date of Grant: 10/19/2018 Application Dated: 10/19/2018 |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQ13 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Digital Transmission System |
| Notes: | BGM13S/BGX13S Bluetooth 5.0 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.07015 |
| Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location and simultaneous transmission with other transmitters would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. |
| Mail To: |