FCC ID QOQBT121

BT121 Bluetooth Smart Ready Module

by Silicon Laboratories Finland Oy

Grantee Code: QOQ   Product Code: BT121
Latest application date: 2015-06-17

FCC ID Device Details

FCC IDQOQBT121
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQOQ
Product CodeBT121
Applicant BusinessSilicon Laboratories Finland Oy 🇫🇮
Related Domains silabs.com
Equipment ClassBT121 Bluetooth Smart Ready Module
Test FirmSGS Fimko Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2015-06-17
2402-2480 MHzOriginal Equipment2015-06-17

Exhibits

DocumentTypeAvailableFile
DatasheetUsers Manual2015-06-17PDF 1.7 MB
Internal PhotosInternal Photos2015-06-17PDF 164.9 KB
External PhotosExternal Photos2015-06-17PDF 164.9 KB
Label LocationID Label/Location Info2015-06-17PDF 148.6 KB
Test Setup PhotosTest Setup Photos2015-06-17PDF 385.6 KB
Test ReportTest Report2015-06-17PDF 3 MB
Test ReportTest Report2015-06-17PDF 2.5 MB
Modular Approval Cover LetterCover Letter(s)2015-06-17PDF 138.6 KB
Request for ConfidentialityCover Letter(s)2015-06-17PDF 68.8 KB
SAR Test ExclusionRF Exposure Info2015-06-17PDF 99.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 107 KB
Schematics Metadata onlySchematicsPDF 45.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 253.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 141.4 KB

Application Information

Application IDNPEYjTkb/vbakTxvaUvtKw==
Final Action Date2015-06-17
Application PurposeOriginal Equipment
Applicant FRN0007782659
ModelBT121
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBT121 Bluetooth Smart Ready Module
Responsible PartyEnrico Taddeo, Senior Applications and Certifications Engineer, enrico.taddeo@silabs.com , +358503237669
Technical ContactPasi Rahikkala, Silicon Laboratories Finland Oy, pasi.rahikkala@silabs.com , 358407047953
Non-Technical ContactPasi Rahikkala, Silicon Laboratories Finland Oy, pasi.rahikkala@silabs.com , 358407047953
Test FirmJari Merikari, SGS Fimko Ltd, jari.merikari@sgs.com , 35896963212
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is conducted. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
NPEYjTkb/vbakTxvaUvtKw==2015-06-17Original Equipment
+Y7L4Z2Nc66fqF5ph2m/dg==2015-06-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.015000015CCC
2402-2480 MHz0.013000015CCC

Grants

TCB Grant - Application NPEYjTkb/vbakTxvaUvtKw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/17/2015

Application Dated: 06/16/2015
Silicon Laboratories Finland Oy
Alberga Business Park, Bertel Jungin aukio 3
Espoo, 02600
Finland
 
Attention: Enrico Taddeo , Senior Applications and Certifications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOQBT121
Name of Grantee:  Silicon Laboratories Finland Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT121 Bluetooth Smart Ready Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power output is conducted. Single Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NPEYjTkb/vbakTxvaUvtKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silicon Laboratories Finland Oy
Alberga Business Park, Bertel Jungin aukio 3
Espoo, 02600
Finland
  Date of Grant: 06/17/2015

Application Dated: 06/16/2015
 
Attention: Enrico Taddeo , Senior Applications and Certifications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOQBT121
Name of Grantee:  Silicon Laboratories Finland Oy
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT121 Bluetooth Smart Ready Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power output is conducted. Single Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +Y7L4Z2Nc66fqF5ph2m/dg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/17/2015

Application Dated: 06/16/2015
Silicon Laboratories Finland Oy
Alberga Business Park, Bertel Jungin aukio 3
Espoo, 02600
Finland
 
Attention: Enrico Taddeo , Senior Applications and Certifications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOQBT121
Name of Grantee:  Silicon Laboratories Finland Oy
Equipment Class: Digital Transmission System
Notes: BT121 Bluetooth Smart Ready Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Power output is conducted. Single Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +Y7L4Z2Nc66fqF5ph2m/dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silicon Laboratories Finland Oy
Alberga Business Park, Bertel Jungin aukio 3
Espoo, 02600
Finland
  Date of Grant: 06/17/2015

Application Dated: 06/16/2015
 
Attention: Enrico Taddeo , Senior Applications and Certifications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QOQBT121
Name of Grantee:  Silicon Laboratories Finland Oy
Equipment Class: Digital Transmission System
Notes: BT121 Bluetooth Smart Ready Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Power output is conducted. Single Modular Approval.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: