FCC ID QOQWT11
Bluetooth Class I EDR Module
by Silicon Laboratories Finland Oy
Grantee Code: QOQ Product Code: WT11
Latest application date: 2012-03-27
FCC ID Device Details
| FCC ID | QOQWT11 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QOQ |
| Product Code | WT11 |
| Applicant Business | Silicon Laboratories Finland Oy 🇫🇮 |
| Related Domains |  silabs.com  jltmobile.com |
| Equipment Class | Bluetooth Class I EDR Module |
| Test Firm | Nemko Canada Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-03-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2008-04-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2006-12-29 |
| 2402-2480 MHz | Original Equipment | 2006-05-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2006-05-08 | PDF 2 MB |
| internal photo | Internal Photos | 2006-12-29 | PDF 126.4 KB |
| Internal Photos | Internal Photos | 2006-05-08 | PDF 285.8 KB |
| External Photos | External Photos | 2006-05-08 | PDF 285.8 KB |
| Label info | ID Label/Location Info | 2006-05-08 | PDF 111.5 KB |
| Test setup photos | Test Setup Photos | 2006-05-08 | PDF 216.7 KB |
| supplementary testreport | Test Report | 2006-12-29 | PDF 657.7 KB |
| Test report | Test Report | 2006-05-08 | PDF 724.4 KB |
| changes letter | Cover Letter(s) | 2012-03-27 | PDF 256.7 KB |
| summit letter | Cover Letter(s) | 2012-03-27 | PDF 20.1 KB |
| Letter of agency | Cover Letter(s) | 2009-03-17 | PDF 301.1 KB |
| Letter of authorization | Cover Letter(s) | 2009-03-17 | PDF 342.7 KB |
| Agency | Cover Letter(s) | 2009-02-17 | PDF 301.1 KB |
| Authorization | Cover Letter(s) | 2009-02-17 | PDF 342.7 KB |
| Confidentiality | Cover Letter(s) | 2009-02-17 | PDF 49.8 KB |
| Description of change | Cover Letter(s) | 2008-04-11 | PDF 464.5 KB |
| Class II perm change letter | Cover Letter(s) | 2006-12-29 | PDF 274.9 KB |
| Confidentiality Request | Cover Letter(s) | 2006-05-08 | PDF 167.2 KB |
| Modular Approval request | Cover Letter(s) | 2006-05-08 | PDF 284.8 KB |
| POA | Cover Letter(s) | 2006-05-08 | PDF 141 KB |
| BT antenna | Parts List/Tune Up Info | 2012-03-27 | PDF 351.1 KB |
| WLAN antenna | Parts List/Tune Up Info | 2012-03-27 | PDF 730.8 KB |
| mpe calculation | RF Exposure Info | 2012-03-27 | PDF 31.9 KB |
| RF exposure considerations | RF Exposure Info | 2009-03-17 | PDF 37.3 KB |
| RF exposure evaluation | RF Exposure Info | 2009-02-17 | PDF 105.4 KB |
| 802396 MPE calculation | RF Exposure Info | 2008-04-11 | PDF 603.2 KB |
| 803102 MPE calculation | RF Exposure Info | 2008-04-11 | PDF 627.1 KB |
| RF Exposure info | RF Exposure Info | 2006-05-08 | PDF 153 KB |
Application Information
| Application ID | Qrtrh1I3UgFqavpokCLUfQ== |
|---|---|
| Final Action Date | 2012-03-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007782659 |
| Model | WT11 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Class I EDR Module |
| Responsible Party | Pasi Rahikkala, Senior HW Engineer, pasi.rahikkala@silabs.com , +35894355060 |
| Technical Contact | Patrik Alvånger, JLT Mobile Computers AB, Patrik.alvanger@jltmobile.com , 46 470 53 03 25 |
| Non-Technical Contact | Per Holmberg, JLT Mobile Computers AB, Per.holmberg@jltmobile.com , 46 470 53 03 53 |
| Test Firm | Stuart Beck, Nemko Canada Inc, stuart.beck@nemko.com  , 6137379680 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module istallation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Qrtrh1I3UgFqavpokCLUfQ== | 2012-03-27 | Class II permissive change or modification of presently authorized equipment |
| z33GVIiVkBKPuwzXwkbwJA== | 2009-03-17 | Class II permissive change or modification of presently authorized equipment |
| c/mkMf3qqOA4OUq2DLbzrA== | 2009-02-17 | Class II permissive change or modification of presently authorized equipment |
| 72R9p4Mb7dVLoD+JRK2aRQ== | 2008-04-11 | Class II permissive change or modification of presently authorized equipment |
| oqtEOOX/ad7P4tWO3vK80w== | 2006-12-29 | Class II permissive change or modification of presently authorized equipment |
| V+bCx7XC4KmFGVhZWh6sgQ== | 2006-05-08 | Original Equipment |
Grants
TCB Grant - Application z33GVIiVkBKPuwzXwkbwJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 03/17/2009 Application Dated: 03/17/2009 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for use in portable configurations as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application z33GVIiVkBKPuwzXwkbwJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 03/17/2009 Application Dated: 03/17/2009 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for use in portable configurations as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must not be co-located with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/08/2006 Application Dated: 05/08/2006 |
| Silicon Laboratories Finland Oy |
| Alberga Business Park, Bertel Jungin aukio 3 |
| Espoo, 02600 Finland |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by OEM integrators. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter in the same host. OEM integrators and End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users may not be provided with the module installation instructions. |
EAS Grant - Application V+bCx7XC4KmFGVhZWh6sgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Alberga Business Park, Bertel Jungin aukio 3 Espoo, 02600 Finland |
Date of Grant: 05/08/2006 Application Dated: 05/08/2006 |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by OEM integrators. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter in the same host. OEM integrators and End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users may not be provided with the module installation instructions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/27/2012 Application Dated: 03/27/2012 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module istallation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Qrtrh1I3UgFqavpokCLUfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 03/27/2012 Application Dated: 03/27/2012 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module istallation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 12/29/2006 Application Dated: 12/29/2006 |
| Silicon Laboratories Finland Oy |
| Alberga Business Park, Bertel Jungin aukio 3 |
| Espoo, 02600 Finland |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by OEM integrators. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter in the same host. OEM integrators and End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users may not be provided with the module installation instructions. |
EAS Grant - Application oqtEOOX/ad7P4tWO3vK80w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Alberga Business Park, Bertel Jungin aukio 3 Espoo, 02600 Finland |
Date of Grant: 12/29/2006 Application Dated: 12/29/2006 |
| Attention: Enrico Taddeo , Senior Applications and Certifications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.023 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by OEM integrators. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter in the same host. OEM integrators and End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users may not be provided with the module installation instructions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 02/17/2009 Application Dated: 02/17/2009 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application c/mkMf3qqOA4OUq2DLbzrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 02/17/2009 Application Dated: 02/17/2009 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class I EDR module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 04/11/2008 Application Dated: 04/11/2008 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class 1 EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 72R9p4Mb7dVLoD+JRK2aRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 04/11/2008 Application Dated: 04/11/2008 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11 |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Class 1 EDR Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.022 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |