FCC ID QOQWT11IA
Bluetooth module WT11i-A
by Silicon Laboratories Finland Oy
Grantee Code: QOQ Product Code: WT11IA
Latest application date: 2013-05-24
FCC ID Device Details
| FCC ID | QOQWT11IA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QOQ |
| Product Code | WT11IA |
| Applicant Business | Silicon Laboratories Finland Oy 🇫🇮 |
| Related Domains |  silabs.com |
| Equipment Class | Bluetooth module WT11i-A |
| Test Firm | AT4 wireless S.A. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2400-2483.5 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-24 |
| 2400-2483.5 MHz | Class II permissive change or modification of presently authorized equipment | 2012-07-06 |
| 2400-2483.5 MHz | Class II permissive change or modification of presently authorized equipment | 2012-03-27 |
| 2400-2483.5 MHz | Original Equipment | 2011-03-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2013-11-20 | PDF 2.4 MB |
| manual | Users Manual | 2011-03-16 | PDF 354.8 KB |
| Internal photos | Internal Photos | 2013-11-20 | PDF 645.9 KB |
| Internal Photos | Internal Photos | 2011-03-16 | PDF 351.1 KB |
| External photos | External Photos | 2013-11-20 | PDF 643.3 KB |
| external photos | External Photos | 2011-03-16 | PDF 351.1 KB |
| Label | ID Label/Location Info | 2013-05-24 | PDF 907.7 KB |
| ID Label and Location | ID Label/Location Info | 2011-03-16 | PDF 158.7 KB |
| Test setup photos | Test Setup Photos | 2013-11-20 | PDF 1 MB |
| setup photos | Test Setup Photos | 2011-03-16 | PDF 133.7 KB |
| Amended Report | Test Report | 2012-07-06 | PDF 2.1 MB |
| Report | Test Report | 2011-03-16 | PDF 2.5 MB |
| Drug Declaration | Attestation Statements | 2011-03-16 | PDF 206.4 KB |
| Agents letter | Cover Letter(s) | 2013-05-24 | PDF 33.3 KB |
| C2PC letter | Cover Letter(s) | 2013-05-24 | PDF 25.8 KB |
| Confidentiality letter - short term | Cover Letter(s) | 2013-05-24 | PDF 29.3 KB |
| Class II Change Letter | Cover Letter(s) | 2012-07-06 | PDF 32.3 KB |
| changes letter | Cover Letter(s) | 2012-03-27 | PDF 257.3 KB |
| summit letter | Cover Letter(s) | 2012-03-27 | PDF 20.1 KB |
| Confidentiality request | Cover Letter(s) | 2011-03-16 | PDF 248.8 KB |
| Modular approval request | Cover Letter(s) | 2011-03-16 | PDF 1.5 MB |
| SAR report | RF Exposure Info | 2013-05-24 | PDF 1.5 MB |
| BT antenna | Parts List/Tune Up Info | 2012-03-27 | PDF 351.1 KB |
| WLAN antenna | Parts List/Tune Up Info | 2012-03-27 | PDF 730.8 KB |
| mpe calculation | RF Exposure Info | 2012-03-27 | PDF 82.5 KB |
| MPE | RF Exposure Info | 2011-03-16 | PDF 70.4 KB |
Application Information
| Application ID | VTkRczQpu49PtlrLac42LA== |
|---|---|
| Final Action Date | 2013-05-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007782659 |
| Model | WT11IA |
| Frequency Range | 2400-2483.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth module WT11i-A |
| Responsible Party | Pasi Rahikkala, Senior HW Engineer, pasi.rahikkala@silabs.com , +35894355060 |
| Test Firm | Juan Carlos Soler Claros, AT4 wireless S.A., jsoler@at4wireless.com  , 34-9562-619100 |
| TCB Email | technical@babt.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/20/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Class II Permissive Change. Output power listed is conducted. This permissive change provides for Portable use when integrated into a Polar Team2 Transmitter as documented in this filing. This grant is valid only when the module is installed by the OEM or OEM integrators. The OEM integrators must be provided with antenna installation instructions. End-users may not be provided with the module installation instructions. The highest reported SAR is 0.349 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VTkRczQpu49PtlrLac42LA== | 2013-05-24 | Class II permissive change or modification of presently authorized equipment |
| sllQHuUe6YvTJXk5UFNL0A== | 2012-07-06 | Class II permissive change or modification of presently authorized equipment |
| SO7CqM8WtRb3rxKSqyzoaw== | 2012-03-27 | Class II permissive change or modification of presently authorized equipment |
| 1NpWi/w8xVdGgT2ArL2vwg== | 2011-03-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2400-2483.5 MHz | 0.0200000 | 15C |
Grants
TCB Grant - Application VTkRczQpu49PtlrLac42LA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 05/24/2013 Application Dated: 05/24/2013 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module WT11i-A |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Modular Approval. Class II Permissive Change. Output power listed is conducted. This permissive change provides for Portable use when integrated into a Polar Team2 Transmitter as documented in this filing. This grant is valid only when the module is installed by the OEM or OEM integrators. The OEM integrators must be provided with antenna installation instructions. End-users may not be provided with the module installation instructions. The highest reported SAR is 0.349 W/kg. |
EAS Grant - Application VTkRczQpu49PtlrLac42LA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 05/24/2013 Application Dated: 05/24/2013 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth module WT11i-A |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Modular Approval. Class II Permissive Change. Output power listed is conducted. This permissive change provides for Portable use when integrated into a Polar Team2 Transmitter as documented in this filing. This grant is valid only when the module is installed by the OEM or OEM integrators. The OEM integrators must be provided with antenna installation instructions. End-users may not be provided with the module installation instructions. The highest reported SAR is 0.349 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 03/27/2012 Application Dated: 03/27/2012 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module istallation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application SO7CqM8WtRb3rxKSqyzoaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 03/27/2012 Application Dated: 03/27/2012 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Modular Approval. Power output listed is conducted. This permissive change provides for co-location with specific transmitters in a mobile configuration as documented in this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. End-users may not be provided with the module istallation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 07/06/2012 Application Dated: 07/06/2012 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Output power listed is conducted. Modular Approval. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
EAS Grant - Application sllQHuUe6YvTJXk5UFNL0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 07/06/2012 Application Dated: 07/06/2012 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Output power listed is conducted. Modular Approval. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Silicon Laboratories Finland Oy |
| Sinikalliontie 5A |
| Sinikalliontie 5A |
| Espoo, FI-02630 Finland |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
EAS Grant - Application 1NpWi/w8xVdGgT2ArL2vwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silicon Laboratories Finland Oy Sinikalliontie 5A Sinikalliontie 5A Espoo, FI-02630 Finland |
Date of Grant: 03/16/2011 Application Dated: 03/16/2011 |
| Attention: Pasi Rahikkala , Senior HW Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QOQWT11IA |
| Name of Grantee: | Silicon Laboratories Finland Oy |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module WT11i-a |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.02 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
| Mail To: |