1. FCC ID
  2. QPB
  3. QPB-TR9000311

FCC ID QPB-TR9000311

TR-900 GSM/GPRS Module

by iWOW Connections Pte Ltd

Grantee Code: QPB   Product Code: TR9000311
Latest application date: 2011-07-05

FCC ID Device Details

FCC IDQPB-TR9000311
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQPB
Product CodeTR9000311
Applicant BusinessiWOW Connections Pte Ltd 🇸🇬
Related Domains iwow.com.sg
Equipment ClassTR-900 GSM/GPRS Module
Test FirmChina Telecommunication Technology Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2011-07-05

Exhibits

DocumentTypeAvailableFile
Revised Product ManualUsers Manual2011-07-05PDF 1.9 MB
Users ManualUsers Manual2011-07-05PDF 1.8 MB
Internal PhotosInternal Photos2011-07-05PDF 518.9 KB
External PhotosExternal Photos2011-07-05PDF 491.6 KB
FCC ID LabelID Label/Location Info2011-07-05PDF 64.4 KB
Test Setup PhotosTest Setup Photos2011-07-05PDF 37.8 KB
Revised Test ReportTest Report2011-07-05PDF 2.7 MB
Test ReportTest Report2011-07-05PDF 3 MB
Confidential Request LetterCover Letter(s)2011-07-05PDF 713.3 KB
Modular Approval LetterCover Letter(s)2011-07-05PDF 38.6 KB
RF Exposure InformationRF Exposure Info2011-07-05PDF 2.3 MB
Revised MPE ReportRF Exposure Info2011-07-05PDF 2.4 MB

Application Information

Application IDvHIbcmuJ7OP1ctyZnK6VMg==
Final Action Date2011-07-05
Application PurposeOriginal Equipment
Applicant FRN0005092879
Model-TR9000311
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionTR-900 GSM/GPRS Module
Responsible PartyLee Yao Chiang, CEO, yclee@iwow.com.sg , 65-7488123
Test FirmZou Dongyi, China Telecommunication Technology Labs, emc@chinattl.com , 86-10-68094053
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with radiated power and RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 7.1 dBi for cellular band and 6.5 dBi for PCS band. The total system output must not exceed 2.0 W EIRP in the PCS band in order to comply with the EIRP limit of 24.232(b). Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons and must not be co-located or operated in conjunction with any antenna or transmitter. Compliance of this device in all final product configurations is the responsibility of the Grantee. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Applications

Application IDDatePurpose
vHIbcmuJ7OP1ctyZnK6VMg==2011-07-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.9192.5ppm245KGXW22H
824.2-848.8 MHz1.0722.5ppm253KG7W22H
1850.2-1909.8 MHz0.8872.5ppm248KGXW24E
1850.2-1909.8 MHz0.8952.5ppm250KG7W24E

Grants

TCB Grant - Application vHIbcmuJ7OP1ctyZnK6VMg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 07/05/2011

Application Dated: 07/05/2011
iWOW Connections Pte Ltd
1 Lorong 2 Toa Payoh #04-01
Yellow Pages Building
Singapore, 319637
Singapore
 
Attention: Lee Yao Chiang , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPB-TR9000311
Name of Grantee:  iWOW Connections Pte Ltd
Equipment Class: PCS Licensed Transmitter
Notes: TR-900 GSM/GPRS Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.887 2.5  PM 248KGXW
22H 824.2  -  848.8 1.072 2.5  PM 253KG7W
24E 1850.2  -  1909.8 0.895 2.5  PM 250KG7W

Output power is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with radiated power and RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 7.1 dBi for cellular band and 6.5 dBi for PCS band. The total system output must not exceed 2.0 W EIRP in the PCS band in order to comply with the EIRP limit of 24.232(b). Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons and must not be co-located or operated in conjunction with any antenna or transmitter. Compliance of this device in all final product configurations is the responsibility of the Grantee. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application vHIbcmuJ7OP1ctyZnK6VMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

iWOW Connections Pte Ltd
1 Lorong 2 Toa Payoh #04-01 Yellow Pages Building
Singapore, 319637
Singapore 		  Date of Grant: 07/05/2011

Application Dated: 07/05/2011
 
Attention: Lee Yao Chiang , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPB-TR9000311
Name of Grantee:  iWOW Connections Pte Ltd
Equipment Class: PCS Licensed Transmitter
Notes: TR-900 GSM/GPRS Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.887 2.5  PM 248KGXW
22H 824.2  -  848.8 1.072 2.5  PM 253KG7W
24E 1850.2  -  1909.8 0.895 2.5  PM 250KG7W

Output power is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with radiated power and RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 7.1 dBi for cellular band and 6.5 dBi for PCS band. The total system output must not exceed 2.0 W EIRP in the PCS band in order to comply with the EIRP limit of 24.232(b). Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons and must not be co-located or operated in conjunction with any antenna or transmitter. Compliance of this device in all final product configurations is the responsibility of the Grantee. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: