FCC ID QPI-RFMODULE02
DTS
by Heat-Timer Corporation
Grantee Code: QPI Product Code: RFMODULE02
Latest application date: 2022-06-21
FCC ID Device Details
| FCC ID | QPI-RFMODULE02 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QPI |
| Product Code | RFMODULE02 |
| Applicant Business | Heat-Timer Corporation 🇺🇸 |
| Related Domains |  heat-timer.com |
| Equipment Class | DTS |
| Test Firm | Advanced Compliance Laboratory, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 918 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-21 |
| 918 MHz | Change in identification of presently authorized equipment. Original FCC ID: P9OLAMBDA62 Grant Date: 08/31/2020 | 2022-06-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Wireless SNR | Users Manual | 2022-06-21 | PDF 382.6 KB |
| Antenna Photo | Internal Photos | 2022-06-21 | PDF 941.8 KB |
| Internal Photos | Internal Photos | 2022-06-21 | PDF 953.7 KB |
| Modular Photos | Internal Photos | 2022-06-21 | PDF 333.9 KB |
| External Photos | External Photos | 2022-06-21 | PDF 300.5 KB |
| External Photos | External Photos | 2022-06-06 | PDF 83.7 KB |
| Labeling | ID Label/Location Info | 2022-06-21 | PDF 77.5 KB |
| Label | ID Label/Location Info | 2022-06-06 | PDF 204.4 KB |
| Setup Photos | Test Setup Photos | 2022-06-21 | PDF 2.3 MB |
| 247 Test Report | Test Report | 2022-06-21 | PDF 5 MB |
| HT Hyperlink Tech Ant Report | Test Report | 2022-06-21 | PDF 274.8 KB |
| C2PC Cover Letter | Cover Letter(s) | 2022-06-21 | PDF 71.2 KB |
| Confidentiality Request | Cover Letter(s) | 2022-06-21 | PDF 262 KB |
| POA Letter | Cover Letter(s) | 2022-06-21 | PDF 117.5 KB |
| New Applicant ML Request Letter | Cover Letter(s) | 2022-06-06 | PDF 125.3 KB |
| Original Applicant Permission Ltr | Cover Letter(s) | 2022-06-06 | PDF 178.3 KB |
| POA Letter | Cover Letter(s) | 2022-06-06 | PDF 126.3 KB |
| MPE Report | RF Exposure Info | 2022-06-21 | PDF 97.6 KB |
| Block Diagram Op Description Metadata only | Block Diagram | PDF 10.2 KB | |
| Schematics Metadata only | Schematics | PDF 44.3 KB | |
| ant-916-cw-hwr Metadata only | Operational Description | PDF 305.1 KB | |
| ant-916-jjb-tt Metadata only | Operational Description | PDF 344 KB | |
| ant-916-mhw-fff-x Metadata only | Operational Description | PDF 228.8 KB |
Application Information
| Application ID | t1/i6jWMU320uer7ANGCxw== |
|---|---|
| Final Action Date | 2022-06-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007546419 |
| Model | RFMODULE02 |
| Frequency Range | 918 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | DTS |
| Responsible Party | Carlos Urbina, Engineering Manager, Carlos.Urbina@heat-timer.com , 973-575-4004 |
| Test Firm | Wei Li, Advanced Compliance Laboratory, Inc., aclab@ac-lab.com  , 908-927-9288 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Authorizes integration into the Heat-Timer Corporation’s Wireless Heat Sensor with antenna systems as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t1/i6jWMU320uer7ANGCxw== | 2022-06-21 | Class II permissive change or modification of presently authorized equipment |
| k14i9ed7vUtEjfGDn32ARA== | 2022-06-06 | Change in identification of presently authorized equipment. Original FCC ID: P9OLAMBDA62 Grant Date: 08/31/2020 |
Grants
TCB Grant - Application t1/i6jWMU320uer7ANGCxw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/21/2022 Application Dated: 06/21/2022 |
| Heat-Timer Corporation |
| 20 New Dutch Lane |
| Fairfield, NJ 07004 |
| Attention: Carlos Urbina , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPI-RFMODULE02 |
| Name of Grantee: | Heat-Timer Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | DTS |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 918.0 - 918.0 | 0.045 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Authorizes integration into the Heat-Timer Corporation’s Wireless Heat Sensor with antenna systems as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application t1/i6jWMU320uer7ANGCxw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Heat-Timer Corporation 20 New Dutch Lane Fairfield, NJ 07004 United States |
Date of Grant: 06/21/2022 Application Dated: 06/21/2022 |
| Attention: Carlos Urbina , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPI-RFMODULE02 |
| Name of Grantee: | Heat-Timer Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | DTS |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 918.0 - 918.0 | 0.045 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Authorizes integration into the Heat-Timer Corporation’s Wireless Heat Sensor with antenna systems as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/06/2022 Application Dated: 06/06/2022 |
| Heat-Timer Corporation |
| 20 New Dutch Lane |
| Fairfield, NJ 07004 |
| Attention: Carlos Urbina , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPI-RFMODULE02 |
| Name of Grantee: | Heat-Timer Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | RFMODULE02 (900371-00) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 918.0 - 918.0 | 0.057 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application k14i9ed7vUtEjfGDn32ARA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Heat-Timer Corporation 20 New Dutch Lane Fairfield, NJ 07004 United States |
Date of Grant: 06/06/2022 Application Dated: 06/06/2022 |
| Attention: Carlos Urbina , Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPI-RFMODULE02 |
| Name of Grantee: | Heat-Timer Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | RFMODULE02 (900371-00) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 918.0 - 918.0 | 0.057 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |