FCC ID QPN-MOBIPRINT3
Connected mobile with Printer
by MobiWire SAS
Grantee Code: QPN Product Code: MOBIPRINT3
Latest application date: 2015-03-08
FCC ID Device Details
| FCC ID | QPN-MOBIPRINT3 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QPN |
| Product Code | MOBIPRINT3 |
| Applicant Business | MobiWire SAS 🇫🇷 |
| Related Domains |  mobiwire.com |
| Equipment Class | Connected mobile with Printer |
| Test Firm | East China Institute of Telecommunications |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2015-03-08 |
| 2402-2480 MHz | Original Equipment | 2015-03-08 |
| 824.2-848.8 MHz | Original Equipment | 2015-03-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| MP3 UM Content 20150209-ver1 | Users Manual | 2015-03-08 | PDF 385.5 KB |
| internal photo | Internal Photos | 2015-03-08 | PDF 2.1 MB |
| External photo | External Photos | 2015-03-08 | PDF 2.8 MB |
| IMEI Label | ID Label/Location Info | 2015-03-08 | PDF 55.7 KB |
| Label&location | ID Label/Location Info | 2015-03-08 | PDF 137.6 KB |
| Test Setup photo-SAR | Test Setup Photos | 2015-03-08 | PDF 138.1 KB |
| Test setup photo-EMC | Test Setup Photos | 2015-03-08 | PDF 1.1 MB |
| I14D00057-BLE | Test Report | 2015-03-08 | PDF 1.4 MB |
| I14D00057-EMC | Test Report | 2015-03-08 | PDF 684.3 KB |
| I14D00057-RFA-ver1 | Test Report | 2015-03-08 | PDF 1.2 MB |
| I14D00057-RFB | Test Report | 2015-03-08 | PDF 2.3 MB |
| I14D00057-WLA | Test Report | 2015-03-08 | PDF 3.7 MB |
| Confidentiality-ver1 | Cover Letter(s) | 2015-03-08 | PDF 75.7 KB |
| authority-ver1 | Cover Letter(s) | 2015-03-08 | PDF 36.4 KB |
| I14D00057-SAR-ver1 | RF Exposure Info | 2015-03-08 | PDF 3.4 MB |
| MP3 Block diagram 2G Metadata only | Block Diagram | PDF 270.9 KB | |
| MP3_MMI_V02.SCH.1 Metadata only | Schematics | PDF 2.5 MB | |
| MP3 Antenna Metadata only | Operational Description | PDF 146.4 KB | |
| mp3 operation description-ver2 Metadata only | Operational Description | PDF 250.4 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 107.8 KB | |
| BOM.pdf Metadata only | Parts List/Tune Up Info | PDF 107.8 KB | |
| Tune up procedure Metadata only | Parts List/Tune Up Info | PDF 19.9 KB |
Application Information
| Application ID | tSVm8hJ0vm/qCFg+K5Cjeg== |
|---|---|
| Final Action Date | 2015-03-08 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022120273 |
| Model | MOBIPRINT3 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Connected mobile with Printer |
| Responsible Party | Olivier TIENNAULT, Technical Director, olivier.tiennault@mobiwire.com , 0625028368 |
| Technical Contact | Tina Gong, East china institute of Telecommunications, tina@ecit.org.cn  , 86-21-63843300 |
| Test Firm | Jing Li, East China Institute of Telecommunications, lijing@ecit.org.cn , 862-163-8433 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This device can be used in mobile/portable configurations. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.71 W/kg, 0.71 W/kg and 1.57 W/kg, respectively. This device contains Bluetooth, BLE and GSM transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tSVm8hJ0vm/qCFg+K5Cjeg== | 2015-03-08 | Original Equipment |
| hUSmEiTsdfSjAn/i9rHbYg== | 2015-03-08 | Original Equipment |
| ZOIpgoXG1gQPI+dQpZ/6YA== | 2015-03-08 | Original Equipment |
| M1BHKX6fyyErtE2VSI8MEQ== | 2015-03-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZOIpgoXG1gQPI+dQpZ/6YA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| MobiWire SAS |
| 79 avenue Francois Arago, 92017 NANTERRE France |
| NANTERRE, France |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Connected mobile with Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power out is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains GSM and WLAN, BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZOIpgoXG1gQPI+dQpZ/6YA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MobiWire SAS 79 avenue Francois Arago, 92017 NANTERRE France NANTERRE, France |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Connected mobile with Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power out is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains GSM and WLAN, BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| MobiWire SAS |
| 79 avenue Francois Arago, 92017 NANTERRE France |
| NANTERRE, France |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | Connected mobile with Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0006 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.139 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This device can be used in mobile/portable configurations. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.71 W/kg, 0.71 W/kg and 1.57 W/kg, respectively. This device contains Bluetooth, BLE and GSM transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tSVm8hJ0vm/qCFg+K5Cjeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MobiWire SAS 79 avenue Francois Arago, 92017 NANTERRE France NANTERRE, France |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Digital Transmission System |
| Notes: | Connected mobile with Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0006 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.139 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This device can be used in mobile/portable configurations. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.71 W/kg, 0.71 W/kg and 1.57 W/kg, respectively. This device contains Bluetooth, BLE and GSM transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| MobiWire SAS |
| 79 avenue Francois Arago, 92017 NANTERRE France |
| NANTERRE, France |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Connected mobile with Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 0.757 | 0.1 PM | 300KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.267 | 0.1 PM | 300KGXW |
| Power Output is ERP for Part 22 and EIRP for Part 24. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR value for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.86 W/kg, 0.86 W/kg and 1.57 W/kg, respectively. This device contains GSM functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell and 1900 MHz PCS operations. This device contains Bluetooth, BLE and WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application M1BHKX6fyyErtE2VSI8MEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MobiWire SAS 79 avenue Francois Arago, 92017 NANTERRE France NANTERRE, France |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Connected mobile with Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 0.757 | 0.1 PM | 300KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.267 | 0.1 PM | 300KGXW |
| Power Output is ERP for Part 22 and EIRP for Part 24. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR value for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.86 W/kg, 0.86 W/kg and 1.57 W/kg, respectively. This device contains GSM functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell and 1900 MHz PCS operations. This device contains Bluetooth, BLE and WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| MobiWire SAS |
| 79 avenue Francois Arago, 92017 NANTERRE France |
| NANTERRE, France |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Connected mobile with Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains GSM, Bluetooth, BLE and WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hUSmEiTsdfSjAn/i9rHbYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MobiWire SAS 79 avenue Francois Arago, 92017 NANTERRE France NANTERRE, France |
Date of Grant: 03/08/2015 Application Dated: 02/15/2015 |
| Attention: Olivier TIENNAULT , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QPN-MOBIPRINT3 |
| Name of Grantee: | MobiWire SAS |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Connected mobile with Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains GSM, Bluetooth, BLE and WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |