FCC ID QPU8200

Wi-Fi Network Controller Module

by Murata Electronics North America

Grantee Code: QPU   Product Code: 8200
Latest application date: 2013-07-07

FCC ID Device Details

FCC IDQPU8200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQPU
Product Code8200
Applicant BusinessMurata Electronics North America 🇺🇸
Related Domains murata.com
Equipment ClassWi-Fi Network Controller Module
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-07-07
2412-2462 MHzOriginal Equipment2012-03-27

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2012-03-27PDF 1.2 MB
internal photosInternal Photos2012-03-27PDF 544 KB
external photosExternal Photos2012-03-27PDF 544 KB
label and locationID Label/Location Info2012-03-27PDF 49.9 KB
Test Setup PhotosTest Setup Photos2013-07-07PDF 459 KB
test setup photosTest Setup Photos2012-03-27PDF 981.7 KB
Test ReportTest Report2013-07-07PDF 4.7 MB
test reportTest Report2012-03-27PDF 623.7 KB
CIIPC LetterCover Letter(s)2013-07-07PDF 226.8 KB
agent letterCover Letter(s)2012-03-27PDF 33.3 KB
confidential letterCover Letter(s)2012-03-27PDF 22.8 KB
model differences letterCover Letter(s)2012-03-27PDF 31 KB
modular letterCover Letter(s)2012-03-27PDF 59 KB
Antenna DatasheetRF Exposure Info2013-07-07PDF 64.6 KB
MPERF Exposure Info2013-07-07PDF 72.7 KB
MPE calculationRF Exposure Info2012-03-27PDF 19 KB

Application Information

Application IDLH0gY5ft4n2wte1uYZ28dg==
Final Action Date2013-07-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024753089
Model8200
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWi-Fi Network Controller Module
Responsible PartyMark Tucker, Manager, Hardware Engineering Group, mtucker@murata.com , 678-684-2009
Technical ContactMichael Feng, RFM, hfeng@murata.com , 972-202-8880
Non-Technical ContactJeffrey Gregus, RFM, jgregus@murata.com , 972-202-8846
Test FirmAsad Bajwa, MET Laboratories, Inc., abajwa@metlabs.com , 510-214-4427
TCB Emailtcbinfo@metlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to add 5dBi antenna Power is listed as conducted.

Applications

Application IDDatePurpose
LH0gY5ft4n2wte1uYZ28dg==2013-07-07Class II permissive change or modification of presently authorized equipment
nYY/iSWMQu+k9TZysOVtHg==2012-03-27Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.162000015C
2412-2462 MHz0.173000015C

Grants

TCB Grant - Application nYY/iSWMQu+k9TZysOVtHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 03/27/2012

Application Dated: 03/27/2012
Murata Electronics North America
2200 Lake Park Drive
Smyrna, GA 30080-7604
 
Attention: Mark Tucker , Manager, Hardware Engineering Group

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPU8200
Name of Grantee:  Murata Electronics North America
Equipment Class: Digital Transmission System
Notes: Wi-Fi Network Controller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.173  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application nYY/iSWMQu+k9TZysOVtHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Electronics North America
2200 Lake Park Drive
Smyrna, GA 30080-7604
United States
  Date of Grant: 03/27/2012

Application Dated: 03/27/2012
 
Attention: Mark Tucker , Manager, Hardware Engineering Group

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPU8200
Name of Grantee:  Murata Electronics North America
Equipment Class: Digital Transmission System
Notes: Wi-Fi Network Controller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.173  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application LH0gY5ft4n2wte1uYZ28dg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 07/07/2013

Application Dated: 07/07/2013
Murata Electronics North America
2200 Lake Park Drive
Smyrna, GA 30080-7604
 
Attention: Mark Tucker , Manager, Hardware Engineering Group

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPU8200
Name of Grantee:  Murata Electronics North America
Equipment Class: Digital Transmission System
Notes: Wi-Fi Network Controller Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.162  

Class II permissive change to add 5dBi antenna Power is listed as conducted.

EAS Grant - Application LH0gY5ft4n2wte1uYZ28dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Electronics North America
2200 Lake Park Drive
Smyrna, GA 30080-7604
United States
  Date of Grant: 07/07/2013

Application Dated: 07/07/2013
 
Attention: Mark Tucker , Manager, Hardware Engineering Group

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QPU8200
Name of Grantee:  Murata Electronics North America
Equipment Class: Digital Transmission System
Notes: Wi-Fi Network Controller Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.162  

Class II permissive change to add 5dBi antenna Power is listed as conducted.



Mail To: