FCC ID QQN16363
Transmitter Module
by Control Microsystems Inc.operating as Schneider Eletric.
Grantee Code: QQN Product Code: 16363
Latest application date: 2005-09-30
FCC ID Device Details
| FCC ID | QQN16363 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QQN |
| Product Code | 16363 |
| Applicant Business | Control Microsystems Inc.operating as Schneider Eletric. 🇨🇦 |
| Related Domains |  controlmicrosystems.com |
| Equipment Class | Transmitter Module |
| Test Firm | BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2005-09-30 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2004-06-18 |
| 902-928 MHz | Original Equipment | 2003-02-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2005-09-30 | PDF 718.3 KB |
| Manual | Users Manual | 2004-06-18 | PDF 245.4 KB |
| Users Manual | Users Manual | 2003-02-04 | PDF 331.7 KB |
| Internal Photos | Internal Photos | 2003-02-04 | PDF 489.2 KB |
| External Photo | External Photos | 2005-09-30 | PDF 782.2 KB |
| External Photos | External Photos | 2003-02-04 | PDF 489.2 KB |
| Label Exhibit | ID Label/Location Info | 2003-02-04 | PDF 299.6 KB |
| Fiberglass Omni antenna | Operational Description | 2004-06-18 | PDF 125.7 KB |
| Yagi antenna | Operational Description | 2004-06-18 | PDF 101.6 KB |
| Test Setup Photos | Test Setup Photos | 2004-06-18 | PDF 317.4 KB |
| Test Setup Photos | Test Setup Photos | 2003-02-04 | PDF 223.9 KB |
| Technical Report | Test Report | 2004-06-18 | PDF 188.7 KB |
| Test Report | Test Report | 2003-02-04 | PDF 650.7 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2005-09-30 | PDF 28.9 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2005-09-30 | PDF 56.4 KB |
| Note to FCC | Cover Letter(s) | 2005-09-30 | PDF 70.2 KB |
| Response to Inquiry to FCC | Cover Letter(s) | 2005-09-30 | PDF 106.1 KB |
| Class II PC Cover Letter | Cover Letter(s) | 2004-06-18 | PDF 48.4 KB |
| Confidentiality Request | Cover Letter(s) | 2003-02-04 | PDF 126.5 KB |
| Response to TCB Findings | Cover Letter(s) | 2003-02-04 | PDF 78.4 KB |
| RF Exposure Information | RF Exposure Info | 2004-06-18 | PDF 20.4 KB |
| RF Exposure | RF Exposure Info | 2003-02-04 | PDF 5.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 8.6 KB | |
| Schematics Metadata only | Schematics | PDF 162.1 KB | |
| Functional Description Metadata only | Operational Description | PDF 17.7 KB |
Application Information
| Application ID | +ekLW8lSuzghjluxwrUREw== |
|---|---|
| Final Action Date | 2005-09-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007941438 |
| Model | 16363 |
| Frequency Range | 902-928 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Transmitter Module |
| Responsible Party | Michael Gafanovitch Gafanovitch, Quality Manager, mgafanovitch@controlmicrosystems.com , 613-591-3838 |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com  , 978 486 8880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change performed to change limited modular approval to modular approval. Only the antennas listed in previous filings, when installed in accordance with the instructions in this application, can be used with this module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| +ekLW8lSuzghjluxwrUREw== | 2005-09-30 | Class II permissive change or modification of presently authorized equipment |
| YjxndXO6EEH7jWQEzUYxDw== | 2004-06-18 | Class II permissive change or modification of presently authorized equipment |
| B0ZJ0nKgRrzmU6V2qS5DDw== | 2003-02-04 | Original Equipment |
Grants
TCB Grant - Application YjxndXO6EEH7jWQEzUYxDw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Control Microsystems Inc.operating as Schneider Eletric. |
| 48 Steacie Drive |
| Kanata, K2K 2A9 Canada |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.02 |
| Class II Permissive Change performed to add new antennas. Only the antennas listed in this filing and in the original filing can be used with this module. Limited modular approval. This module is for use only within Adaptive Instrument devices when installed in accordance with the documents on file. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application YjxndXO6EEH7jWQEzUYxDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Control Microsystems Inc.operating as Schneider Eletric. 48 Steacie Drive Kanata, K2K 2A9 Canada |
Date of Grant: 06/18/2004 Application Dated: 06/18/2004 |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.02 |
| Class II Permissive Change performed to add new antennas. Only the antennas listed in this filing and in the original filing can be used with this module. Limited modular approval. This module is for use only within Adaptive Instrument devices when installed in accordance with the documents on file. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/04/2003 Application Dated: 02/04/2003 |
| Control Microsystems Inc.operating as Schneider Eletric. |
| 48 Steacie Drive |
| Kanata, K2K 2A9 Canada |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.02 |
| Grant Conditions – The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Limited modular approval - this module is for use only within Adaptive Instrument devices and installed in accordance with the documents on file. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application B0ZJ0nKgRrzmU6V2qS5DDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Control Microsystems Inc.operating as Schneider Eletric. 48 Steacie Drive Kanata, K2K 2A9 Canada |
Date of Grant: 02/04/2003 Application Dated: 02/04/2003 |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.0 - 928.0 | 0.02 |
| Grant Conditions – The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Limited modular approval - this module is for use only within Adaptive Instrument devices and installed in accordance with the documents on file. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/30/2005 Application Dated: 09/30/2005 |
| Control Microsystems Inc.operating as Schneider Eletric. |
| 48 Steacie Drive |
| Kanata, K2K 2A9 Canada |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 18 | 15C | 902.0 - 928.0 | 0.02 | ||
| 18 | 15C | 902.0 - 928.0 | 0.02 |
| Class II Permissive Change performed to change limited modular approval to modular approval. Only the antennas listed in previous filings, when installed in accordance with the instructions in this application, can be used with this module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 18: | This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance. |
EAS Grant - Application +ekLW8lSuzghjluxwrUREw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Control Microsystems Inc.operating as Schneider Eletric. 48 Steacie Drive Kanata, K2K 2A9 Canada |
Date of Grant: 09/30/2005 Application Dated: 09/30/2005 |
| Attention: Michael Gafanovitch Gafanovitch , Quality Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QQN16363 |
| Name of Grantee: | Control Microsystems Inc.operating as Schneider Eletric. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Transmitter Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 18 | 15C | 902.0 - 928.0 | 0.02 | ||
| 18 | 15C | 902.0 - 928.0 | 0.02 |
| Class II Permissive Change performed to change limited modular approval to modular approval. Only the antennas listed in previous filings, when installed in accordance with the instructions in this application, can be used with this module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 18: | This device must be supplied with a shielded A.C. power cord if one is required to ensure compliance. |
| Mail To: |