FCC ID QSS-2LMX9838
Bluetooth Serial Port Module
by Skidata AG
Grantee Code: QSS Product Code: 2LMX9838
Latest application date: 2010-08-27
FCC ID Device Details
| FCC ID | QSS-2LMX9838 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QSS |
| Product Code | 2LMX9838 |
| Applicant Business | Skidata AG 🇦🇹 |
| Related Domains |  skidata.com |
| Equipment Class | Bluetooth Serial Port Module |
| Test Firm | TUV SUD Product Service GmbH PS-EMC-STR |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-08-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: ED9LMX9838 Grant Date: 02/08/2007 | 2010-08-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2010-08-10 | PDF 341.7 KB |
| Id Label | ID Label/Location Info | 2010-08-27 | PDF 131.6 KB |
| Label Info | ID Label/Location Info | 2010-08-10 | PDF 79.7 KB |
| test setup photos | Test Setup Photos | 2010-08-27 | PDF 1.1 MB |
| Annex to Test Report | Test Report | 2010-08-27 | PDF 7 KB |
| AnnexI to Test Report | Test Report | 2010-08-27 | PDF 13.9 KB |
| test report | Test Report | 2010-08-27 | PDF 1.1 MB |
| authorization letter | Cover Letter(s) | 2010-08-27 | PDF 54.4 KB |
| cover letter | Cover Letter(s) | 2010-08-27 | PDF 30.7 KB |
| Authorization Letter | Cover Letter(s) | 2010-08-10 | PDF 14.5 KB |
| Change in ID letter | Cover Letter(s) | 2010-08-10 | PDF 216.6 KB |
Application Information
| Application ID | LyiwebHWyq/KUeyaN8AeAw== |
|---|---|
| Final Action Date | 2010-08-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006750459 |
| Model | -2LMX9838 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Serial Port Module |
| Responsible Party | Christoph Sonderegger, Ing. Mag., christoph.sonderegger@skidata.com , +43 6246 888 |
| Agent | Johann Johann Johann, TUEV SUED Senton GMBH, senton@tuev-sued.de  , +49-9421-552213 |
| Test Firm | Rainer Heller, TUV SUD Product Service GmbH PS-EMC-STR, rainer.heller@tuev-sued.de , 49-09421-5522-20 |
| TCB Email | Dollitz.uwe@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add co-location of RFID Reader as documented in the filing. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| LyiwebHWyq/KUeyaN8AeAw== | 2010-08-27 | Class II permissive change or modification of presently authorized equipment |
| f1c+p4LDIzIF5IgpRar4Nw== | 2010-08-10 | Change in identification of presently authorized equipment. Original FCC ID: ED9LMX9838 Grant Date: 02/08/2007 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0016300 | 15C |
Grants
TCB Grant - Application LyiwebHWyq/KUeyaN8AeAw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/27/2010 Application Dated: 08/27/2010 |
| Skidata AG |
| Untersbergstrasse 40 |
| Grödig, 5083 Austria |
| Attention: Christoph Sonderegger , Ing. Mag. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QSS-2LMX9838 |
| Name of Grantee: | Skidata AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Serial Port Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00163 |
| Class II Permissive Change to add co-location of RFID Reader as documented in the filing. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application LyiwebHWyq/KUeyaN8AeAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skidata AG Untersbergstrasse 40 Grödig, 5083 Austria |
Date of Grant: 08/27/2010 Application Dated: 08/27/2010 |
| Attention: Christoph Sonderegger , Ing. Mag. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QSS-2LMX9838 |
| Name of Grantee: | Skidata AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Serial Port Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00163 |
| Class II Permissive Change to add co-location of RFID Reader as documented in the filing. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/10/2010 Application Dated: 08/10/2010 |
| Skidata AG |
| Untersbergstrasse 40 |
| Grödig, 5083 Austria |
| Attention: Christoph Sonderegger , Ing. Mag. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QSS-2LMX9838 |
| Name of Grantee: | Skidata AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Serial Port Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00163 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
EAS Grant - Application f1c+p4LDIzIF5IgpRar4Nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skidata AG Untersbergstrasse 40 Grödig, 5083 Austria |
Date of Grant: 08/10/2010 Application Dated: 08/10/2010 |
| Attention: Christoph Sonderegger , Ing. Mag. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QSS-2LMX9838 |
| Name of Grantee: | Skidata AG |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Serial Port Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00163 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |