FCC ID QTZAM1200ABG

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Airespace

110 Nortech Parkway

San Jose, CA 95134

Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QTZAM1200ABG
Name of Grantee:	Airespace
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 Dual Band Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15E	5180.0  -  5240.0	0.029
CC CE	15E	5260.0  -  5320.0	0.055
CC CE	15E	5745.0  -  5805.0	0.089

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing. The maximum net effective gain of any external 5 GHz antenna is 7.4 dBi. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed only by the grantee such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Subcontracting the professional installation of any external antennas for use in the 5.15 - 5.25 GHz band that ship from the factory without permanent connections is prohibited. Installation of external 5 GHz antennas that are not performed by the grantee or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation by the grantee or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Airespace 110 Nortech Parkway San Jose, CA 95134 United States

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QTZAM1200ABG
Name of Grantee:	Airespace
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 Dual Band Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15E	5180.0  -  5240.0	0.029
CC CE	15E	5260.0  -  5320.0	0.055
CC CE	15E	5745.0  -  5805.0	0.089

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing. The maximum net effective gain of any external 5 GHz antenna is 7.4 dBi. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed only by the grantee such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Subcontracting the professional installation of any external antennas for use in the 5.15 - 5.25 GHz band that ship from the factory without permanent connections is prohibited. Installation of external 5 GHz antennas that are not performed by the grantee or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation by the grantee or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application H7OgSBdhpccTXa0lM8B9OQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Airespace

110 Nortech Parkway

San Jose, CA 95134

Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QTZAM1200ABG
Name of Grantee:	Airespace
Equipment Class:	Digital Transmission System
Notes:	802.11 Dual Band Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15C	2412.0  -  2462.0	0.123

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed only by the grantee such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Subcontracting the professional installation of any external antennas for use in the 5.15 - 5.25 GHz band that ship from the factory without permanent connections is prohibited. Installation of external 5 GHz antennas that are not performed by the grantee or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation by the grantee or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Airespace 110 Nortech Parkway San Jose, CA 95134 United States

Date of Grant: 01/13/2004 Application Dated: 01/13/2004

Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	QTZAM1200ABG
Name of Grantee:	Airespace
Equipment Class:	Digital Transmission System
Notes:	802.11 Dual Band Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC CE	15C	2412.0  -  2462.0	0.123

Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing. In order to comply with the integral antenna requirement 15.407(d), any external antennas for use in the 5.15 - 5.25 GHz UNII band must be for indoor use only and must be either professionally installed only by the grantee such that all connections are made permanent at the time of installation or ship from the factory with permanent connections. Subcontracting the professional installation of any external antennas for use in the 5.15 - 5.25 GHz band that ship from the factory without permanent connections is prohibited. Installation of external 5 GHz antennas that are not performed by the grantee or that are not considered to contain permanent connections must not allow the external antennas to operate in the 5.15 - 5.25 GHz UNII Band. End users must only be able to select the use of the 5.15-5.25 GHz band for external antennas for installations that utilize permanent connections due to professional installation by the grantee or permanent connection which were made at the factory. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter other than those contained in this device. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: