FCC ID QTZAMAP1200AB

802.11 Dual Band Access Point

by Airespace

Grantee Code: QTZ   Product Code: AMAP1200AB
Latest application date: 2003-11-05

FCC ID Device Details

FCC IDQTZAMAP1200AB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQTZ
Product CodeAMAP1200AB
Applicant BusinessAirespace 🇺🇸
Related Domains airespace.com
Equipment Class802.11 Dual Band Access Point
Test FirmElliott Laboratories LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2003-11-05
5180-5320 MHzOriginal Equipment2003-11-05

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2003-11-05PDF 3.2 MB
Internal Photos RevisedInternal Photos2003-11-05PDF 1.9 MB
External PhotosExternal Photos2003-11-05PDF 347.2 KB
ID Label Info RevisedID Label/Location Info2003-11-05PDF 208.9 KB
Operational DescriptionOperational Description2003-11-05PDF 233.6 KB
Test PhotosTest Setup Photos2003-11-05PDF 281.6 KB
DTS Test Report Metadata onlyTest Report2003-11-05PDF 429 KB
Dual TX DataTest Report2003-11-05PDF 369.1 KB
Dual Transmit DataTest Report2003-11-05PDF 369.1 KB
Test Report RevisedTest Report2003-11-05PDF 562.7 KB
Test Report Revised 110903Test Report2003-11-05PDF 374 KB
15 407 CDEG AttestationCover Letter(s)2003-11-05PDF 114.5 KB
802 11 G AttestationAttestation Statements2003-11-05PDF 29.2 KB
15 407 CDEG JustificationsCover Letter(s)2003-11-05PDF 114.5 KB
Additional Confidentiality Request for Deployment GuideCover Letter(s)2003-11-05PDF 92.1 KB
Additional Letter for Confidentiality on Deployment GuideCover Letter(s)2003-11-05PDF 92.1 KB
AuthorizationCover Letter(s)2003-11-05PDF 90.4 KB
Authorization LetterCover Letter(s)2003-11-05PDF 90.4 KB
Class A JustificationCover Letter(s)2003-11-05PDF 66.2 KB
CommentsCover Letter(s)2003-11-05PDF 20.2 KB
Confidentiality LetterCover Letter(s)2003-11-05PDF 91 KB
Confidentiality RequestCover Letter(s)2003-11-05PDF 91 KB
ResponseCover Letter(s)2003-11-05PDF 109.2 KB
RF Exposure RevisedRF Exposure Info2003-11-05PDF 156.8 KB
Deployment Guide Metadata onlyUsers ManualPDF 312.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 123.6 KB
Schematics Metadata onlySchematicsPDF 592.7 KB
Parts List Revised Metadata onlyParts List/Tune Up InfoPDF 50.8 KB

Application Information

Application IDQDu8dwE32Mmg2PsJwm3l9A==
Final Action Date2003-11-05
Application PurposeOriginal Equipment
Applicant FRN0008244642
ModelAMAP1200AB
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 Dual Band Access Point
Responsible PartyBob Friday, Sr. Scientist, bfriday@airespace.com , 408-941-0500
AgentDavid David David, Consultant, david@waitt.us , 408-832-7053
Technical ContactDavid Waitt, Consultant, david@waitt.us , 408-832-7053
Non-Technical ContactDavid Waitt, Consultant, 408-832-7053
Test FirmDavid Bare, Elliott Laboratories LLC, dbare@elliottlabs.com , 408-245-7800
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing and internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
QDu8dwE32Mmg2PsJwm3l9A==2003-11-05Original Equipment
0hTn9zt+FZoHi2d+RMJhIQ==2003-11-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.039000015CCC, CE
5180-5320 MHz0.04815ECC, CE
5745-5805 MHz0.07215ECC, CE

Grants

TCB Grant - Application QDu8dwE32Mmg2PsJwm3l9A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2003

Application Dated: 11/05/2003
Airespace
110 Nortech Parkway
San Jose, CA 95134
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZAMAP1200AB
Name of Grantee:  Airespace
Equipment Class: Digital Transmission System
Notes: 802.11 Dual Band Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.039  

Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing and internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application QDu8dwE32Mmg2PsJwm3l9A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airespace
110 Nortech Parkway
San Jose, CA 95134
United States
  Date of Grant: 11/05/2003

Application Dated: 11/05/2003
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZAMAP1200AB
Name of Grantee:  Airespace
Equipment Class: Digital Transmission System
Notes: 802.11 Dual Band Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.039  

Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing and internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 0hTn9zt+FZoHi2d+RMJhIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2003

Application Dated: 11/05/2003
Airespace
110 Nortech Parkway
San Jose, CA 95134
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZAMAP1200AB
Name of Grantee:  Airespace
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 Dual Band Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.048  
CC CE 15E 5745.0  -  5805.0 0.072  

Power output listed is conducted. The maximum output power on certain channels adjacent to band edges must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing and internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 0hTn9zt+FZoHi2d+RMJhIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airespace
110 Nortech Parkway
San Jose, CA 95134
United States
  Date of Grant: 11/05/2003

Application Dated: 11/05/2003
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZAMAP1200AB
Name of Grantee:  Airespace
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 Dual Band Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.048  
CC CE 15E 5745.0  -  5805.0 0.072  

Power output listed is conducted. The maximum output power on certain channels adjacent to band edges must be reduced as specified within this application. This Access Point is authorized for use only with the MINI PCI card specified in the filing and internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: