FCC ID QTZVAP1200
802.11 Dual Band Access Point
by Airespace
Grantee Code: QTZ Product Code: VAP1200
Latest application date: 2003-04-04
FCC ID Device Details
| FCC ID | QTZVAP1200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QTZ |
| Product Code | VAP1200 |
| Applicant Business | Airespace 🇺🇸 |
| Related Domains |  airespace.com  waitt.us |
| Equipment Class | 802.11 Dual Band Access Point |
| Test Firm | Elliott Laboratories LLC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-04-04 |
| 2412-2462 MHz | Original Equipment | 2003-03-10 |
| 5180-5240 MHz | Original Equipment | 2003-03-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual Revised | Users Manual | 2003-03-10 | PDF 130.6 KB |
| Internal Photos | Internal Photos | 2003-03-10 | PDF 1.2 MB |
| External Photos of Antennas | External Photos | 2003-04-04 | PDF 677.8 KB |
| External Photos | External Photos | 2003-03-10 | PDF 349.7 KB |
| Label Info | ID Label/Location Info | 2003-03-10 | PDF 172.3 KB |
| Information on Antenna 1 | Operational Description | 2003-04-04 | PDF 103.2 KB |
| Information on Antenna 2 | Operational Description | 2003-04-04 | PDF 158.6 KB |
| Operational Description | Operational Description | 2003-03-10 | PDF 179.1 KB |
| UNII 15407 Compliance information | Operational Description | 2003-03-10 | PDF 111.2 KB |
| UNII 15407 Statments | Operational Description | 2003-03-10 | PDF 111.2 KB |
| ISM Test Photos | Test Setup Photos | 2003-03-10 | PDF 383.7 KB |
| UNII Photos | Test Setup Photos | 2003-03-10 | PDF 513.2 KB |
| UNII Test Photos | Test Setup Photos | 2003-03-10 | PDF 513.2 KB |
| Test Report | Test Report | 2003-04-04 | PDF 209.4 KB |
| 15247 Report | Test Report | 2003-03-10 | PDF 546.6 KB |
| 15247 Test Report | Test Report | 2003-03-10 | PDF 546.6 KB |
| UNII Report | Test Report | 2003-03-10 | PDF 546.4 KB |
| UNII Test Report | Test Report | 2003-03-10 | PDF 546.4 KB |
| Attestation for Reduction in Power etc | Cover Letter(s) | 2003-03-10 | PDF 34.3 KB |
| Attestation regarding reduction of power etc | Cover Letter(s) | 2003-03-10 | PDF 34.3 KB |
| Additional info for Question 4 | Cover Letter(s) | 2003-04-04 | PDF 211.7 KB |
| Comments | Cover Letter(s) | 2003-04-04 | PDF 39.5 KB |
| Copy o fOriginal UNII Grant | Cover Letter(s) | 2003-04-04 | PDF 131.5 KB |
| Copy of Original DTS Grant | Cover Letter(s) | 2003-04-04 | PDF 130.1 KB |
| Permissive Change Letter | Cover Letter(s) | 2003-04-04 | PDF 92.5 KB |
| Response | Cover Letter(s) | 2003-04-04 | PDF 181.1 KB |
| Authorization Letter | Cover Letter(s) | 2003-03-10 | PDF 29.5 KB |
| Comments 1 | Cover Letter(s) | 2003-03-10 | PDF 54.1 KB |
| Comments 2 | Cover Letter(s) | 2003-03-10 | PDF 56.6 KB |
| Comments 3 | Cover Letter(s) | 2003-03-10 | PDF 55.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2003-03-10 | PDF 88.2 KB |
| Confidentiality Request | Cover Letter(s) | 2003-03-10 | PDF 88.2 KB |
| Response 1 | Cover Letter(s) | 2003-03-10 | PDF 97.5 KB |
| Response 2 | Cover Letter(s) | 2003-03-10 | PDF 397 KB |
| Response 3 | Cover Letter(s) | 2003-03-10 | PDF 105.7 KB |
| RF Exposure Info | RF Exposure Info | 2003-04-04 | PDF 167.3 KB |
| RF Exposure Info | RF Exposure Info | 2003-03-10 | PDF 169 KB |
| Block Diagram Metadata only | Block Diagram | PDF 123.6 KB | |
| Schematics Metadata only | Schematics | PDF 621.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 41.4 KB |
Application Information
| Application ID | WhCqFyzhAaqJ6rRe5LDwhQ== |
|---|---|
| Final Action Date | 2003-04-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008244642 |
| Model | VAP1200 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 Dual Band Access Point |
| Responsible Party | Bob Friday, Sr. Scientist, bfriday@airespace.com , 408-941-0500 |
| Agent | David David David, Consultant, david@waitt.us , 408-832-7053 |
| Technical Contact | David Waitt, Consultant, david@waitt.us , 408-832-7053 |
| Non-Technical Contact | David Waitt, Consultant, david@waitt.us , 408-832-7053 |
| Test Firm | David Bare, Elliott Laboratories LLC, dbare@elliottlabs.com  , 408-245-7800 |
| TCB Email | hotline@AmericanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This Permissive Change filing has added 2 antennas operating in the 2.4 GHz band in mobile transmitting device configurations. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WhCqFyzhAaqJ6rRe5LDwhQ== | 2003-04-04 | Class II permissive change or modification of presently authorized equipment |
| YEFYXPKspyL4k6WFkbYR0Q== | 2003-03-10 | Original Equipment |
| 2DkFH/nJRjJB1+wkF0otow== | 2003-03-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YEFYXPKspyL4k6WFkbYR0Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2003 Application Dated: 03/10/2003 |
| Airespace |
| 110 Nortech Parkway |
| San Jose, CA 95134 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15C | 2412.0 - 2462.0 | 0.034 |
| Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. This device is authorized for use with internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application YEFYXPKspyL4k6WFkbYR0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airespace 110 Nortech Parkway San Jose, CA 95134 United States |
Date of Grant: 03/10/2003 Application Dated: 03/10/2003 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15C | 2412.0 - 2462.0 | 0.034 |
| Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. This device is authorized for use with internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2003 Application Dated: 04/04/2003 |
| Airespace |
| 110 Nortech Parkway |
| San Jose, CA 95134 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.034 |
| Power output listed is conducted. This Permissive Change filing has added 2 antennas operating in the 2.4 GHz band in mobile transmitting device configurations. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application WhCqFyzhAaqJ6rRe5LDwhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airespace 110 Nortech Parkway San Jose, CA 95134 United States |
Date of Grant: 04/04/2003 Application Dated: 04/04/2003 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.034 |
| Power output listed is conducted. This Permissive Change filing has added 2 antennas operating in the 2.4 GHz band in mobile transmitting device configurations. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2003 Application Dated: 03/10/2003 |
| Airespace |
| 110 Nortech Parkway |
| San Jose, CA 95134 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15E | 5180.0 - 5240.0 | 0.026 | ||
| CC CE | 15E | 5260.0 - 5320.0 | 0.063 | ||
| CC CE | 15E | 5745.0 - 5805.0 | 0.066 |
| Power output listed is conducted. The maximum output power on a channel adjacent to 5180, 5320, & 5805 MHZ band edges must be reduced as specified within this application. This device is authorized for use with internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application 2DkFH/nJRjJB1+wkF0otow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Airespace 110 Nortech Parkway San Jose, CA 95134 United States |
Date of Grant: 03/10/2003 Application Dated: 03/10/2003 |
| Attention: Bob Friday , Sr. Scientist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QTZVAP1200 |
| Name of Grantee: | Airespace |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC CE | 15E | 5180.0 - 5240.0 | 0.026 | ||
| CC CE | 15E | 5260.0 - 5320.0 | 0.063 | ||
| CC CE | 15E | 5745.0 - 5805.0 | 0.066 |
| Power output listed is conducted. The maximum output power on a channel adjacent to 5180, 5320, & 5805 MHZ band edges must be reduced as specified within this application. This device is authorized for use with internal antennas only. The use of external antenna(s) requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement, any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |