FCC ID QTZWNAP1200AB

802.11 Dual Band Access Point

by Airespace

Grantee Code: QTZ   Product Code: WNAP1200AB
Latest application date: 2003-05-09

FCC ID Device Details

FCC IDQTZWNAP1200AB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQTZ
Product CodeWNAP1200AB
Applicant BusinessAirespace 🇺🇸
Related Domains airespace.com waitt.us
Equipment Class802.11 Dual Band Access Point
Test FirmElliott Laboratories LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2003-05-09
2412-2462 MHzOriginal Equipment2003-05-09

Exhibits

DocumentTypeAvailableFile
Revised Users ManualUsers Manual2003-05-09PDF 547.5 KB
Users ManualUsers Manual2003-05-09PDF 547.5 KB
Internal PhotosInternal Photos2003-05-09PDF 1.4 MB
Additional External PhotosExternal Photos2003-05-09PDF 805.5 KB
External PhotosExternal Photos2003-05-09PDF 385.5 KB
Revised LabelingID Label/Location Info2003-05-09PDF 171.7 KB
Revised Labeling InfoID Label/Location Info2003-05-09PDF 171.7 KB
Operational DescriptionOperational Description2003-05-09PDF 653.7 KB
Conducted Test PhotosTest Setup Photos2003-05-09PDF 76.4 KB
External Antenna Test PhotosTest Setup Photos2003-05-09PDF 313.8 KB
Internal Antenna Test PhotosTest Setup Photos2003-05-09PDF 327 KB
Letter Regarding UpgradesTest Setup Photos2003-05-09PDF 111.1 KB
Test Photos Internal AntennasTest Setup Photos2003-05-09PDF 327 KB
Test Photos external antennasTest Setup Photos2003-05-09PDF 313.8 KB
15 247 External Antennas Test ReportTest Report2003-05-09PDF 250.8 KB
15 247 Internal Antennas Test ReportTest Report2003-05-09PDF 355 KB
Revised Test Report 15 247 Internal AntennasTest Report2003-05-09PDF 355 KB
Revised UNII ReportTest Report2003-05-09PDF 550.1 KB
Test Report 15 247 External AntennasTest Report2003-05-09PDF 250.8 KB
UNII Test ReportTest Report2003-05-09PDF 550.1 KB
Auth LetterCover Letter(s)2003-05-09PDF 87.5 KB
Authorization LetterCover Letter(s)2003-05-09PDF 87.5 KB
Class A JustificationCover Letter(s)2003-05-09PDF 67.2 KB
Compliance with 15 407Cover Letter(s)2003-05-09PDF 24.8 KB
Confidentiality LetterCover Letter(s)2003-05-09PDF 91.4 KB
Letter Regarding Upgrading to 802 11 AB RadioCover Letter(s)2003-05-09PDF 111.1 KB
ResponseCover Letter(s)2003-05-09PDF 84.5 KB
RF Exposure External AntennasRF Exposure Info2003-05-09PDF 166.7 KB
RF Exposure Internal AntennasRF Exposure Info2003-05-09PDF 167.6 KB
RF Exposure using External AntennasRF Exposure Info2003-05-09PDF 166.7 KB
RF Exposure using Internal AntennasRF Exposure Info2003-05-09PDF 167.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 621.7 KB
Schematics Metadata onlySchematicsPDF 592.7 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 4.5 KB

Application Information

Application IDxCng+7iPDbKpTwGsUfLIFg==
Final Action Date2003-05-09
Application PurposeOriginal Equipment
Applicant FRN0008244642
ModelWNAP1200AB
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11 Dual Band Access Point
Responsible PartyBob Friday, Sr. Scientist, bfriday@airespace.com , 408-941-0500
AgentDavid David David, Consultant, david@waitt.us , 408 832 7053
Technical ContactDavid Waitt, Consultant, david@waitt.us , 408 832 7053
Non-Technical ContactDavid Waitt, Consultant, david@waitt.us , 408 832 7053
Test FirmDavid Bare, Elliott Laboratories LLC, dbare@elliottlabs.com , 408-245-7800
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The maximum output power on a channel adjacent to 5180, 5320, & 5805 MHZ band edges must be reduced as specified within this application. The use of external antenna(s) for the 5 GHz band requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement 15.407(d), any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those that are part of this device. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
xCng+7iPDbKpTwGsUfLIFg==2003-05-09Original Equipment
idpyDDh9adgrjguu+EJRsA==2003-05-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.035000015CCC, CE
5180-5240 MHz0.0515ECC, CE
5260-5320 MHz0.04915ECC, CE
5745-5805 MHz0.09315ECC, CE

Grants

TCB Grant - Application xCng+7iPDbKpTwGsUfLIFg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/09/2003

Application Dated: 05/09/2003
Airespace
110 Nortech Parkway
San Jose, CA 95134
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZWNAP1200AB
Name of Grantee:  Airespace
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 Dual Band Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.05  
CC CE 15E 5260.0  -  5320.0 0.049  
CC CE 15E 5745.0  -  5805.0 0.093  

Power output listed is conducted. The maximum output power on a channel adjacent to 5180, 5320, & 5805 MHZ band edges must be reduced as specified within this application. The use of external antenna(s) for the 5 GHz band requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement 15.407(d), any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those that are part of this device. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application xCng+7iPDbKpTwGsUfLIFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airespace
110 Nortech Parkway
San Jose, CA 95134
United States
  Date of Grant: 05/09/2003

Application Dated: 05/09/2003
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZWNAP1200AB
Name of Grantee:  Airespace
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 Dual Band Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.05  
CC CE 15E 5260.0  -  5320.0 0.049  
CC CE 15E 5745.0  -  5805.0 0.093  

Power output listed is conducted. The maximum output power on a channel adjacent to 5180, 5320, & 5805 MHZ band edges must be reduced as specified within this application. The use of external antenna(s) for the 5 GHz band requires the submission of a Class II permissive change application. In order to comply with the integral antenna requirement 15.407(d), any external antennas may not operate within the 5.15- 5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those that are part of this device. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application idpyDDh9adgrjguu+EJRsA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/09/2003

Application Dated: 05/09/2003
Airespace
110 Nortech Parkway
San Jose, CA 95134
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZWNAP1200AB
Name of Grantee:  Airespace
Equipment Class: Digital Transmission System
Notes: 802.11 Dual Band Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.035  

Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application idpyDDh9adgrjguu+EJRsA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Airespace
110 Nortech Parkway
San Jose, CA 95134
United States
  Date of Grant: 05/09/2003

Application Dated: 05/09/2003
 
Attention: Bob Friday , Sr. Scientist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QTZWNAP1200AB
Name of Grantee:  Airespace
Equipment Class: Digital Transmission System
Notes: 802.11 Dual Band Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.035  

Power output listed is conducted. The maximum output power on a channel adjacent to any band edge must be reduced as specified within this application. In order to comply with the integral antenna requirement 15.407(d), any external antennas may not operate within the 5.15-5.25 GHz UNII Band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: