FCC ID QV5MERCURY5EC
RFID Module
by JADAK, a business unit of Novanta Corporation
Grantee Code: QV5 Product Code: MERCURY5EC
Latest application date: 2010-11-18
FCC ID Device Details
| FCC ID | QV5MERCURY5EC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QV5 |
| Product Code | MERCURY5EC |
| Applicant Business | JADAK, a business unit of Novanta Corporation 🇺🇸 |
| Related Domains |  thingmagic.com |
| Equipment Class | RFID Module |
| Test Firm | Curtis-Straus LLC, a wholly owned subsidiary of Bu |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2010-11-18 |
| 902.75-927.25 MHz | Original Equipment | 2008-04-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2008-04-04 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2008-04-04 | PDF 987.4 KB |
| External Photos | External Photos | 2008-04-04 | PDF 987.4 KB |
| External Photos Antenna | External Photos | 2008-04-04 | PDF 2.9 MB |
| Label and Location | ID Label/Location Info | 2008-04-04 | PDF 397.8 KB |
| Test Setup Photos 1 | Test Setup Photos | 2008-04-04 | PDF 2 MB |
| Test Setup Photos 2 | Test Setup Photos | 2008-04-04 | PDF 2.3 MB |
| Test Setup Photos 3 | Test Setup Photos | 2008-04-04 | PDF 31.9 KB |
| Test Report | Test Report | 2010-11-18 | PDF 475.7 KB |
| Test Report | Test Report | 2008-04-04 | PDF 1.6 MB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2010-11-18 | PDF 206.8 KB |
| Cover Letter - Class II Permissive Change | Cover Letter(s) | 2010-11-18 | PDF 40.4 KB |
| Cover Letter - New component datasheet | Cover Letter(s) | 2010-11-18 | PDF 145.7 KB |
| Cover Letter - Old component datasheet | Cover Letter(s) | 2010-11-18 | PDF 349 KB |
| Agency | Cover Letter(s) | 2008-04-04 | PDF 75.8 KB |
| Confidentiality Request | Cover Letter(s) | 2008-04-04 | PDF 77.3 KB |
| Cover Letter Antenna Datasheet | Cover Letter(s) | 2008-04-04 | PDF 43.4 KB |
| Cover Letter Antenna Part Number Clarification | Cover Letter(s) | 2008-04-04 | PDF 98.6 KB |
| Cover Letter Modular Approval Request | Cover Letter(s) | 2008-04-04 | PDF 83.8 KB |
| RF Exposure Info | RF Exposure Info | 2008-04-04 | PDF 53.7 KB |
Application Information
| Application ID | j+7Jw4Gj3KScq85XVEzjCA== |
|---|---|
| Final Action Date | 2010-11-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008403743 |
| Model | MERCURY5EC |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Module |
| Responsible Party | Thomas Grant, General Manager, tgrant@thingmagic.com , 781-305-4322 |
| Test Firm | Tadas Stukas, Curtis-Straus LLC, a wholly owned subsidiary of Bu, tadas.stukas@us.bureauveritas.com  , 9784868880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to replace an obsolete amplifier as explained in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| j+7Jw4Gj3KScq85XVEzjCA== | 2010-11-18 | Class II permissive change or modification of presently authorized equipment |
| I1EXqMmTYkqcjCa2i0AE5Q== | 2008-04-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.1820000 | 15C |
Grants
TCB Grant - Application j+7Jw4Gj3KScq85XVEzjCA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/18/2010 Application Dated: 11/18/2010 |
| Trimble Navigation Limited |
| 1 Merrill St. |
| Woburn, MA 01801 |
| Attention: Thomas Grant , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QV5MERCURY5EC |
| Name of Grantee: | Trimble Navigation Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.182 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to replace an obsolete amplifier as explained in this filing. |
EAS Grant - Application j+7Jw4Gj3KScq85XVEzjCA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble Navigation Limited 1 Merrill St. Woburn, MA 01801 United States |
Date of Grant: 11/18/2010 Application Dated: 11/18/2010 |
| Attention: Thomas Grant , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QV5MERCURY5EC |
| Name of Grantee: | Trimble Navigation Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.182 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change to replace an obsolete amplifier as explained in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 04/04/2008 Application Dated: 04/04/2008 |
| Trimble Navigation Limited |
| 1 Merrill St. |
| Woburn, MA 01801 |
| Attention: Thomas Grant , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QV5MERCURY5EC |
| Name of Grantee: | Trimble Navigation Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.182 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application I1EXqMmTYkqcjCa2i0AE5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble Navigation Limited 1 Merrill St. Woburn, MA 01801 United States |
Date of Grant: 04/04/2008 Application Dated: 04/04/2008 |
| Attention: Thomas Grant , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QV5MERCURY5EC |
| Name of Grantee: | Trimble Navigation Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.182 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |