FCC ID QVBGS000

Slew Sensor

by Load Systems International, Inc.

Grantee Code: QVB   Product Code: GS000
Latest application date: 2010-09-20

FCC ID Device Details

FCC IDQVBGS000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQVB
Product CodeGS000
Applicant BusinessLoad Systems International, Inc. 🇨🇦
Related Domains loadsystems.com
Equipment ClassSlew Sensor
Test FirmNemko Canada Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.7-927.3 MHzClass II permissive change or modification of presently authorized equipment2010-09-20
902.7-927.3 MHzOriginal Equipment2007-05-31

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2007-05-31PDF 2.3 MB
External PhotosExternal Photos2010-09-20PDF 465.7 KB
ExternalExternal Photos2007-05-31PDF 31.8 KB
Label and Label LocationID Label/Location Info2010-09-20PDF 93.1 KB
LabelID Label/Location Info2007-05-31PDF 51.3 KB
Test Setup PhotosTest Setup Photos2010-09-20PDF 1.6 MB
Setup photosTest Setup Photos2007-05-31PDF 162.9 KB
Test ReportTest Report2010-09-20PDF 2.3 MB
Test reportTest Report2007-05-31PDF 730.4 KB
Cover lettersCover Letter(s)2010-09-20PDF 71.7 KB
AuthorityCover Letter(s)2007-05-31PDF 84.1 KB
ConfidentialityCover Letter(s)2007-05-31PDF 113.4 KB
Model differencesCover Letter(s)2007-05-31PDF 37.7 KB
RF exposure infoRF Exposure Info2010-09-20PDF 36.8 KB
MPERF Exposure Info2007-05-31PDF 24.4 KB

Application Information

Application IDe5ELhL7O8xu8s9bw+Zy/AA==
Final Action Date2010-09-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008042517
ModelGS000
Frequency Range902.7-927.3 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSlew Sensor
Responsible PartyEric Beaulieu, Engineer, ebeaulieu@loadsystems.com , 418-650-2330
Technical ContactEric Beaulieu, Load Systems International Inc., ebeaulieu@loadsystems.com , 418 650 2330
Non-Technical ContactBruno Pimpare, Load Systems International Inc., bpimpare@loadsystems.com , 418 650 2330
Test FirmStuart Beck, Nemko Canada Inc, stuart.beck@nemko.com , 6137379680
TCB EmailStuart.Beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
e5ELhL7O8xu8s9bw+Zy/AA==2010-09-20Class II permissive change or modification of presently authorized equipment
80smUFqlw1fsSmNiwkKqGQ==2007-05-31Original Equipment

Equipment Authorization

FrequencyOutputRules
902.7-927.3 MHz0.017700015C

Grants

TCB Grant - Application e5ELhL7O8xu8s9bw+Zy/AA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/20/2010

Application Dated: 09/17/2010
Load Systems International, Inc.
4495 Boul. Wilfrid-Hamel, Bureau 110
Quebec, G1P 2J7
Canada
 
Attention: Eric Beaulieu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QVBGS000
Name of Grantee:  Load Systems International, Inc.
Equipment Class: Digital Transmission System
Notes: Slew Sensor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.7  -  927.3 0.0177  

Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application e5ELhL7O8xu8s9bw+Zy/AA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Load Systems International, Inc.
4495 Boul. Wilfrid-Hamel, Bureau 110
Quebec, G1P 2J7
Canada
  Date of Grant: 09/20/2010

Application Dated: 09/17/2010
 
Attention: Eric Beaulieu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QVBGS000
Name of Grantee:  Load Systems International, Inc.
Equipment Class: Digital Transmission System
Notes: Slew Sensor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.7  -  927.3 0.0177  

Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 80smUFqlw1fsSmNiwkKqGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/31/2007

Application Dated: 05/31/2007
Load Systems International, Inc.
4495 Boul. Wilfrid-Hamel, Bureau 110
Quebec, G1P 2J7
Canada
 
Attention: Eric Beaulieu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QVBGS000
Name of Grantee:  Load Systems International, Inc.
Equipment Class: Digital Transmission System
Notes: Spread Spectrum Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.7  -  927.3 0.0177  

Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 80smUFqlw1fsSmNiwkKqGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Load Systems International, Inc.
4495 Boul. Wilfrid-Hamel, Bureau 110
Quebec, G1P 2J7
Canada
  Date of Grant: 05/31/2007

Application Dated: 05/31/2007
 
Attention: Eric Beaulieu , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QVBGS000
Name of Grantee:  Load Systems International, Inc.
Equipment Class: Digital Transmission System
Notes: Spread Spectrum Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.7  -  927.3 0.0177  

Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA410734