FCC ID QVT-WLAN-MP1
802.11 a/b/g Modular transmitter
by 3e Technologies International, Inc.
Grantee Code: QVT Product Code: WLANMP1
Latest application date: 2005-04-04
FCC ID Device Details
| FCC ID | QVT-WLAN-MP1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QVT |
| Product Code | WLANMP1 |
| Applicant Business | 3e Technologies International, Inc. 🇺🇸 |
| Related Domains |  ultra-3eti.com |
| Equipment Class | 802.11 a/b/g Modular transmitter |
| Test Firm | DNB Engineering, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2005-04-04 |
| 5270-5325 MHz | Original Equipment | 2005-04-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual revised | Users Manual | 2005-04-04 | PDF 1,006.9 KB |
| Internal photos | Internal Photos | 2005-04-04 | PDF 2.8 MB |
| External photos | External Photos | 2005-04-04 | PDF 275.5 KB |
| FCC ID label | ID Label/Location Info | 2005-04-04 | PDF 90.1 KB |
| Cond test setup photos rev | Test Setup Photos | 2005-04-04 | PDF 72 KB |
| Conducted set up photos rev | Test Setup Photos | 2005-04-04 | PDF 72 KB |
| Rad test setup photos rev | Test Setup Photos | 2005-04-04 | PDF 203.8 KB |
| Radiated setup photos rev | Test Setup Photos | 2005-04-04 | PDF 203.8 KB |
| Test report 1 rev 4 | Test Report | 2005-04-04 | PDF 3.6 MB |
| Test report 2 rev 4 | Test Report | 2005-04-04 | PDF 3.7 MB |
| Test report 3 rev 4 | Test Report | 2005-04-04 | PDF 3.6 MB |
| Test report 4 rev 4 | Test Report | 2005-04-04 | PDF 2.4 MB |
| Test reprot 3 rev 4 | Test Report | 2005-04-04 | PDF 3.6 MB |
| ATCB comments | Cover Letter(s) | 2005-04-04 | PDF 58.4 KB |
| POA | Cover Letter(s) | 2005-04-04 | PDF 51.5 KB |
| POA | Cover Letter(s) | 2005-04-04 | PDF 51.5 KB |
| Request for confidentiality | Cover Letter(s) | 2005-04-04 | PDF 20.8 KB |
| Request for confidentiliality | Cover Letter(s) | 2005-04-04 | PDF 20.8 KB |
| Request for modular approval | Cover Letter(s) | 2005-04-04 | PDF 63.6 KB |
| Request for modular approval | Cover Letter(s) | 2005-04-04 | PDF 63.6 KB |
| Response | Cover Letter(s) | 2005-04-04 | PDF 54 KB |
| Response to ATCB | Cover Letter(s) | 2005-04-04 | PDF 54 KB |
| MPE | RF Exposure Info | 2005-04-04 | PDF 11.2 KB |
| Block diagram Metadata only | Block Diagram | PDF 23.2 KB | |
| Schematics Metadata only | Schematics | PDF 119.2 KB | |
| Operational description Metadata only | Operational Description | PDF 43.7 KB |
Application Information
| Application ID | wbRbAf6ILgaMz83R9RwsrA== |
|---|---|
| Final Action Date | 2005-04-04 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0020714200 |
| Model | WLAN-MP1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g Modular transmitter |
| Responsible Party | Brian Garcia, Vice President of Contracts, brian.garcia@ultra-3eti.com , 301-670-1261 |
| Agent | Les Les Les, DNB Engineering Inc, Les@dnbenginc.com  |
| Technical Contact | Les Payne, DNB Engineering Inc, Les@dnbenginc.com |
| Test Firm | Michael Neis, DNB Engineering, Inc., miken@dnbenginc.com , 714-870-7781 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) listed in the filing may be used. The antenna used for this transmitter must be installed to provide a minimum separation distance of at 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wbRbAf6ILgaMz83R9RwsrA== | 2005-04-04 | Original Equipment |
| qV6z1n1HOpl/DyC5njgdLQ== | 2005-04-04 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wbRbAf6ILgaMz83R9RwsrA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2005 Application Dated: 04/04/2005 |
| 3e Technologies International, Inc. |
| 12410 Milestone Center Drive, Suite 650 |
| Germantown, MD 20876 |
| Attention: Brian Garcia , Vice President of Contracts |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QVT-WLAN-MP1 |
| Name of Grantee: | 3e Technologies International, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Modular transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.115 | ||
| CC | 15C | 5735.0 - 5840.0 | 0.023 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) listed in the filing may be used. The antenna used for this transmitter must be installed to provide a minimum separation distance of at 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wbRbAf6ILgaMz83R9RwsrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3e Technologies International, Inc. 12410 Milestone Center Drive, Suite 650 Germantown, MD 20876 United States |
Date of Grant: 04/04/2005 Application Dated: 04/04/2005 |
| Attention: Brian Garcia , Vice President of Contracts |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QVT-WLAN-MP1 |
| Name of Grantee: | 3e Technologies International, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g Modular transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.115 | ||
| CC | 15C | 5735.0 - 5840.0 | 0.023 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) listed in the filing may be used. The antenna used for this transmitter must be installed to provide a minimum separation distance of at 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/04/2005 Application Dated: 04/04/2005 |
| 3e Technologies International, Inc. |
| 12410 Milestone Center Drive, Suite 650 |
| Germantown, MD 20876 |
| Attention: Brian Garcia , Vice President of Contracts |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QVT-WLAN-MP1 |
| Name of Grantee: | 3e Technologies International, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Modular transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5270.0 - 5325.0 | 0.136 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) listed in the filing may be used. The antenna used for this transmitter must be installed to provide a minimum separation distance of at 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qV6z1n1HOpl/DyC5njgdLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
3e Technologies International, Inc. 12410 Milestone Center Drive, Suite 650 Germantown, MD 20876 United States |
Date of Grant: 04/04/2005 Application Dated: 04/04/2005 |
| Attention: Brian Garcia , Vice President of Contracts |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QVT-WLAN-MP1 |
| Name of Grantee: | 3e Technologies International, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g Modular transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5270.0 - 5325.0 | 0.136 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) listed in the filing may be used. The antenna used for this transmitter must be installed to provide a minimum separation distance of at 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |