FCC ID QWP-50650
Wireless Ethernet Bridge
by Cambium Networks Limited
Grantee Code: QWP Product Code: 50650
Latest application date: 2017-03-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5156-5247 MHz | Class III permissive change to software defined radio | 2017-03-09 |
| 5156-5247 MHz | Class III permissive change to software defined radio | 2016-05-31 |
| 5156-5247 MHz | Class III permissive change to software defined radio | 2014-07-22 |
| 5255-5345 MHz | Class III permissive change to software defined radio | 2013-12-18 |
| 4943-4987 MHz | Class III permissive change to software defined radio | 2013-10-23 |
| 5728-5847 MHz | Original Equipment | 2013-09-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Guide Part 1 | Users Manual | 2014-12-01 | PDF 4 MB |
| User Guide Part 2 | Users Manual | 2014-12-01 | PDF 4.1 MB |
| User Guide Part 3 | Users Manual | 2014-12-01 | PDF 3.3 MB |
| User Installation Manual Part 1 Metadata only | Users Manual | 2014-12-01 | PDF 5.2 MB |
| User Installation Manual Part 2 Metadata only | Users Manual | 2014-12-01 | PDF 3.2 MB |
| User Manual Part 1 | Users Manual | 2014-03-29 | PDF 4 MB |
| User Manual Part 2 | Users Manual | 2014-03-29 | PDF 4.4 MB |
| Installation Guide | Users Manual | 2014-01-27 | PDF 1.9 MB |
| User Manual Part 1 | Users Manual | 2014-01-27 | PDF 3.5 MB |
| User Manual Part 2 | Users Manual | 2014-01-27 | PDF 4.4 MB |
| Internal Photos | Internal Photos | 2014-03-29 | PDF 2.6 MB |
| External Photos 1 | External Photos | 2014-03-29 | PDF 1 MB |
| External Photos 2 | External Photos | 2014-03-29 | PDF 1,020.7 KB |
| Label Detail | ID Label/Location Info | 2013-12-18 | PDF 236.1 KB |
| Label Position | ID Label/Location Info | 2013-12-18 | PDF 113.5 KB |
| Test Set-Up Photos | Test Setup Photos | 2014-12-01 | PDF 1.5 MB |
| Test Set Up | Test Setup Photos | 2014-03-29 | PDF 3.2 MB |
| Test Set Up | Test Setup Photos | 2014-01-27 | PDF 2 MB |
| Test Report 01 | Test Report | 2017-03-09 | PDF 5.7 MB |
| Test Report 02 | Test Report | 2017-03-09 | PDF 3.7 MB |
| DFS Test Report Part 1 | Test Report | 2016-05-31 | PDF 5.7 MB |
| DFS Test Report Part 2 | Test Report | 2016-05-31 | PDF 3.7 MB |
| Test Report Part 1 | Test Report | 2014-07-22 | PDF 3.1 MB |
| Test Report Part 2 | Test Report | 2014-07-22 | PDF 3.2 MB |
| DFS Report | Test Report | 2013-12-18 | PDF 3.4 MB |
| Test Report Part 1 | Test Report | 2013-12-18 | PDF 1.3 MB |
| Test Report Part 2 | Test Report | 2013-12-18 | PDF 5.5 MB |
| Test Report Part 3 | Test Report | 2013-12-18 | PDF 4.3 MB |
| Test Report Part 4 | Test Report | 2013-12-18 | PDF 2.3 MB |
| Test Report | Test Report | 2013-10-23 | PDF 4.4 MB |
| Test Report | Test Report | 2013-09-24 | PDF 5.3 MB |
| Attestation Letter | Attestation Statements | 2017-03-09 | PDF 80.7 KB |
| New Rules SW Attestation | Attestation Statements | 2016-05-31 | PDF 152.6 KB |
| New Rules UNII 2A 2C Attestation | Attestation Statements | 2016-05-31 | PDF 145.5 KB |
| Attestation Letter 1 | Attestation Statements | 2014-07-22 | PDF 60.9 KB |
| Attestation Letter 2 | Attestation Statements | 2014-07-22 | PDF 71.2 KB |
| Attestation Letter 3 | Attestation Statements | 2014-07-22 | PDF 60.3 KB |
| DFS Attestation | Attestation Statements | 2013-12-18 | PDF 50.5 KB |
| Frequency Bands Attestation | Attestation Statements | 2013-12-18 | PDF 34.6 KB |
| Professional Installation Confirmation | Attestation Statements | 2013-12-18 | PDF 71.2 KB |
| Software Statement | Attestation Statements | 2013-12-18 | PDF 60.8 KB |
| SW Statement Letter | Attestation Statements | 2013-10-23 | PDF 58.2 KB |
| Application Confirmation Details | Attestation Statements | 2013-09-24 | PDF 116.2 KB |
| Proffesional Installation Confirmation | Attestation Statements | 2013-09-24 | PDF 71.2 KB |
| Authorization Letter | Cover Letter(s) | 2017-03-09 | PDF 157.8 KB |
| Cover Letter | Cover Letter(s) | 2017-03-09 | PDF 110.8 KB |
| Authorisation Letter | Cover Letter(s) | 2016-05-31 | PDF 129.1 KB |
| Confidentiality Request | Cover Letter(s) | 2016-05-31 | PDF 135.7 KB |
| Permissive Change Request | Cover Letter(s) | 2016-05-31 | PDF 134.4 KB |
| Agency Letter | Cover Letter(s) | 2014-07-22 | PDF 38.4 KB |
| Permanent Confidentiality Letter | Cover Letter(s) | 2014-07-22 | PDF 69.6 KB |
| Permissive Change Letter | Cover Letter(s) | 2014-07-22 | PDF 38.2 KB |
| STC Letter | Cover Letter(s) | 2014-07-22 | PDF 44.8 KB |
| Agency Form | Cover Letter(s) | 2013-12-18 | PDF 38.4 KB |
| Confidentiality Request | Cover Letter(s) | 2013-12-18 | PDF 63.1 KB |
| Permissive Change Request | Cover Letter(s) | 2013-12-18 | PDF 36.2 KB |
| ST Confidentiality Request | Cover Letter(s) | 2013-12-18 | PDF 44.9 KB |
| Agency Form | Cover Letter(s) | 2013-10-23 | PDF 38.4 KB |
| Permissive Change Request | Cover Letter(s) | 2013-10-23 | PDF 35.9 KB |
| ST Confidentiality Request | Cover Letter(s) | 2013-10-23 | PDF 44.9 KB |
| Agency Form | Cover Letter(s) | 2013-09-24 | PDF 85.8 KB |
| ST Confidentiality Request | Cover Letter(s) | 2013-09-24 | PDF 68.3 KB |
| Test Rationale | Cover Letter(s) | 2013-09-24 | PDF 88.8 KB |
| RF Exposure Analysis | RF Exposure Info | 2014-07-22 | PDF 209.2 KB |
| MPE Calculation | RF Exposure Info | 2013-12-18 | PDF 177.8 KB |
| SDR Block Diagram phn 3486 Metadata only | Operational Description | PDF 69.7 KB | |
| Antenna Information Metadata only | Operational Description | PDF 109.5 KB | |
| Configuration Description Metadata only | Operational Description | PDF 95.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 106.1 KB | |
| SDR Software - Security Information Metadata only | SDR Software/Security Inf | PDF 101.3 KB | |
| SDR Sotware Security Info Metadata only | SDR Software/Security Inf | PDF 69.1 KB | |
| SW Security Information Metadata only | SDR Software/Security Inf | PDF 88.5 KB | |
| UNII Software Security Info Metadata only | SDR Software/Security Inf | PDF 88.5 KB |
Application Information
| Application ID | v7iMUtv1QwBpe216p1rD5A== |
|---|---|
| Final Action Date | 2017-03-09 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0021132279 |
| Model | 50650 |
| Frequency Range | 5156-5247 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Ethernet Bridge |
| Responsible Party | Don Reid, Mr, Don.Reid@Cambiumnetworks.com  , +44 1364 655667 |
| Technical Contact | Donald W Reid, Cambium Networks Limited, don.reid@cambiumnetworks.com , 00441364655667 |
| Non-Technical Contact | Mark - Thomas, Cambium Networks Limited, mark.thomas@cambiumnetworks.com , 00441364655586 |
| Test Firm | Darren Rust, UL VS Ltd, darren.rust@ul.com  , +44 1256 31 2119 |
| TCB Email | certification@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | This device has 5/10/15/20/30/40 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to UNII bands 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing. Class III Permissive Change to add UNII band 3 to ensure compliance to the updated U-NII rules (FCC R&O 14-30) as detailed within this filing |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| v7iMUtv1QwBpe216p1rD5A== | 2017-03-09 | Class III permissive change to software defined radio |
| rGJLHcQXlHtQW64iglBLEA== | 2016-05-31 | Class III permissive change to software defined radio |
| LescdQ/kD0vv60Mb1krTXg== | 2014-07-22 | Class III permissive change to software defined radio |
| HWNM2tElOv8TSY6UZhfAeQ== | 2013-12-18 | Class III permissive change to software defined radio |
| I6lkqrfuhAWQZ9S38qlzFw== | 2013-10-23 | Class III permissive change to software defined radio |
| vFM57qstz4xQgGpoJ3VIRw== | 2013-09-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 4943-4987 MHz | 0.25 | 1ppm | 4M50G7D | 9 | 36, MO |
| 4945-4985 MHz | 0.25 | 1ppm | 9M00D7D | 9 | 36, MO |
| 4948-4982 MHz | 0.27 | 1ppm | 13M6D7D | 9 | 36, MO |
| 4950-4980 MHz | 0.27 | 1ppm | 18M1D7D | 9 | 36, MO |
| 5156-5247 MHz | 0.076 | 15E | 36, 39, CC, MO | ||
| 5156-5247 MHz | 0.076 | 15E | 36, 48, CC, MO | ||
| 5156-5247 MHz | 0.076 | 15E | 36, 48, MO | ||
| 5255-5345 MHz | 0.025 | 15E | 36, CC, MO, ND | ||
| 5255-5345 MHz | 0.025 | 15E | 36, 48, CC, MO, ND | ||
| 5255-5345 MHz | 0.025 | 15E | 36, 48, MO, ND | ||
| 5475-5595 MHz | 0.025 | 15E | 36, CC, MO, ND | ||
| 5475-5720 MHz | 0.025 | 15E | 36, 48, CC, MO, ND | ||
| 5475-5720 MHz | 0.025 | 15E | 36, 48, MO, ND | ||
| 5655-5720 MHz | 0.025 | 15E | 36, CC, MO, ND | ||
| 5728-5847 MHz | 0.6500000 | 15C | 36, MO | ||
| 5728-5847 MHz | 0.65 | 15E | 36, 48, MO |
Grants
TCB Grant - Application vFM57qstz4xQgGpoJ3VIRw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 09/24/2013 Application Dated: 09/04/2013 |
| Cambium Networks Limited |
| Unit B2 Linhay Business Park |
| Eastern Road |
| Ashburton, Devon, TQ13 7UP United Kingdom |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Ethernet Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 5728.0 - 5847.0 | 0.65 |
| Output power is conducted. This device supports MIMO operations as described in this filing. The device supports 5MHz, 10MHz, 15MHz, 20MHz, 30MHz, 40MHz and 45MHz bandwidths. Professional installation is required for devices with external antenna connectors. To comply with RF exposure requirements antennas must be installed to ensure a minimum separation distance of 4.3m from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vFM57qstz4xQgGpoJ3VIRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 09/24/2013 Application Dated: 09/04/2013 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 15C | 5728.0 - 5847.0 | 0.65 |
| Output power is conducted. This device supports MIMO operations as described in this filing. The device supports 5MHz, 10MHz, 15MHz, 20MHz, 30MHz, 40MHz and 45MHz bandwidths. Professional installation is required for devices with external antenna connectors. To comply with RF exposure requirements antennas must be installed to ensure a minimum separation distance of 4.3m from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 03/09/2017 Application Dated: 03/01/2017 |
| Cambium Networks Limited |
| Unit B2 Linhay Business Park |
| Eastern Road |
| Ashburton, Devon, TQ13 7UP United Kingdom |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 48 MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 48 MO ND | 15E | 5475.0 - 5720.0 | 0.025 | ||
| 36 48 MO | 15E | 5728.0 - 5847.0 | 0.65 |
| This device has 5/10/15/20/30/40 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to UNII bands 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing. Class III Permissive Change to add UNII band 3 to ensure compliance to the updated U-NII rules (FCC R&O 14-30) as detailed within this filing |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application v7iMUtv1QwBpe216p1rD5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 03/09/2017 Application Dated: 03/01/2017 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 48 MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 48 MO ND | 15E | 5475.0 - 5720.0 | 0.025 | ||
| 36 48 MO | 15E | 5728.0 - 5847.0 | 0.65 |
| This device has 5/10/15/20/30/40 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to UNII bands 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing. Class III Permissive Change to add UNII band 3 to ensure compliance to the updated U-NII rules (FCC R&O 14-30) as detailed within this filing |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/31/2016 Application Dated: 04/06/2016 |
| Cambium Networks Limited |
| Unit B2 Linhay Business Park |
| Eastern Road |
| Ashburton, Devon, TQ13 7UP United Kingdom |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 CC MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 48 CC MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 48 CC MO ND | 15E | 5475.0 - 5720.0 | 0.025 |
| This device has 5/10/15/20/30/40 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to UNII bands 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rGJLHcQXlHtQW64iglBLEA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 05/31/2016 Application Dated: 04/06/2016 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 CC MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 48 CC MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 48 CC MO ND | 15E | 5475.0 - 5720.0 | 0.025 |
| This device has 5/10/15/20/30/40 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class III Permissive Change to UNII bands 2a and 2c to ensure compliance to the updated U-NII rules as detailed within this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 07/22/2014 Application Dated: 06/12/2014 |
| Cambium Networks Limited |
| Unit B2 Linhay Business Park |
| Eastern Road |
| Ashburton, Devon, TQ13 7UP United Kingdom |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 39 CC MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 CC MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5475.0 - 5595.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5655.0 - 5720.0 | 0.025 |
| This device has 5/10/15/20/30/40/45 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application LescdQ/kD0vv60Mb1krTXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 07/22/2014 Application Dated: 06/12/2014 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 39 CC MO | 15E | 5156.0 - 5247.0 | 0.076 | ||
| 36 CC MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5475.0 - 5595.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5655.0 - 5720.0 | 0.025 |
| This device has 5/10/15/20/30/40/45 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. Class III Permissive Change to add UNII band 1 (5150-5250MHz): The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 112cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL VS Ltd Unit 3 Horizon, Wade Road, Kingsland Business Park, Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 10/23/2013 Application Dated: 10/22/2013 |
| Cambium Networks Limited |
| Unit B2 Linhay Business Park |
| Eastern Road |
| Ashburton, Devon, TQ13 7UP United Kingdom |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Wireless Ethernet Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 90 | 4943.0 - 4987.0 | 0.25 | 1.0 PM | 4M50G7D |
| 36 MO | 90 | 4945.0 - 4985.0 | 0.25 | 1.0 PM | 9M00D7D |
| 36 MO | 90 | 4948.0 - 4982.0 | 0.27 | 1.0 PM | 13M6D7D |
| 36 MO | 90 | 4950.0 - 4980.0 | 0.27 | 1.0 PM | 18M1D7D |
| Output power is conducted. This device supports MIMO operations as described in this filing. The device supports 5MHz, 10MHz, 15MHz, 20MHz, bandwidths. Professional installation is required for devices with external antenna connectors. To comply with RF exposure requirements antennas must be installed to ensure a minimum separation distance of 1.89m from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application I6lkqrfuhAWQZ9S38qlzFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 10/23/2013 Application Dated: 10/22/2013 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 MO | 90 | 4943.0 - 4987.0 | 0.25 | 1.0 PM | 4M50G7D |
| 36 MO | 90 | 4945.0 - 4985.0 | 0.25 | 1.0 PM | 9M00D7D |
| 36 MO | 90 | 4948.0 - 4982.0 | 0.27 | 1.0 PM | 13M6D7D |
| 36 MO | 90 | 4950.0 - 4980.0 | 0.27 | 1.0 PM | 18M1D7D |
| Output power is conducted. This device supports MIMO operations as described in this filing. The device supports 5MHz, 10MHz, 15MHz, 20MHz, bandwidths. Professional installation is required for devices with external antenna connectors. To comply with RF exposure requirements antennas must be installed to ensure a minimum separation distance of 1.89m from persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cambium Networks Limited Unit B2 Linhay Business Park Eastern Road Ashburton, Devon, TQ13 7UP United Kingdom |
Date of Grant: 12/18/2013 Application Dated: 10/23/2013 |
| Attention: Don Reid , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWP-50650 |
| Name of Grantee: | Cambium Networks Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Ethernet Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO ND | 15E | 5255.0 - 5345.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5475.0 - 5595.0 | 0.025 | ||
| 36 CC MO ND | 15E | 5655.0 - 5720.0 | 0.025 |
| This application was originally granted on 11/26/2013. |
| This device has 5/10/15/20/30/40/45 MHz BW modes. Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 80 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and professional installers are not allowed to have options to select country code. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |