FCC ID QWY-V1140-100
GSM/GPRS/UMTS/HSDPA/HSUPA Module
by VALEO Telematik und Akustik GmbH
Grantee Code: QWY Product Code: V1140100
Latest application date: 2015-05-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2015-05-13 |
| 824.2-848.8 MHz | Original Equipment | 2014-09-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 08 user guide | Users Manual | 2015-03-08 | PDF 1.5 MB |
| 03_Internal photos | Internal Photos | 2015-11-09 | PDF 346.5 KB |
| 09 internal photos | Internal Photos | 2015-03-08 | PDF 1.6 MB |
| 02a_External photos | External Photos | 2015-11-09 | PDF 358.8 KB |
| 02b_External photos with Host | External Photos | 2015-11-09 | PDF 725.2 KB |
| 03 external photos | External Photos | 2015-03-08 | PDF 542.7 KB |
| 03 external photos with ancillary equipment | External Photos | 2015-03-08 | PDF 1 MB |
| 01 Label and Placement | ID Label/Location Info | 2014-09-09 | PDF 142.5 KB |
| 07_Test setup photos | Test Setup Photos | 2015-11-09 | PDF 462.2 KB |
| 07 test setup GSM | Test Setup Photos | 2015-03-08 | PDF 632.4 KB |
| 07 test setup LTE | Test Setup Photos | 2015-03-08 | PDF 1.1 MB |
| 08a_Test report | Test Report | 2015-05-13 | PDF 912.2 KB |
| 08b_Test report_plots | Test Report | 2015-05-13 | PDF 266.6 KB |
| 06 Test report GSM | Test Report | 2014-09-09 | PDF 1.5 MB |
| 06 Test report GSM plots | Test Report | 2014-09-09 | PDF 1.9 MB |
| 06 Test report LTE | Test Report | 2014-09-09 | PDF 1.6 MB |
| 06 Test report LTE plots | Test Report | 2014-09-09 | PDF 3.1 MB |
| 13 Justification Letter | Attestation Statements | 2014-09-09 | PDF 50.3 KB |
| 01_Cover Letter_Class II Permissive Change Request | Cover Letter(s) | 2015-05-13 | PDF 52.3 KB |
| 01a_Cover Letter_V1140-10x_Memory_Change_V03 | Cover Letter(s) | 2015-05-13 | PDF 547.8 KB |
| 01b_Cover Letter_V1140-10x_Shielding_Change_V03 | Cover Letter(s) | 2015-05-13 | PDF 560.7 KB |
| 01c_Cover Letter_STC_Confidentiality Request Letter (short term)_signed | Cover Letter(s) | 2015-05-13 | PDF 46.6 KB |
| 01e_Cover Letter_Authorization-Letter | Cover Letter(s) | 2015-05-13 | PDF 36 KB |
| 02 Authorization letter | Cover Letter(s) | 2014-09-09 | PDF 36 KB |
| 02 request for STC | Cover Letter(s) | 2014-09-09 | PDF 46.6 KB |
| 02 request for confidentiality | Cover Letter(s) | 2014-09-09 | PDF 43.7 KB |
| 13 Request for Modular Approval | Cover Letter(s) | 2014-09-09 | PDF 63.6 KB |
| 09_RF Exposure Info | RF Exposure Info | 2015-05-13 | PDF 1,014.9 KB |
| 11 MPE report | RF Exposure Info | 2014-09-09 | PDF 1.3 MB |
| Manual Metadata only | Operational Description | PDF 1.5 MB | |
| 04 Block diagram Metadata only | Block Diagram | PDF 213.9 KB | |
| 05 schematics Metadata only | Schematics | PDF 4.3 MB | |
| 05_Operational description_ATM_Roof_path_loss_and_gain Metadata only | Operational Description | PDF 468 KB | |
| 12 operational description Metadata only | Operational Description | PDF 447.1 KB | |
| 04_BOM Metadata only | Parts List/Tune Up Info | PDF 78.3 KB | |
| 06_Tune-Up-Information Metadata only | Parts List/Tune Up Info | PDF 186.2 KB | |
| 10 Tune up info Metadata only | Parts List/Tune Up Info | PDF 186.2 KB | |
| 10 part list Metadata only | Parts List/Tune Up Info | PDF 42.2 KB |
Application Information
| Application ID | 2w3qeMkTIqmueXR9kThYkQ== |
|---|---|
| Final Action Date | 2015-05-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009359555 |
| Model | V1140-100 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Responsible Party | Marco Okhovat-Esfehani, Mr., marco.okhovat-esfehani@valeo.com  , 0049 6172 767 |
| Test Firm | Niels Jess, CETECOM GmbH, niels.jess@cetecom.com  , +49 2054 9519 603 |
| TCB Email | gerald.schmidt@cetecom.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/09/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz, 7.01dBi at 1900 MHz and 13.21dBi at 2600MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E and 27. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 2w3qeMkTIqmueXR9kThYkQ== | 2015-05-13 | Class II permissive change or modification of presently authorized equipment |
| IKMiOPJk4NJMJxPTezEM/A== | 2014-09-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824.2-848.8 MHz | 0.58 | 0.02ppm | 247KG7W | 22H |
| 1850.2-1909.8 MHz | 0.79 | 0.02ppm | 247KGXW | 24E |
| 1850.2-1909.8 MHz | 0.37 | 0.02ppm | 247KG7W | 24E |
| 2502.5-2567.5 MHz | 0.733 | 0.0116ppm | 4M47G7D | 27 |
| 2502.5-2567.5 MHz | 0.76 | 0.0116ppm | 4M47W7D | 27 |
| 2505-2565 MHz | 0.759 | 0.0116ppm | 8M92G7D | 27 |
| 2505-2565 MHz | 0.75 | 0.0116ppm | 8M94W7D | 27 |
| 2507.5-2562.5 MHz | 0.766 | 0.0116ppm | 13M4W7D | 27 |
| 2507.5-2562.5 MHz | 0.776 | 0.0116ppm | 13M4G7D | 27 |
| 2510-2560 MHz | 0.746 | 0.0116ppm | 17M8G7D | 27 |
| 2510-2560 MHz | 0.76 | 0.0116ppm | 17M8W7D | 27 |
Grants
TCB Grant - Application IKMiOPJk4NJMJxPTezEM/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 09/09/2014 Application Dated: 09/09/2014 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-100 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.58 | 0.02 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.79 | 0.02 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.37 | 0.02 PM | 247KG7W | |
| 27 | 2502.5 - 2567.5 | 0.733 | 0.0116 PM | 4M47G7D | |
| 27 | 2502.5 - 2567.5 | 0.76 | 0.0116 PM | 4M47W7D | |
| 27 | 2505.0 - 2565.0 | 0.759 | 0.0116 PM | 8M92G7D | |
| 27 | 2505.0 - 2565.0 | 0.75 | 0.0116 PM | 8M94W7D | |
| 27 | 2507.5 - 2562.5 | 0.776 | 0.0116 PM | 13M4G7D | |
| 27 | 2507.5 - 2562.5 | 0.766 | 0.0116 PM | 13M4W7D | |
| 27 | 2510.0 - 2560.0 | 0.746 | 0.0116 PM | 17M8G7D | |
| 27 | 2510.0 - 2560.0 | 0.76 | 0.0116 PM | 17M8W7D |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations, as specified in this filing, the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz, 3.01dBi at 1900 MHz and 9.21 dBi at 2600 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E and 27. This device limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
EAS Grant - Application IKMiOPJk4NJMJxPTezEM/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 09/09/2014 Application Dated: 09/09/2014 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-100 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.58 | 0.02 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.79 | 0.02 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.37 | 0.02 PM | 247KG7W | |
| 27 | 2502.5 - 2567.5 | 0.733 | 0.0116 PM | 4M47G7D | |
| 27 | 2502.5 - 2567.5 | 0.76 | 0.0116 PM | 4M47W7D | |
| 27 | 2505.0 - 2565.0 | 0.759 | 0.0116 PM | 8M92G7D | |
| 27 | 2505.0 - 2565.0 | 0.75 | 0.0116 PM | 8M94W7D | |
| 27 | 2507.5 - 2562.5 | 0.776 | 0.0116 PM | 13M4G7D | |
| 27 | 2507.5 - 2562.5 | 0.766 | 0.0116 PM | 13M4W7D | |
| 27 | 2510.0 - 2560.0 | 0.746 | 0.0116 PM | 17M8G7D | |
| 27 | 2510.0 - 2560.0 | 0.76 | 0.0116 PM | 17M8W7D |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations, as specified in this filing, the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz, 3.01dBi at 1900 MHz and 9.21 dBi at 2600 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E and 27. This device limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must insure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 05/13/2015 Application Dated: 05/07/2015 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-100 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.58 | 0.02 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.79 | 0.02 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.37 | 0.02 PM | 247KG7W | |
| 27 | 2502.5 - 2567.5 | 0.733 | 0.0116 PM | 4M47G7D | |
| 27 | 2502.5 - 2567.5 | 0.76 | 0.0116 PM | 4M47W7D | |
| 27 | 2505.0 - 2565.0 | 0.759 | 0.0116 PM | 8M92G7D | |
| 27 | 2505.0 - 2565.0 | 0.75 | 0.0116 PM | 8M94W7D | |
| 27 | 2507.5 - 2562.5 | 0.776 | 0.0116 PM | 13M4G7D | |
| 27 | 2507.5 - 2562.5 | 0.766 | 0.0116 PM | 13M4W7D | |
| 27 | 2510.0 - 2560.0 | 0.746 | 0.0116 PM | 17M8G7D | |
| 27 | 2510.0 - 2560.0 | 0.76 | 0.0116 PM | 17M8W7D |
| Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz, 7.01dBi at 1900 MHz and 13.21dBi at 2600MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E and 27. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
EAS Grant - Application 2w3qeMkTIqmueXR9kThYkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 05/13/2015 Application Dated: 05/07/2015 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-100 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.58 | 0.02 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.79 | 0.02 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.37 | 0.02 PM | 247KG7W | |
| 27 | 2502.5 - 2567.5 | 0.733 | 0.0116 PM | 4M47G7D | |
| 27 | 2502.5 - 2567.5 | 0.76 | 0.0116 PM | 4M47W7D | |
| 27 | 2505.0 - 2565.0 | 0.759 | 0.0116 PM | 8M92G7D | |
| 27 | 2505.0 - 2565.0 | 0.75 | 0.0116 PM | 8M94W7D | |
| 27 | 2507.5 - 2562.5 | 0.776 | 0.0116 PM | 13M4G7D | |
| 27 | 2507.5 - 2562.5 | 0.766 | 0.0116 PM | 13M4W7D | |
| 27 | 2510.0 - 2560.0 | 0.746 | 0.0116 PM | 17M8G7D | |
| 27 | 2510.0 - 2560.0 | 0.76 | 0.0116 PM | 17M8W7D |
| Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz, 7.01dBi at 1900 MHz and 13.21dBi at 2600MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E and 27. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. |
| Mail To: |