FCC ID QWY-V1140-103
GSM/GRPRS/UMTS/HSDPA/HSUPA Module
by VALEO Telematik und Akustik GmbH
Grantee Code: QWY Product Code: V1140103
Latest application date: 2016-05-23
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-23 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2015-05-07 |
| 824.2-848.8 MHz | Original Equipment | 2014-06-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| v1140-103-1_pcc2_request_v3_signed | Users Manual | 2016-05-23 | PDF 45.3 KB |
| v1140-10x-1_usermanual_v16 | Users Manual | 2016-05-23 | PDF 1.4 MB |
| User Manual_v09 | Users Manual | 2014-12-15 | PDF 1.2 MB |
| lte-nad-v1140-103-1_int_photo | Internal Photos | 2016-05-23 | PDF 424.8 KB |
| 2_Internal photos.pdf | Internal Photos | 2015-11-03 | PDF 358 KB |
| Internal photos | Internal Photos | 2014-12-15 | PDF 1.2 MB |
| lte-nad_v1140-103-1_ext_photos | External Photos | 2016-05-23 | PDF 526.9 KB |
| 1a_External photos of EUT .pdf | External Photos | 2015-11-03 | PDF 354.6 KB |
| 1b_External photos of EUT with host.pdf | External Photos | 2015-11-03 | PDF 534.5 KB |
| External photos | External Photos | 2014-12-15 | PDF 543.9 KB |
| External photos_Annex RF Exposure report | External Photos | 2014-12-15 | PDF 461.1 KB |
| External photos_Annex Test report | External Photos | 2014-12-15 | PDF 1.1 MB |
| Label and Label Location | ID Label/Location Info | 2014-06-20 | PDF 144.8 KB |
| test setup photos | Test Setup Photos | 2016-05-23 | PDF 473.5 KB |
| 7_Test setup photos.pdf | Test Setup Photos | 2015-11-03 | PDF 444.2 KB |
| Test setup photos | Test Setup Photos | 2014-12-15 | PDF 567.6 KB |
| test report_radiated | Test Report | 2016-05-23 | PDF 1 MB |
| test report_radiated_annex1 | Test Report | 2016-05-23 | PDF 394.8 KB |
| 8a_Test report.pdf | Test Report | 2015-05-07 | PDF 928 KB |
| 8b_Test report_plots.pdf | Test Report | 2015-05-07 | PDF 269.7 KB |
| Test report_GSM | Test Report | 2014-06-20 | PDF 1.4 MB |
| Test report_GSM_Annex | Test Report | 2014-06-20 | PDF 2.1 MB |
| Test report_WCDMA | Test Report | 2014-06-20 | PDF 1.4 MB |
| Test report_WCDMA_Annex | Test Report | 2014-06-20 | PDF 1.2 MB |
| cover letter_authorization-letter | Cover Letter(s) | 2016-05-23 | PDF 36 KB |
| lte-nad-v1140-103-1 confidentiality request letter (permanent)_signed | Cover Letter(s) | 2016-05-23 | PDF 46.7 KB |
| v1140-103-1_hw_changes_v04 | Cover Letter(s) | 2016-05-23 | PDF 312.7 KB |
| 3a_Cover Letter - V1140-10x_Memory_Change_V03.pdf | Cover Letter(s) | 2015-05-07 | PDF 547.8 KB |
| 3b_Cover Letter - V1140-10x_Shielding_Change_V03.pdf | Cover Letter(s) | 2015-05-07 | PDF 560.7 KB |
| 3c_Cover Letter_Confidentiality Request Letter (permanent).pdf | Cover Letter(s) | 2015-05-07 | PDF 43.1 KB |
| 3d_Cover Letter_Permissive Change Request_V1140-103_signed.pdf | Cover Letter(s) | 2015-05-07 | PDF 52.6 KB |
| 3e_Cover Letter_Authorization-Letter.pdf | Cover Letter(s) | 2015-05-07 | PDF 36 KB |
| 3f_Cover Letter_Confidentiality Request Letter (short term) | Cover Letter(s) | 2015-05-07 | PDF 45.3 KB |
| Cover Letter_Confidentiality Request Letter (permanent) | Cover Letter(s) | 2014-06-20 | PDF 43.1 KB |
| Cover Letter_Confidentiality Request Letter (short term) | Cover Letter(s) | 2014-06-20 | PDF 45.3 KB |
| Cover Letter_Request Modular Approval | Cover Letter(s) | 2014-06-20 | PDF 85.5 KB |
| mpe report - v1140-103-1 | RF Exposure Info | 2016-05-23 | PDF 1.4 MB |
| 6_RF Exposure Info.pdf | RF Exposure Info | 2015-05-07 | PDF 1,020.3 KB |
| RF Exposure report | RF Exposure Info | 2014-06-20 | PDF 2.1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 165.2 KB | |
| block-diagram_v1140-103-1_v3 Metadata only | Block Diagram | PDF 20.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.7 MB | |
| schematics_v1140-103-1 Metadata only | Schematics | PDF 3.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 281.1 KB | |
| datenblatt-34105-us-4g_operational description Metadata only | Operational Description | PDF 1.2 MB | |
| datenblatt-64150-ece-3g_operational description Metadata only | Operational Description | PDF 1.1 MB | |
| datenblatt-64159-ece-4g_operational description Metadata only | Operational Description | PDF 1.4 MB | |
| datenblatt_ksv_920325102_operational description Metadata only | Operational Description | PDF 317.3 KB | |
| v1140-103-1_product description_v2 Metadata only | Operational Description | PDF 376.2 KB | |
| 4_Parts List.pdf Metadata only | Parts List/Tune Up Info | PDF 77.5 KB | |
| 5_Tune_Up_Information.pdf Metadata only | Parts List/Tune Up Info | PDF 149.3 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 40.8 KB | |
| Tune_Up_Information_rev1.0 Metadata only | Parts List/Tune Up Info | PDF 149.3 KB | |
| partlist_v1140-103-1 Metadata only | Parts List/Tune Up Info | PDF 45.5 KB |
Application Information
| Application ID | HzkfZQAPiGT+Ky82SdgN0w== |
|---|---|
| Final Action Date | 2016-05-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009359555 |
| Model | V1140-103 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | GSM/GRPRS/UMTS/HSDPA/HSUPA Module |
| Responsible Party | Marco Okhovat-Esfehani, Mr., marco.okhovat-esfehani@valeo.com  , 0049 6172 767 |
| Test Firm | Niels Jess, CETECOM GmbH, niels.jess@cetecom.com  , +49 2054 9519 603 |
| TCB Email | tcb@cetecom.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change Filing. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 0.77 dBd at 850 MHz and 2.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| HzkfZQAPiGT+Ky82SdgN0w== | 2016-05-23 | Class II permissive change or modification of presently authorized equipment |
| gHLAinUAVIkUoEOqGNxZYA== | 2015-05-07 | Class II permissive change or modification of presently authorized equipment |
| xr6Qp+LHvJtYY1qTZTgrUQ== | 2014-06-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xr6Qp+LHvJtYY1qTZTgrUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/20/2014 Application Dated: 06/18/2014 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA/LTE Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz and 3.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
EAS Grant - Application xr6Qp+LHvJtYY1qTZTgrUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 06/20/2014 Application Dated: 06/18/2014 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA/LTE Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz and 3.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 05/23/2016 Application Dated: 05/23/2016 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GRPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Class II Permissive Change Filing. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 0.77 dBd at 850 MHz and 2.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
EAS Grant - Application HzkfZQAPiGT+Ky82SdgN0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 05/23/2016 Application Dated: 05/23/2016 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GRPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Class II Permissive Change Filing. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 0.77 dBd at 850 MHz and 2.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 05/07/2015 Application Dated: 05/07/2015 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 4M17F9W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted. Class II Permissive Change to add mobile/fixed host as documented in this filing. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz and 7.01 dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
EAS Grant - Application gHLAinUAVIkUoEOqGNxZYA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 05/07/2015 Application Dated: 05/07/2015 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-103 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 4M17F9W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted. Class II Permissive Change to add mobile/fixed host as documented in this filing. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz and 7.01 dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
| Mail To: |