FCC ID QWY-V1140-105
GSM/GPRS/UMTS/HSDPA/HSUPA Module
by VALEO Telematik und Akustik GmbH
Grantee Code: QWY Product Code: V1140105
Latest application date: 2015-05-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2015-05-02 |
| 824.2-848.8 MHz | Original Equipment | 2014-06-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| UserManual_v09 | Users Manual | 2014-12-27 | PDF 1.2 MB |
| Internal photos | Internal Photos | 2015-05-02 | PDF 355.7 KB |
| Internal photos | Internal Photos | 2014-12-27 | PDF 1.7 MB |
| External photos | External Photos | 2015-05-02 | PDF 355.6 KB |
| External photos | External Photos | 2014-12-27 | PDF 3.7 MB |
| External photos_Annex Test report | External Photos | 2014-12-27 | PDF 1.1 MB |
| External photos_RF Exposure | External Photos | 2014-12-27 | PDF 539.8 KB |
| Label and Label Location | ID Label/Location Info | 2014-06-30 | PDF 142.4 KB |
| Test setup photos | Test Setup Photos | 2015-05-02 | PDF 444.4 KB |
| Test setup photos | Test Setup Photos | 2014-12-27 | PDF 727 KB |
| Test report | Test Report | 2015-05-02 | PDF 956.7 KB |
| Test report_plots | Test Report | 2015-05-02 | PDF 387.2 KB |
| Test report_Delta _WCDMA_Annex | Test Report | 2014-06-30 | PDF 482.5 KB |
| Test report_Delta_WCDMA | Test Report | 2014-06-30 | PDF 1.2 MB |
| Test report_GSM_Annex_V1140-103 | Test Report | 2014-06-30 | PDF 2.1 MB |
| Test report_GSM_V1140-103 | Test Report | 2014-06-30 | PDF 1.4 MB |
| Test report_WCDMA_Annex_V1140-103 | Test Report | 2014-06-30 | PDF 1.2 MB |
| Test report_WCDMA_V1140-103 | Test Report | 2014-06-30 | PDF 1.4 MB |
| Cover Letter - Class II permissive change request | Cover Letter(s) | 2015-05-02 | PDF 51.2 KB |
| Cover Letter_Authorization-Letter | Cover Letter(s) | 2015-05-02 | PDF 36 KB |
| Cover Letter_Confidentiality Request Letter (permanent) | Cover Letter(s) | 2015-05-02 | PDF 43.4 KB |
| Cover Letter_V1140-10x_Memory_Change_V03 | Cover Letter(s) | 2015-05-02 | PDF 547.8 KB |
| Cover Letter_V1140-10x_Shielding_Change_V03 | Cover Letter(s) | 2015-05-02 | PDF 560.7 KB |
| Cover Letter_Confidentiality Request Letter (short term) | Cover Letter(s) | 2014-06-30 | PDF 44.9 KB |
| Cover Letter_Declaration Of Changes_103vs105 | Cover Letter(s) | 2014-06-30 | PDF 158.6 KB |
| Cover Letter_Modular-Approval-Statement_V1140-105 | Cover Letter(s) | 2014-06-30 | PDF 89.7 KB |
| RF Exposure | RF Exposure Info | 2015-05-02 | PDF 1,021.7 KB |
| RF Exposure | RF Exposure Info | 2014-06-30 | PDF 1.3 MB |
| Block Diagram Metadata only | Block Diagram | PDF 214.1 KB | |
| Schematics Metadata only | Schematics | PDF 3.3 MB | |
| Product Description Metadata only | Operational Description | PDF 446.6 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 77.9 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 42.1 KB | |
| Tune Up Information Metadata only | Parts List/Tune Up Info | PDF 149.3 KB | |
| Tune_Up_Information_rev1.0 Metadata only | Parts List/Tune Up Info | PDF 149.3 KB |
Application Information
| Application ID | vYR2GYruZLJ92ILw074Ukw== |
|---|---|
| Final Action Date | 2015-05-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009359555 |
| Model | V1140-105 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Responsible Party | Marco Okhovat-Esfehani, Mr., marco.okhovat-esfehani@valeo.com  , 0049 6172 767 |
| Test Firm | Niels Jess, CETECOM GmbH, niels.jess@cetecom.com  , +49 2054 9519 603 |
| TCB Email | tcb@cetecom.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz and 7.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vYR2GYruZLJ92ILw074Ukw== | 2015-05-02 | Class II permissive change or modification of presently authorized equipment |
| wHWC4dxIy2iLrS3MziB+fw== | 2014-06-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wHWC4dxIy2iLrS3MziB+fw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 06/30/2014 Application Dated: 06/30/2014 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-105 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz and 3.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
EAS Grant - Application wHWC4dxIy2iLrS3MziB+fw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 06/30/2014 Application Dated: 06/30/2014 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-105 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Output power listed is conducted This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 1.47 dBd at 850 MHz and 3.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 05/02/2015 Application Dated: 05/02/2015 |
| VALEO Telematik und Akustik GmbH |
| Max-Planck-Str. 28-32 |
| Friedrichsdorf, 61381 Germany |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-105 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz and 7.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
EAS Grant - Application vYR2GYruZLJ92ILw074Ukw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
VALEO Telematik und Akustik GmbH Max-Planck-Str. 28-32 Friedrichsdorf, 61381 Germany |
Date of Grant: 05/02/2015 Application Dated: 05/02/2015 |
| Attention: Marco Okhovat-Esfehani , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QWY-V1140-105 |
| Name of Grantee: | VALEO Telematik und Akustik GmbH |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSDPA/HSUPA Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.86 | 0.02 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 0.49 | 0.02 PM | 245KG7W | |
| 22H | 826.4 - 846.6 | 0.23 | 0.01 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 0.91 | 0.01 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.38 | 0.03 PM | 245KG7W | |
| 24E | 1852.4 - 1907.6 | 0.23 | 0.01 PM | 4M17F9W |
| Class II Permissive Change. Output power listed is conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations as documented in this filing the antenna gain, including cable loss, must not exceed 3.57 dBd at 850 MHz and 7.01dBi at 1900 MHz for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H, 24E. This device is limited to 3.8V DC supply only. The final product operating with this transmitter must include operating instructions and antenna installation instructions for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use |
| Mail To: |