FCC ID QXO-AP302W

Access Point

by Extreme Networks, Inc.

Grantee Code: QXO   Product Code: AP302W
Latest application date: 2020-12-07

FCC ID Device Details

FCC IDQXO-AP302W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQXO
Product CodeAP302W
Applicant BusinessExtreme Networks, Inc. 🇺🇸
Related Domains extremenetworks.com
Equipment ClassAccess Point
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-07
2402-2480 MHzOriginal Equipment2020-11-20
5180-5240 MHzOriginal Equipment2020-11-20

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-05-19PDF 197.2 KB
Internal PhotosInternal Photos2021-05-19PDF 2.1 MB
External PhotosExternal Photos2021-05-19PDF 487 KB
Label InfoID Label/Location Info2020-11-20PDF 66.1 KB
Label infoID Label/Location Info2020-11-20PDF 66.1 KB
Test Setup Photos DFSTest Setup Photos2021-06-05PDF 87.1 KB
Test Setup Photos RFTest Setup Photos2021-06-05PDF 96.2 KB
Tsup 2.4GTest Setup Photos2021-05-19PDF 302.3 KB
Tsup 5GTest Setup Photos2021-05-19PDF 302.3 KB
Tsup_802.15.4Test Setup Photos2021-05-19PDF 246.9 KB
Tsup_BT5.0Test Setup Photos2021-05-19PDF 302.3 KB
Test Report DFSTest Report2020-12-07PDF 1 MB
Test Report RF pt 1Test Report2020-12-07PDF 5.8 MB
Test Report RF pt 2Test Report2020-12-07PDF 3.7 MB
Test Report 2.4GTest Report2020-11-20PDF 4.7 MB
Test Report 5G pt 1Test Report2020-11-20PDF 5.8 MB
Test Report 5G pt 2Test Report2020-11-20PDF 2.5 MB
Test Report_802.15.4Test Report2020-11-20PDF 843.7 KB
Test Report_BT5.0Test Report2020-11-20PDF 1.1 MB
SDoC Attestation LetterAttestation Statements2020-11-20PDF 38.6 KB
C2PC Cover LetterCover Letter(s)2020-12-07PDF 39.4 KB
Confidentiality LetterCover Letter(s)2020-12-07PDF 45.6 KB
POA LetterCover Letter(s)2020-12-07PDF 39.4 KB
TPC Declaration LetterCover Letter(s)2020-12-07PDF 41.8 KB
Confidentiality LetterCover Letter(s)2020-11-20PDF 46.2 KB
POA LetterCover Letter(s)2020-11-20PDF 39.5 KB
Prof Install LetterCover Letter(s)2020-11-20PDF 42.4 KB
Prof Install letterCover Letter(s)2020-11-20PDF 42.4 KB
MPE ReportRF Exposure Info2020-12-07PDF 131 KB
MPE ReportRF Exposure Info2020-11-20PDF 220.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 250.6 KB
Schematics Metadata onlySchematicsPDF 628.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 51.6 KB
SW Op Desc Metadata onlySDR Software/Security InfPDF 45.1 KB
SW Op Desc Metadata onlySDR Software/Security InfPDF 45.4 KB

Application Information

Application IDjcphdc6CAq5d5cc/zgOiZA==
Final Action Date2020-12-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019588359
ModelAP302W
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Point
Responsible PartyThomas Whissel, Regulatory Compliance Manager, whissel@Extremenetworks.com , +1-603-952-5861
Test FirmAlex CHEN, Sporton International Inc., alex@sporton.com.tw , +886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/05/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsC2PC: Adding U-NII-2A, U-NII-2C with TDWR. Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
jcphdc6CAq5d5cc/zgOiZA==2020-12-07Class II permissive change or modification of presently authorized equipment
YwND7mTSGRiRMDRHkhIAAg==2020-11-20Original Equipment
4XdUSKT7KtaiWPG0R+aHFQ==2020-11-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00215CCC
2405-2480 MHz0.00215CCC
2412-2462 MHz0.45615CCC, MO
5180-5240 MHz0.28215ECC, MO
5260-5320 MHz0.16415ECC, MO
5500-5720 MHz0.21215ECC, MO
5745-5825 MHz0.38715ECC, MO

Grants

TCB Grant - Application YwND7mTSGRiRMDRHkhIAAg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/20/2020

Application Dated: 11/19/2020
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.456  
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2405.0  -  2480.0 0.002  

Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YwND7mTSGRiRMDRHkhIAAg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 11/20/2020

Application Dated: 11/19/2020
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.456  
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2405.0  -  2480.0 0.002  

Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jcphdc6CAq5d5cc/zgOiZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/07/2020

Application Dated: 12/01/2020
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.282  
CC MO 15E 5260.0  -  5320.0 0.164  
CC MO 15E 5500.0  -  5720.0 0.212  
CC MO 15E 5745.0  -  5825.0 0.387  

C2PC: Adding U-NII-2A, U-NII-2C with TDWR. Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jcphdc6CAq5d5cc/zgOiZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 12/07/2020

Application Dated: 12/01/2020
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.282  
CC MO 15E 5260.0  -  5320.0 0.164  
CC MO 15E 5500.0  -  5720.0 0.212  
CC MO 15E 5745.0  -  5825.0 0.387  

C2PC: Adding U-NII-2A, U-NII-2C with TDWR. Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4XdUSKT7KtaiWPG0R+aHFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/20/2020

Application Dated: 11/19/2020
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.282  
CC MO 15E 5745.0  -  5825.0 0.387  

Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4XdUSKT7KtaiWPG0R+aHFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 11/20/2020

Application Dated: 11/19/2020
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP302W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.282  
CC MO 15E 5745.0  -  5825.0 0.387  

Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 23cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: