FCC ID QXO-AP4000

Access Point

by Extreme Networks, Inc.

Grantee Code: QXO   Product Code: AP4000
Latest application date: 2026-07-07

FCC ID Device Details

FCC IDQXO-AP4000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQXO
Product CodeAP4000
Applicant BusinessExtreme Networks, Inc. 🇺🇸
Related Domains extremenetworks.com
Equipment ClassAccess Point
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
6535-6855 MHzOriginal Equipment2026-07-07
5180-5250 MHzClass II permissive change or modification of presently authorized equipment2021-12-15
5180-5240 MHzOriginal Equipment2021-11-25
5955-7095 MHzOriginal Equipment2021-11-25
2402-2480 MHzOriginal Equipment2021-11-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-05-24PDF 393 KB
Internal PhotoInternal Photos2022-05-24PDF 3.5 MB
External PhotoExternal Photos2022-05-24PDF 510.7 KB
Label LocationID Label/Location Info2026-07-07PDF 55.7 KB
Label LocationID Label/Location Info2021-11-25PDF 55.7 KB
DFS Test PhotoTest Setup Photos2022-06-12PDF 313 KB
RF Test PhotosTest Setup Photos2022-06-12PDF 1.2 MB
Test Photo 2.4GTest Setup Photos2022-05-24PDF 1 MB
Test Photo 5GTest Setup Photos2022-05-24PDF 961.5 KB
Test Photo 6ETest Setup Photos2022-05-24PDF 1 MB
Test Photo 802.15.4Test Setup Photos2022-05-24PDF 248.5 KB
Test Photo BT4.0Test Setup Photos2022-05-24PDF 248.4 KB
Antenna ReportTest Report2026-07-07PDF 350.1 KB
Test Report 6E pt. 1Test Report2026-07-07PDF 5.5 MB
Test Report 6E pt. 2Test Report2026-07-07PDF 5.8 MB
Test Report 6E pt. 3Test Report2026-07-07PDF 5.4 MB
Test Report 6E pt. 4Test Report2026-07-07PDF 663.4 KB
Test Report 6SD pt. 1Test Report2026-07-07PDF 5.3 MB
Test Report 6SD pt. 2Test Report2026-07-07PDF 808.1 KB
Test Report AFCTest Report2026-07-07PDF 1.6 MB
DFS Test ReportTest Report2021-12-15PDF 1.7 MB
MPE Test ReportRF Exposure Info2021-12-15PDF 288.1 KB
RF Test Report part1Test Report2021-12-15PDF 5 MB
RF Test Report part2Test Report2021-12-15PDF 4.5 MB
MPE Test ReportRF Exposure Info2021-11-25PDF 288 KB
RF Test Report 2.4GTest Report2021-11-25PDF 5.5 MB
RF Test Report 5GTest Report2021-11-25PDF 5.6 MB
RF Test Report 6E part 1Test Report2021-11-25PDF 5.8 MB
RF Test Report 6E part 2Test Report2021-11-25PDF 5.8 MB
RF Test Report 6E part 3Test Report2021-11-25PDF 5.7 MB
RF Test Report 6E part 4Test Report2021-11-25PDF 717.1 KB
RF Test Report 802.15.4Test Report2021-11-25PDF 876.2 KB
RF Test Report BT4.0Test Report2021-11-25PDF 1.1 MB
Att Statement 2.911(d)(7)Attestation Statements2026-07-07PDF 153.5 KB
Att Statements 2.911(d)(5)(i)&(ii)Attestation Statements2026-07-07PDF 125 KB
SDoC Attestation LetterAttestation Statements2021-11-25PDF 59.8 KB
C2PC LetterCover Letter(s)2026-07-07PDF 96.6 KB
Confidentiality LetterCover Letter(s)2026-07-07PDF 125.4 KB
Declaration LetterCover Letter(s)2026-07-07PDF 124.5 KB
POA LetterCover Letter(s)2026-07-07PDF 96.8 KB
Class II Change LetterCover Letter(s)2021-12-15PDF 87.6 KB
Confidential LetterCover Letter(s)2021-12-15PDF 113.5 KB
POACover Letter(s)2021-12-15PDF 84.7 KB
Pro Installation LetterCover Letter(s)2021-12-15PDF 109.9 KB
TPC Declaration LetterCover Letter(s)2021-12-15PDF 109.7 KB
Confidential LetterCover Letter(s)2021-11-25PDF 151.9 KB
Dec on indoor access point operationCover Letter(s)2021-11-25PDF 85.6 KB
POACover Letter(s)2021-11-25PDF 59.7 KB
Professional Installation DecCover Letter(s)2021-11-25PDF 83.6 KB
RF Exposure MPERF Exposure Info2026-07-07PDF 504.6 KB
UM Installation Metadata onlyUsers Manual2027-01-03PDF 2 MB
User Manual Metadata onlyUsers Manual2027-01-03PDF 1 MB
Internal Photos Metadata onlyInternal Photos2027-01-03PDF 3.5 MB
External Photos Metadata onlyExternal Photos2027-01-03PDF 510.8 KB
OpDes Part A Geoloc. General Description Metadata onlyOperational Description2027-01-03PDF 75.4 KB
OpDes Part B Geoloc. General Description Metadata onlyOperational Description2027-01-03PDF 43.9 KB
TSUP 6E Metadata onlyTest Setup Photos2027-01-03PDF 1 MB
TSUP 6SD Metadata onlyTest Setup Photos2027-01-03PDF 439.7 KB
TSUP Antenna Metadata onlyTest Setup Photos2027-01-03PDF 87.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 79 KB
Block Diagram Metadata onlyBlock DiagramPDF 79 KB
Schematics Metadata onlySchematicsPDF 668.5 KB
Schematics Metadata onlySchematicsPDF 668.5 KB
Op Description Antenna Report Metadata onlyOperational DescriptionPDF 421.8 KB
Op Description Antenna Report Metadata onlyOperational DescriptionPDF 472.9 KB
OpDes Part A Acceptance Letter Metadata onlyOperational DescriptionPDF 235.8 KB
OpDes Part A Geoloc. Justification Report Metadata onlyOperational DescriptionPDF 1.2 MB
OpDes Part A Inquiry Submission Metadata onlyOperational DescriptionPDF 440.9 KB
OpDes Part B Acceptance Letter Metadata onlyOperational DescriptionPDF 214.7 KB
OpDes Part B Geoloc. Justificaiton Report Metadata onlyOperational DescriptionPDF 495.7 KB
OpDes Part B Inquiry Submission Metadata onlyOperational DescriptionPDF 274.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 65.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 65.1 KB
Operational Description KDB Inquiry Metadata onlyOperational DescriptionPDF 100.2 KB
Operational Description PAG Inquiry Metadata onlyOperational DescriptionPDF 995.5 KB
PAG Inquiry_6GHz radiation EIRP Metadata onlyOperational DescriptionPDF 1.1 MB
Op Description SW Security Metadata onlySDR Software/Security InfPDF 42.7 KB
OpDes Software Security Metadata onlySDR Software/Security Info.PDF 128.8 KB
Software Security Op Description Metadata onlySDR Software/Security InfPDF 128.8 KB

Application Information

Application IDN4EjMMZjdt905Zve7PEjhg==
Final Action Date2026-07-07
Application PurposeOriginal Equipment
Applicant FRN0019588359
ModelAP4000
Frequency Range6535-6855 MHz
Equipment Class6SD - 15E 6 GHz Standard Power Access Point
Device DescriptionAccess Point
Responsible PartyJohn Ballew, jballew@Extremenetworks.com , +1-603-952-5862
Non-Technical ContactJohn Ballew, Extreme Networks, Inc., jballew@Extremenetworks.com , +1-603-952-5862
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , 886-3-327-3456
TCB Emailcb@industrial-ia.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes

Applications

Application IDDatePurpose
N4EjMMZjdt905Zve7PEjhg==2026-07-07Original Equipment
a0BltCoZuCWhpLIL1jgqzg==2021-12-15Class II permissive change or modification of presently authorized equipment
mC06xiE/xVx7NSwBrBzNcg==2021-11-25Original Equipment
My7giaUHrzoTGlPLw/sI8w==2021-11-25Original Equipment
DVEg/kBIa4ArzcPYTSw8wg==2021-11-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00315CCC
2405-2480 MHz0.00315CCC
2412-2462 MHz0.55715CCC, MO
5180-5250 MHz0.54815ECC, MO
5180-5240 MHz0.54815ECC, MO
5250-5320 MHz0.24915ECC, MO, ND
5500-5720 MHz0.24915ECC, MO, ND
5745-5825 MHz0.89115ECC, MO
5955-7095 MHz0.430000015ECC, EP, MO

Grants

TCB Grant - Application N4EjMMZjdt905Zve7PEjhg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 07/07/2026

Application Dated: 07/01/2026
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: 15E 6 GHz Standard Power Access Point
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BX CC EP MO 15E 5955.0  -  6415.0 1.875  
BX CC EP MO 15E 6535.0  -  6855.0 2.094  

Power listed is EIRP. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. This device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device is intended for indoor use only.

BX: This standard power access point is authorized as a composite under 47 CFR 15.407(a)(4) and an indoor access point under 47 CFR 15.407(a)(5), allowing the AFCs that are issued waiver FCC 24-1217 to consider up to 6 dB of building entry loss (BEL).
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application My7giaUHrzoTGlPLw/sI8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/25/2021

Application Dated: 09/13/2021
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.43  

Power listed is EIRP. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application My7giaUHrzoTGlPLw/sI8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 11/25/2021

Application Dated: 09/13/2021
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.43  

Power listed is EIRP. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, and 160 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mC06xiE/xVx7NSwBrBzNcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/25/2021

Application Dated: 09/13/2021
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.548  
CC MO 15E 5745.0  -  5825.0 0.891  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application mC06xiE/xVx7NSwBrBzNcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 11/25/2021

Application Dated: 09/13/2021
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.548  
CC MO 15E 5745.0  -  5825.0 0.891  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application DVEg/kBIa4ArzcPYTSw8wg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/25/2021

Application Dated: 09/13/2021
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.557  
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2405.0  -  2480.0 0.003  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application DVEg/kBIa4ArzcPYTSw8wg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 11/25/2021

Application Dated: 09/13/2021
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.557  
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2405.0  -  2480.0 0.003  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application a0BltCoZuCWhpLIL1jgqzg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/15/2021

Application Dated: 12/03/2021
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.548  
CC MO ND 15E 5250.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.249  
CC MO 15E 5745.0  -  5825.0 0.891  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes.

Class II Permissive Change: Adds master mode operation in U-NII bands 2A and 2C. Adds 160 MHz operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application a0BltCoZuCWhpLIL1jgqzg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 12/15/2021

Application Dated: 12/03/2021
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP4000
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.548  
CC MO ND 15E 5250.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.249  
CC MO 15E 5745.0  -  5825.0 0.891  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes.

Class II Permissive Change: Adds master mode operation in U-NII bands 2A and 2C. Adds 160 MHz operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: