FCC ID QXO-AP460C
Wireless Access Point
by Extreme Networks, Inc.
Grantee Code: QXO Product Code: AP460C
Latest application date: 2021-07-22
FCC ID Device Details
| FCC ID | QXO-AP460C |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QXO |
| Product Code | AP460C |
| Applicant Business | Extreme Networks, Inc. 🇺🇸 |
| Related Domains |  extremenetworks.com |
| Equipment Class | Wireless Access Point |
| Test Firm | Sporton International Inc. Hsinchu Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-07-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-07-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-06-18 |
| 2402-2480 MHz | Original Equipment | 2020-04-22 |
| 5180-5240 MHz | Original Equipment | 2020-04-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2020-06-18 | PDF 2 MB |
| Users Manual Metadata only | Users Manual | 2020-04-22 | PDF 975.6 KB |
| Users Manual_revised0417 | Users Manual | 2020-04-22 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2020-04-22 | PDF 320.4 KB |
| External Photo | External Photos | 2020-06-18 | PDF 84.5 KB |
| External Photos | External Photos | 2020-04-22 | PDF 84.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2020-04-22 | PDF 508.5 KB |
| Test Setup Photos 2.4G | Test Setup Photos | 2021-07-22 | PDF 554 KB |
| Test Setup Photos 5G | Test Setup Photos | 2021-07-22 | PDF 410.6 KB |
| Test Setup Photos | Test Setup Photos | 2020-06-18 | PDF 153.9 KB |
| Test Setup Photos | Test Setup Photos | 2020-04-22 | PDF 123.1 KB |
| RF Test Report 2.4G | Test Report | 2021-07-22 | PDF 5.3 MB |
| RF Test Report 5G Part 1 | Test Report | 2021-07-22 | PDF 5.9 MB |
| RF Test Report 5G Part 2 | Test Report | 2021-07-22 | PDF 5.8 MB |
| RF Test Report 5G Part 3 | Test Report | 2021-07-22 | PDF 5.8 MB |
| RF Test Report 5G Part 4 | Test Report | 2021-07-22 | PDF 5.8 MB |
| RF Test Report 5G Part 5 | Test Report | 2021-07-22 | PDF 1.9 MB |
| Test Report_DFS | Test Report | 2020-06-18 | PDF 3.8 MB |
| Test Report_NII_Appendix 3_Part 1 | Test Report | 2020-06-18 | PDF 4.1 MB |
| Test Report_NII_Appendix 3_Part 10 | Test Report | 2020-06-18 | PDF 4.2 MB |
| Test Report_NII_Appendix 3_Part 2 | Test Report | 2020-06-18 | PDF 4.4 MB |
| Test Report_NII_Appendix 3_Part 3 | Test Report | 2020-06-18 | PDF 4.3 MB |
| Test Report_NII_Appendix 3_Part 4 | Test Report | 2020-06-18 | PDF 3.5 MB |
| Test Report_NII_Appendix 3_Part 5 | Test Report | 2020-06-18 | PDF 4.6 MB |
| Test Report_NII_Appendix 3_Part 6 | Test Report | 2020-06-18 | PDF 4.6 MB |
| Test Report_NII_Appendix 3_Part 7 | Test Report | 2020-06-18 | PDF 4.6 MB |
| Test Report_NII_Appendix 3_Part 8 | Test Report | 2020-06-18 | PDF 4.6 MB |
| Test Report_NII_Appendix 3_Part 9 | Test Report | 2020-06-18 | PDF 4.6 MB |
| Test Report_NII_Appendix 4 | Test Report | 2020-06-18 | PDF 799.5 KB |
| Test Report_NII_Appendix 5 | Test Report | 2020-06-18 | PDF 72.2 KB |
| Test Report__NII_Part 1 | Test Report | 2020-06-18 | PDF 4.4 MB |
| Test Report__NII_Part 2 | Test Report | 2020-06-18 | PDF 1.7 MB |
| Appendix 1 2.4GHz Radiated spurious emission | Test Report | 2020-04-22 | PDF 1.9 MB |
| Appendix 2 2.4GHz FCC RF output power | Test Report | 2020-04-22 | PDF 53.7 KB |
| Appendix 3 5GHz Radiated spurious emission-part1 | Test Report | 2020-04-22 | PDF 4.1 MB |
| Appendix 3 5GHz Radiated spurious emission-part2 | Test Report | 2020-04-22 | PDF 4.4 MB |
| Appendix 3 5GHz Radiated spurious emission-part3 | Test Report | 2020-04-22 | PDF 4.3 MB |
| Appendix 3 5GHz Radiated spurious emission-part4 | Test Report | 2020-04-22 | PDF 3.5 MB |
| Appendix 4 5GHz FCC RF output power-Part1 | Test Report | 2020-04-22 | PDF 249.4 KB |
| Appendix 4 5GHz FCC RF output power-Part2 | Test Report | 2020-04-22 | PDF 87.6 KB |
| Appendix 5 5.15-5.25GHz above 30 antenna gain | Test Report | 2020-04-22 | PDF 62.5 KB |
| Test Report | Test Report | 2020-04-22 | PDF 3.7 MB |
| Test Report_BLE | Test Report | 2020-04-22 | PDF 1.3 MB |
| Test Report_WLAN | Test Report | 2020-04-22 | PDF 3.7 MB |
| C2PC Letter | Cover Letter(s) | 2021-07-22 | PDF 156.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-07-22 | PDF 180 KB |
| POA Letter | Cover Letter(s) | 2021-07-22 | PDF 153.8 KB |
| Confidentiality | Cover Letter(s) | 2020-06-18 | PDF 468.8 KB |
| FCC C2PC Change Letter | Cover Letter(s) | 2020-06-18 | PDF 195 KB |
| FCC Expedited Review Letter | Cover Letter(s) | 2020-06-18 | PDF 313.4 KB |
| Professional Install | Cover Letter(s) | 2020-06-18 | PDF 479.7 KB |
| Confidentiality | Cover Letter(s) | 2020-04-22 | PDF 349.5 KB |
| Declaration of authorization | Cover Letter(s) | 2020-04-22 | PDF 401.4 KB |
| Non-SDR-Statement | Cover Letter(s) | 2020-04-22 | PDF 398.2 KB |
| Professional Install Declaration | Cover Letter(s) | 2020-04-22 | PDF 485.5 KB |
| MPE | RF Exposure Info | 2020-06-18 | PDF 69.3 KB |
| FCC-RF Exposure | RF Exposure Info | 2020-04-22 | PDF 69.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 76.5 KB | |
| Schematics Metadata only | Schematics | PDF 783.7 KB | |
| Antenna Report Metadata only | Operational Description | PDF 690.6 KB | |
| Operation Description PAG Inquiry Metadata only | Operational Description | PDF 995.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 840.4 KB | |
| Operational Description PAG Inquiry Metadata only | Operational Description | PDF 995.6 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 320.7 KB | |
| Software Security Info Metadata only | Operational Description | PDF 320.7 KB | |
| Operation Description Software Security Metadata only | SDR Software/Security Inf | PDF 284.7 KB |
Application Information
| Application ID | eITnHCvWE48A+vdEW95fmA== |
|---|---|
| Final Action Date | 2021-07-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019588359 |
| Model | AP460C |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Access Point |
| Responsible Party | Thomas Whissel, Regulatory Compliance Manager, whissel@Extremenetworks.com , +1-603-952-5861 |
| Test Firm | Alex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw  , +886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change: Only firmware is modified to add 2.4G 40MHz mode. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eITnHCvWE48A+vdEW95fmA== | 2021-07-22 | Class II permissive change or modification of presently authorized equipment |
| CnLZ6tkE8b3QyoiXkBomMg== | 2021-07-22 | Class II permissive change or modification of presently authorized equipment |
| R3JnB4I0oZIs9NonO6NJ5Q== | 2020-06-18 | Class II permissive change or modification of presently authorized equipment |
| ylfdAav08k1DA5cfmpQVfg== | 2020-04-22 | Original Equipment |
| Y475DK6V7e+YCTQkmnFTkw== | 2020-04-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ylfdAav08k1DA5cfmpQVfg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/22/2020 Application Dated: 04/15/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0043 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3 |
| Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ylfdAav08k1DA5cfmpQVfg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 04/22/2020 Application Dated: 04/15/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0043 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3 |
| Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/22/2020 Application Dated: 04/15/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Y475DK6V7e+YCTQkmnFTkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 04/22/2020 Application Dated: 04/15/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/18/2020 Application Dated: 06/12/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.12 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| C2PC : Open DFS bands by software. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz 5290MHz 5530MHz 5610MHz 5690MHz and 5775 MHz. The 160 MHz mode is limited to channel at 5250MHz and 5570 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application R3JnB4I0oZIs9NonO6NJ5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 06/18/2020 Application Dated: 06/12/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.12 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| C2PC : Open DFS bands by software. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz 5290MHz 5530MHz 5610MHz 5690MHz and 5775 MHz. The 160 MHz mode is limited to channel at 5250MHz and 5570 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/22/2021 Application Dated: 07/16/2021 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0043 |
| Class II Permissive Change: Only firmware is modified to add 2.4G 40MHz mode. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application eITnHCvWE48A+vdEW95fmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 07/22/2021 Application Dated: 07/16/2021 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0043 |
| Class II Permissive Change: Only firmware is modified to add 2.4G 40MHz mode. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/22/2021 Application Dated: 07/16/2021 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.12 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| Class II Permissive Change: Only firmware is modified to add 2.4G 40MHz mode. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz 5290MHz 5530MHz 5610MHz 5690MHz and 5775 MHz. The 160 MHz mode is limited to channel at 5250MHz and 5570 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CnLZ6tkE8b3QyoiXkBomMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 07/22/2021 Application Dated: 07/16/2021 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP460C |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.12 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.12 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.12 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.88 |
| Class II Permissive Change: Only firmware is modified to add 2.4G 40MHz mode. Power output listed is conducted. This device must be installed by a professional installer who is certified to install it and to ensure that they are properly grounded and meet applicable local and national electrical codes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz 5290MHz 5530MHz 5610MHz 5690MHz and 5775 MHz. The 160 MHz mode is limited to channel at 5250MHz and 5570 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |