FCC ID QXO-AP5010U

Access Point

by Extreme Networks, Inc.

Grantee Code: QXO   Product Code: AP5010U
Latest application date: 2022-11-10

FCC ID Device Details

FCC IDQXO-AP5010U
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQXO
Product CodeAP5010U
Applicant BusinessExtreme Networks, Inc. 🇺🇸
Related Domains extremenetworks.com
Equipment ClassAccess Point
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5250 MHzClass II permissive change or modification of presently authorized equipment2022-11-10
6489.6-7987.2 MHzOriginal Equipment2022-09-27
5745-5825 MHzOriginal Equipment2022-09-27
2412-2462 MHzOriginal Equipment2022-09-27
5955-7095 MHzOriginal Equipment2022-09-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-03-26PDF 447.3 KB
Internal Photos Part 1Internal Photos2023-03-26PDF 5.4 MB
Internal Photos Part 2Internal Photos2023-03-26PDF 2.1 MB
External PhotosExternal Photos2023-03-26PDF 545.5 KB
Label LocationID Label/Location Info2022-09-27PDF 150.4 KB
Antenna Test PhotosTest Setup Photos2023-05-09PDF 774.5 KB
Antenna Test Photos Scanning RadioTest Setup Photos2023-05-09PDF 609.5 KB
DFS Test PhotosTest Setup Photos2023-05-09PDF 169 KB
RF Test PhotosTest Setup Photos2023-05-09PDF 530.5 KB
TSUP 802.15.4Test Setup Photos2023-03-26PDF 462.8 KB
TSUP AntennaTest Setup Photos2023-03-26PDF 774.5 KB
TSUP BT 5.0Test Setup Photos2023-03-26PDF 463.8 KB
TSUP UWBTest Setup Photos2023-03-26PDF 686.1 KB
TSUP WLAN 2.4GHzTest Setup Photos2023-03-26PDF 630.7 KB
TSUP WLAN 5GHzTest Setup Photos2023-03-26PDF 799 KB
TSUP WLAN 6ETest Setup Photos2023-03-26PDF 463.6 KB
AntennaTest Report2022-11-10PDF 2.6 MB
Antenna Scanning RadioTest Report2022-11-10PDF 2.2 MB
DFS Test ReportTest Report2022-11-10PDF 4.1 MB
RF Test Report part1Test Report2022-11-10PDF 5 MB
RF Test Report part2Test Report2022-11-10PDF 5.4 MB
RF Test Report part3Test Report2022-11-10PDF 5.2 MB
Test Report 802.15.4Test Report2022-09-27PDF 1 MB
Test Report AntennaTest Report2022-09-27PDF 2.6 MB
Test Report BT 5.0Test Report2022-09-27PDF 1.3 MB
Test Report UWBTest Report2022-09-27PDF 1.8 MB
Test Report WLAN 2.4GHz Part 1Test Report2022-09-27PDF 4.9 MB
Test Report WLAN 2.4GHz Part 2Test Report2022-09-27PDF 1.1 MB
Test Report WLAN 5GHz Part 1Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 5GHz Part 2Test Report2022-09-27PDF 4.8 MB
Test Report WLAN 6E Part 1Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 10Test Report2022-09-27PDF 5 MB
Test Report WLAN 6E Part 2Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 3Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 4Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 5Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 6Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 7Test Report2022-09-27PDF 5.3 MB
Test Report WLAN 6E Part 8Test Report2022-09-27PDF 5.4 MB
Test Report WLAN 6E Part 9Test Report2022-09-27PDF 5.4 MB
Dec Letter of Operation 6IDAttestation Statements2022-09-27PDF 114.8 KB
C2PC LetterCover Letter(s)2022-11-10PDF 146.5 KB
Confidentiality RequestCover Letter(s)2022-11-10PDF 187.4 KB
POA LetterCover Letter(s)2022-11-10PDF 101.7 KB
Pro Installation DeclarationCover Letter(s)2022-11-10PDF 127.4 KB
TPC LetterCover Letter(s)2022-11-10PDF 126.8 KB
Confidentiality LetterCover Letter(s)2022-09-27PDF 133.7 KB
Dec Letter of Operation 6ID Metadata onlyCover Letter(s)2022-09-27PDF 114.8 KB
POA LetterCover Letter(s)2022-09-27PDF 88.2 KB
Professional Installation Dec LetterCover Letter(s)2022-09-27PDF 113.2 KB
MPE ReportRF Exposure Info2022-11-10PDF 519.6 KB
RF Exposure MPERF Exposure Info2022-09-27PDF 424.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 313.6 KB
Block Diagrams Metadata onlyBlock DiagramPDF 313.6 KB
Schematics Metadata onlySchematicsPDF 868.4 KB
[QXO-AP5010U] Schematics Metadata onlySchematicsPDF 868.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 149.3 KB
Op Desc Software Security Metadata onlySDR Software/Security InfPDF 128.2 KB
SW Security Op Description Metadata onlySDR Software/Security InfPDF 128.2 KB

Application Information

Application IDySFdlZAnR8UJHE6nBr0jCg==
Final Action Date2022-11-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019588359
ModelAP5010U
Frequency Range5180-5250 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAccess Point
Responsible PartyJohn Ballew, Senior Regulatory Compliance Manager, jballew@Extremenetworks.com , +1-603-952-5862
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/09/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20, 40, 80 and 160 MHz bandwidth modes. Class II Permissive Change: Adds master mode operation in U-NII Bands 2A and 2C via software update. Also enables 160 MHz operation.

Applications

Application IDDatePurpose
ySFdlZAnR8UJHE6nBr0jCg==2022-11-10Class II permissive change or modification of presently authorized equipment
ib6VVUAMDC6G3PgOvEDkkg==2022-09-27Original Equipment
hCnmgzl0klXcfaK5V/sOXQ==2022-09-27Original Equipment
XVmvBIWyFFvCTafEljj8YQ==2022-09-27Original Equipment
RlPQeSHdkm9fB2qoXzu5Gw==2022-09-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00215CCC
2405-2480 MHz0.00215CCC
2412-2462 MHz0.73815CCC, MO
5180-5240 MHz0.67115ECC, MO
5180-5250 MHz0.67115ECC, MO
5250-5320 MHz0.24715ECC, MO, ND
5500-5720 MHz0.24515ECC, MO, ND
5745-5825 MHz0.89115ECC, MO
5955-7095 MHz0.805000015ECC, EP, MO
6489.6-7987.2 MHz15FCC

Grants

TCB Grant - Application ySFdlZAnR8UJHE6nBr0jCg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/10/2022

Application Dated: 10/31/2022
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.671  
CC MO ND 15E 5250.0  -  5320.0 0.247  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.891  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20, 40, 80 and 160 MHz bandwidth modes.

Class II Permissive Change: Adds master mode operation in U-NII Bands 2A and 2C via software update. Also enables 160 MHz operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ySFdlZAnR8UJHE6nBr0jCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
United States
  Date of Grant: 11/10/2022

Application Dated: 10/31/2022
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.671  
CC MO ND 15E 5250.0  -  5320.0 0.247  
CC MO ND 15E 5500.0  -  5720.0 0.245  
CC MO 15E 5745.0  -  5825.0 0.891  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20, 40, 80 and 160 MHz bandwidth modes.

Class II Permissive Change: Adds master mode operation in U-NII Bands 2A and 2C via software update. Also enables 160 MHz operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application XVmvBIWyFFvCTafEljj8YQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/27/2022

Application Dated: 09/14/2022
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.738  
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2405.0  -  2480.0 0.002  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XVmvBIWyFFvCTafEljj8YQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
United States
  Date of Grant: 09/27/2022

Application Dated: 09/14/2022
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.738  
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2405.0  -  2480.0 0.002  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application RlPQeSHdkm9fB2qoXzu5Gw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/27/2022

Application Dated: 09/14/2022
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.805  

Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device 6 GHz operation is intended for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application RlPQeSHdkm9fB2qoXzu5Gw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
United States
  Date of Grant: 09/27/2022

Application Dated: 09/14/2022
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7095.0 0.805  

Power listed is EIRP. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80 and 160 MHz bandwidth modes. Device 6 GHz operation is intended for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ib6VVUAMDC6G3PgOvEDkkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/27/2022

Application Dated: 09/14/2022
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Ultra Wideband Transmitter
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15F 6489.6  -  7987.2  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ib6VVUAMDC6G3PgOvEDkkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
United States
  Date of Grant: 09/27/2022

Application Dated: 09/14/2022
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Ultra Wideband Transmitter
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15F 6489.6  -  7987.2  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hCnmgzl0klXcfaK5V/sOXQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/27/2022

Application Dated: 09/14/2022
Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.671  
CC MO 15E 5745.0  -  5825.0 0.891  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20, 40 and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application hCnmgzl0klXcfaK5V/sOXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
2121 RDU Center Drive
Morrisville, NC 27560
United States
  Date of Grant: 09/27/2022

Application Dated: 09/14/2022
 
Attention: John Ballew , Senior Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-AP5010U
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.671  
CC MO 15E 5745.0  -  5825.0 0.891  

Output Power listed is the maximum combined conducted output power. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 45 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports 20, 40 and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: