FCC ID QXO-AP5060

For pole or wall mount installations, this device must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

For under-seat or floor installations (model AP5060U only), RF exposure compliance for body exposure (under seat) configurations is limited installations establishing a minimum separation distance of 25 mm, as described in this filing. The highest reported SAR values for body, simultaneous transmission and product-specific (10g extremity SAR) use conditions are 0.68 W/kg, 1.53 W/kg and 1.60 W/kg, respectively.

This device supports 20, 40, 80, and 160 MHz bandwidth modes.

C2PC to add U-Nii-2A and U-Nii-2C bands, add 160MHz, and add 5G/6G MRU and Puncturing to device via Factory installed firmware.

For pole or wall mount installations, this device must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

For under-seat or floor installations (model AP5060U only), RF exposure compliance for body exposure (under seat) configurations is limited installations establishing a minimum separation distance of 25 mm, as described in this filing. The highest reported SAR values for body, simultaneous transmission and product-specific (10g extremity SAR) use conditions are 0.15 W/kg, 1.53 W/kg and 0.35 W/kg, respectively. The highest reported power density is 6.70 W/m2

Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, 160 and 320 MHz bandwidth modes.

For pole or wall mount installations, this device must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

For under-seat or floor installations (model AP5060U only), RF exposure compliance for body exposure (under seat) configurations is limited installations establishing a minimum separation distance of 25 mm, as described in this filing. The highest reported SAR values for body, simultaneous transmission and product-specific (10g extremity SAR) use conditions are 0.67 W/kg, 1.53 W/kg and 1.60 W/kg, respectively.

This device supports 20, 40 and 80 MHz bandwidth modes.

For pole or wall mount installations, this device must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

For under-seat or floor installations (model AP5060U only), RF exposure compliance for body exposure (under seat) configurations is limited installations establishing a minimum separation distance of 25 mm, as described in this filing. The highest reported SAR values for body, simultaneous transmission and product-specific (10g extremity SAR) use conditions are 0.37 W/kg, 1.46 W/kg and 0.53 W/kg, respectively.

This device supports 20 MHz bandwidth modes.

For pole or wall mount installations, this device must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

For under-seat or floor installations (model AP5060U only), RF exposure compliance for body exposure (under seat) configurations is limited installations establishing a minimum separation distance of 25 mm, as described in this filing. The highest reported SAR values for body, simultaneous transmission and product-specific (10g extremity SAR) use conditions are 0.15 W/kg, 1.53 W/kg and 0.35 W/kg, respectively. The highest reported power density is 6.70 W/m2

Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, 80, 160 and 320 MHz bandwidth modes.

C2PC to add U-Nii-2A and U-Nii-2C bands, add 160MHz, and add 5G/6G MRU and Puncturing to device via Factory installed firmware.