FCC ID QXO-AP510CX
Wireless Access Point
by Extreme Networks, Inc.
Grantee Code: QXO Product Code: AP510CX
Latest application date: 2021-05-01
FCC ID Device Details
| FCC ID | QXO-AP510CX |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QXO |
| Product Code | AP510CX |
| Applicant Business | Extreme Networks, Inc. 🇺🇸 |
| Related Domains |  extremenetworks.com |
| Equipment Class | Wireless Access Point |
| Test Firm | DEKRA Testing and Certification (Suzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-21 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: WBV-AP650X Grant Date: 08/28/2019 | 2020-06-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: WBV-AP650X Grant Date: 08/28/2019 | 2020-06-18 |
Exhibits
Application Information
| Application ID | rfmPdyGoZHLgKitLCmLGqg== |
|---|---|
| Final Action Date | 2021-05-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019588359 |
| Model | AP510CX |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Access Point |
| Responsible Party | Thomas Whissel, Regulatory Compliance Manager, whissel@Extremenetworks.com , +1-603-952-5861 |
| Test Firm | Janet Xu, DEKRA Testing and Certification (Suzhou) Co., Ltd., janet.xu@dekra.com  , 86 512 6251 50885113 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a C2PC to add new antennas. Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter.This device only works on Full RU under 802.11ax mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rfmPdyGoZHLgKitLCmLGqg== | 2021-05-01 | Class II permissive change or modification of presently authorized equipment |
| D2QfKM6NW9i3XLiJBQbgEg== | 2021-05-01 | Class II permissive change or modification of presently authorized equipment |
| iBwt2+sGTAQI2zI1amZruA== | 2020-07-21 | Class II permissive change or modification of presently authorized equipment |
| AvipECdznfkw3lNVfJXhkw== | 2020-07-21 | Class II permissive change or modification of presently authorized equipment |
| d9Xq58vXfMuAJxp/XRhD3w== | 2020-06-18 | Change in identification of presently authorized equipment. Original FCC ID: WBV-AP650X Grant Date: 08/28/2019 |
| d5vikb+zd5fVTK3wg7icow== | 2020-06-18 | Change in identification of presently authorized equipment. Original FCC ID: WBV-AP650X Grant Date: 08/28/2019 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0035 | 15C | CC |
| 2412-2462 MHz | 0.5105 | 15C | CC, MO |
| 2412-2462 MHz | 0.5559 | 15C | CC, MO |
| 5180-5240 MHz | 0.1109 | 15E | CC, MO |
| 5180-5240 MHz | 0.15 | 15E | CC, MO |
| 5260-5320 MHz | 0.2153 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.1321 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.2183 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.1545 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.2254 | 15E | CC, MO |
| 5745-5825 MHz | 0.4742 | 15E | CC, MO |
Grants
TCB Grant - Application rfmPdyGoZHLgKitLCmLGqg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/01/2021 Application Dated: 04/27/2021 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5559 |
| This is a C2PC to add new antennas. Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter.This device only works on Full RU under 802.11ax mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rfmPdyGoZHLgKitLCmLGqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 05/01/2021 Application Dated: 04/27/2021 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5559 |
| This is a C2PC to add new antennas. Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter.This device only works on Full RU under 802.11ax mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/21/2020 Application Dated: 07/03/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1321 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1545 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4742 |
| This is a C2PC to enable the generic SKU algorithm for geo-location. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4G WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iBwt2+sGTAQI2zI1amZruA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 07/21/2020 Application Dated: 07/03/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1321 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1545 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4742 |
| This is a C2PC to enable the generic SKU algorithm for geo-location. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4G WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1321 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1545 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4742 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4G WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application d9Xq58vXfMuAJxp/XRhD3w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.15 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1321 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1545 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4742 |
| Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4G WLAN and BLE transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5105 |
| Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application d5vikb+zd5fVTK3wg7icow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 06/18/2020 Application Dated: 06/18/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5105 |
| Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/01/2021 Application Dated: 04/27/2021 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1109 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2153 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2183 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2254 |
| This is a C2PC to add new antennas. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4GHz WLAN and BLE transmitter. This device only works on Full RU under 802.11ax mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application D2QfKM6NW9i3XLiJBQbgEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 05/01/2021 Application Dated: 04/27/2021 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1109 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2153 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.2183 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.2254 |
| This is a C2PC to add new antennas. Professional installation is required. Power Output listed is conducted. Device is an 802.11a/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80MHz and 160MHz bandwidth modes, it contains 2.4GHz WLAN and BLE transmitter. This device only works on Full RU under 802.11ax mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/21/2020 Application Dated: 07/03/2020 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5105 |
| This is a C2PC to enable the generic SKU algorithm for geo-location. Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AvipECdznfkw3lNVfJXhkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 07/21/2020 Application Dated: 07/03/2020 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-AP510CX |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0035 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.5105 |
| This is a C2PC to enable the generic SKU algorithm for geo-location. Power Output listed is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna (s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures and RF Exposure compliance. This device is an 802.11b/g/n/ac/ax device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 MHz and 40 MHz bandwidth modes, it contains 5G WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |