FCC ID QXO-CDR2G
802.11 b/g/n radio module
by Extreme Networks, Inc.
Grantee Code: QXO Product Code: CDR2G
Latest application date: 2017-08-21
FCC ID Device Details
| FCC ID | QXO-CDR2G |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QXO |
| Product Code | CDR2G |
| Applicant Business | Extreme Networks, Inc. 🇺🇸 |
| Related Domains |  extremenetworks.com |
| Equipment Class | 802.11 b/g/n radio module |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: UZ7CDR2G Grant Date: 02/01/2016 | 2017-08-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2017-08-21 | PDF 112.2 KB |
| Label Info | ID Label/Location Info | 2017-08-21 | PDF 17.5 KB |
| Change in ID Letter from New Applicant | Cover Letter(s) | 2017-08-21 | PDF 94.2 KB |
| Change in ID Letter from Original Applicant | Cover Letter(s) | 2017-08-21 | PDF 44.3 KB |
| POA | Cover Letter(s) | 2017-08-21 | PDF 93.2 KB |
Application Information
| Application ID | nvtZQQoQi6huIQaQs26FIg== |
|---|---|
| Final Action Date | 2017-08-21 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: UZ7CDR2G Grant Date: 02/01/2016 |
| Applicant FRN | 0019588359 |
| Model | CDR2G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g/n radio module |
| Responsible Party | Thomas Whissel, Regulatory Compliance Manager, whissel@Extremenetworks.com , +1-603-952-5861 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nvtZQQoQi6huIQaQs26FIg== | 2017-08-21 | Change in identification of presently authorized equipment. Original FCC ID: UZ7CDR2G Grant Date: 02/01/2016 |
Grants
TCB Grant - Application nvtZQQoQi6huIQaQs26FIg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/21/2017 Application Dated: 08/18/2017 |
| Extreme Networks, Inc. |
| 6480 Via Del Oro |
| San Jose, CA 95119 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-CDR2G |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.472 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nvtZQQoQi6huIQaQs26FIg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 United States |
Date of Grant: 08/21/2017 Application Dated: 08/18/2017 |
| Attention: Thomas Whissel , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QXO-CDR2G |
| Name of Grantee: | Extreme Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2412.0 - 2462.0 | 0.472 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |