FCC ID QYL3160NG
Wireless Module
by Getac Technology Corporation
Grantee Code: QYL Product Code: 3160NG
Latest application date: 2014-06-03
FCC ID Device Details
| FCC ID | QYL3160NG |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QYL |
| Product Code | 3160NG |
| Applicant Business | Getac Technology Corporation 🇹🇼 |
| Related Domains |  getac.com.tw |
| Equipment Class | Wireless Module |
| Test Firm | National Technical Systems |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 | 2014-06-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 | 2014-06-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 | 2014-06-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2014-12-01 | PDF 89.7 KB |
| Label & Location Info | ID Label/Location Info | 2014-06-03 | PDF 14 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2014-06-03 | PDF 20.7 KB |
| ID Change Authorization | Cover Letter(s) | 2014-06-03 | PDF 23.1 KB |
| ID Change Request | Cover Letter(s) | 2014-06-03 | PDF 18.6 KB |
| POA | Cover Letter(s) | 2014-06-03 | PDF 40.7 KB |
Application Information
| Application ID | c7SLBDy+pHlNU3/4tzFYXw== |
|---|---|
| Final Action Date | 2014-06-03 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 |
| Applicant FRN | 0018268243 |
| Model | 3160NG |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Module |
| Responsible Party | Kevin Chiang, kevin.chiang@getac.com.tw , +886-2-27857888 |
| Test Firm | David Bare, National Technical Systems, david.bare@nts.com  , 510-578-3500 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/01/2014 |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna to-antenna separation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| c7SLBDy+pHlNU3/4tzFYXw== | 2014-06-03 | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 |
| JlJ+C6BfJXtEqbya3apUBg== | 2014-06-03 | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 |
| 9lA7xPzrlE4ZtCQ7CwDh3A== | 2014-06-03 | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 |
| //KQXw5kdtwjsC92FhEqBw== | 2014-06-03 | Change in identification of presently authorized equipment. Original FCC ID: PD93160NG Grant Date: 06/26/2013 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0050000 | 15C | CC |
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2412-2462 MHz | 0.096 | 15C | CC |
| 2422-2452 MHz | 0.09 | 15C | CC |
| 5180-5240 MHz | 0.045 | 15E | CC |
| 5190-5230 MHz | 0.046 | 15E | CC |
| 5210 MHz | 0.012 | 15E | CC |
| 5260-5320 MHz | 0.054 | 15E | CC, ND |
| 5270-5310 MHz | 0.027 | 15E | CC, ND |
| 5290 MHz | 0.018 | 15E | CC, ND |
| 5500-5700 MHz | 0.047 | 15E | CC, ND |
| 5510-5710 MHz | 0.046 | 15E | CC, ND |
| 5530-5690 MHz | 0.03 | 15E | CC, ND |
| 5745-5825 MHz | 0.044 | 15C | CC |
| 5755-5795 MHz | 0.102 | 15C | CC |
| 5775 MHz | 0.121 | 15C | CC |
Grants
TCB Grant - Application JlJ+C6BfJXtEqbya3apUBg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JlJ+C6BfJXtEqbya3apUBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.046 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.012 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.054 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.027 | ||
| CC ND | 15E | 5290.0 - 5290.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.047 | ||
| CC ND | 15E | 5510.0 - 5710.0 | 0.046 | ||
| CC ND | 15E | 5530.0 - 5690.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application c7SLBDy+pHlNU3/4tzFYXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.046 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.012 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.054 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.027 | ||
| CC ND | 15E | 5290.0 - 5290.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.047 | ||
| CC ND | 15E | 5510.0 - 5710.0 | 0.046 | ||
| CC ND | 15E | 5530.0 - 5690.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.79 W/kg. Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9lA7xPzrlE4ZtCQ7CwDh3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna-to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.096 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.09 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.044 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.102 | ||
| CC | 15C | 5775.0 - 5775.0 | 0.121 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.65 W/kg. Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application //KQXw5kdtwjsC92FhEqBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 06/03/2014 Application Dated: 06/03/2014 |
| Attention: Kevin Chiang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYL3160NG |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.096 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.09 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.044 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.102 | ||
| CC | 15C | 5775.0 - 5775.0 | 0.121 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 8mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.65 W/kg. Simultaneous TX: 0.96W/kg with separation ratio of 0.02 at 50mm antenna to-antenna separation. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |