FCC ID QYL320GOBI3

WWAN Module

by Getac Technology Corporation

Grantee Code: QYL   Product Code: 320GOBI3
Latest application date: 2012-11-21

FCC ID Device Details

FCC IDQYL320GOBI3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQYL
Product Code320GOBI3
Applicant BusinessGetac Technology Corporation 🇹🇼
Related Domains mitac-mtc.com.tw
Equipment ClassWWAN Module
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2012-11-21
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NMC8355 Grant Date: 08/24/20102012-11-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-05-20PDF 5.4 MB
Internal PhotosInternal Photos2013-05-20PDF 5.1 MB
External PhotosExternal Photos2013-05-20PDF 817.7 KB
External PhotosExternal Photos2013-05-11PDF 173.1 KB
Label - HostID Label/Location Info2012-11-21PDF 32.2 KB
Label LocationID Label/Location Info2012-11-21PDF 20.7 KB
LabelID Label/Location Info2012-11-12PDF 735.9 KB
Label LocationID Label/Location Info2012-11-12PDF 11.7 KB
Confidentiality Request ShorttermCover Letter(s)2012-11-21PDF 28.7 KB
Cover Letter - Agent AuthorizationCover Letter(s)2012-11-21PDF 26.3 KB
Cover Letter - Class II Permissive ChangeCover Letter(s)2012-11-21PDF 32.1 KB
Cover Letter - DoCCover Letter(s)2012-11-21PDF 22.3 KB
Confidentiality RequestCover Letter(s)2012-11-12PDF 28.7 KB
Cover Letter - Authorization for Change in IDCover Letter(s)2012-11-12PDF 14 KB
Cover Letter - Change in ID RequestCover Letter(s)2012-11-12PDF 26.1 KB
RF Exposure InfoRF Exposure Info2012-11-21PDF 110.1 KB

Application Information

Application IDlOwpgUl60D1jJYoQaUqHOA==
Final Action Date2012-11-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018268243
Model320GOBI3
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionWWAN Module
Responsible PartyCelina Chen, Agency Specialist, celina.chen@mitac-mtc.com.tw , +886-2-27857888
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/20/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for adding a portable NB host (Getac NB, Model: B320) as described in this filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
lOwpgUl60D1jJYoQaUqHOA==2012-11-21Class II permissive change or modification of presently authorized equipment
TNW4q41sKuHRwp7D3iCwag==2012-11-12Change in identification of presently authorized equipment. Original FCC ID: N7NMC8355 Grant Date: 08/24/2010

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz2.012.5ppm248KGXW22HBC
824.2-848.8 MHz0.5312.5ppm248KG7W22HBC
824.7-848.31 MHz0.292.5ppm1M28F9W22HBC
826.4-846.6 MHz0.2812.5ppm4M19F9W22HBC
1712.4-1752.6 MHz0.2872.5ppm4M15F9W27
1712.4-1752.6 MHz0.2872.5ppm4M15F9W27BC
1850.2-1909.8 MHz1.1992.5ppm250KGXW24EBC
1850.2-1909.8 MHz0.5372.5ppm245KG7W24EBC
1851.25-1908.75 MHz0.2872.5ppm1M28F9W24EBC
1852.4-1907.5 MHz0.2942.5ppm4M19F9W24EBC

Grants

TCB Grant - Application TNW4q41sKuHRwp7D3iCwag==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Celina Chen , Agency Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYL320GOBI3
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: WWAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 2.01 2.5  PM 248KGXW
BC 22H 824.2  -  848.8 0.531 2.5  PM 248KG7W
BC 22H 826.4  -  846.6 0.281 2.5  PM 4M19F9W
BC 22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
BC 24E 1850.2  -  1909.8 1.199 2.5  PM 250KGXW
BC 24E 1850.2  -  1909.8 0.537 2.5  PM 245KG7W
BC 24E 1852.4  -  1907.5 0.294 2.5  PM 4M19F9W
BC 24E 1851.25  -  1908.75 0.287 2.5  PM 1M28F9W
BC 27 1712.4  -  1752.6 0.287 2.5  PM 4M15F9W

Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application TNW4q41sKuHRwp7D3iCwag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Celina Chen , Agency Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYL320GOBI3
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: WWAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 2.01 2.5  PM 248KGXW
BC 22H 824.2  -  848.8 0.531 2.5  PM 248KG7W
BC 22H 826.4  -  846.6 0.281 2.5  PM 4M19F9W
BC 22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
BC 24E 1850.2  -  1909.8 1.199 2.5  PM 250KGXW
BC 24E 1850.2  -  1909.8 0.537 2.5  PM 245KG7W
BC 24E 1852.4  -  1907.5 0.294 2.5  PM 4M19F9W
BC 24E 1851.25  -  1908.75 0.287 2.5  PM 1M28F9W
BC 27 1712.4  -  1752.6 0.287 2.5  PM 4M15F9W

Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application lOwpgUl60D1jJYoQaUqHOA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/21/2012

Application Dated: 11/21/2012
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Celina Chen , Agency Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYL320GOBI3
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: WWAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 2.01 2.5  PM 248KGXW
BC 22H 824.2  -  848.8 0.531 2.5  PM 248KG7W
BC 22H 826.4  -  846.6 0.281 2.5  PM 4M19F9W
BC 22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
BC 24E 1850.2  -  1909.8 1.199 2.5  PM 250KGXW
BC 24E 1850.2  -  1909.8 0.537 2.5  PM 245KG7W
BC 24E 1852.4  -  1907.5 0.294 2.5  PM 4M19F9W
BC 24E 1851.25  -  1908.75 0.287 2.5  PM 1M28F9W
27 1712.4  -  1752.6 0.287 2.5  PM 4M15F9W

Class II Permissive Change for adding a portable NB host (Getac NB, Model: B320) as described in this filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application lOwpgUl60D1jJYoQaUqHOA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 11/21/2012

Application Dated: 11/21/2012
 
Attention: Celina Chen , Agency Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYL320GOBI3
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: WWAN Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 2.01 2.5  PM 248KGXW
BC 22H 824.2  -  848.8 0.531 2.5  PM 248KG7W
BC 22H 826.4  -  846.6 0.281 2.5  PM 4M19F9W
BC 22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
BC 24E 1850.2  -  1909.8 1.199 2.5  PM 250KGXW
BC 24E 1850.2  -  1909.8 0.537 2.5  PM 245KG7W
BC 24E 1852.4  -  1907.5 0.294 2.5  PM 4M19F9W
BC 24E 1851.25  -  1908.75 0.287 2.5  PM 1M28F9W
27 1712.4  -  1752.6 0.287 2.5  PM 4M15F9W

Class II Permissive Change for adding a portable NB host (Getac NB, Model: B320) as described in this filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: