FCC ID QYLAP6234E

WLAN module

by Getac Technology Corporation

Grantee Code: QYL   Product Code: AP6234E
Latest application date: 2017-05-15

Device Images

FCC ID Device Details

FCC IDQYLAP6234E
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQYL
Product CodeAP6234E
Applicant BusinessGetac Technology Corporation 🇹🇼
Related Domains getac.com.tw
Equipment ClassWLAN module
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-05-15
2402-2480 MHzOriginal Equipment2017-05-15
2402-2480 MHzOriginal Equipment2017-05-15

Exhibits

DocumentTypeAvailableFile
User Manual HostUsers Manual2017-11-11PDF 519.3 KB
User Manual ModuleUsers Manual2017-11-11PDF 828.4 KB
Internal PhotosInternal Photos2017-11-11PDF 2.3 MB
External PhotosExternal Photos2017-11-11PDF 2.9 MB
Label Info ModuleID Label/Location Info2017-05-15PDF 35.2 KB
Label Location HostID Label/Location Info2017-05-15PDF 26.2 KB
Label Sample HostID Label/Location Info2017-05-15PDF 118.2 KB
Test Set Up Photos DSSTest Setup Photos2017-11-11PDF 637.8 KB
Test Set Up Photos DTS BT LETest Setup Photos2017-11-11PDF 643.8 KB
Test Setup Photos DFSTest Setup Photos2017-11-11PDF 184.6 KB
Test Setup Photos DTS WLAN 2.4GTest Setup Photos2017-11-11PDF 617.6 KB
Test Setup Photos NII 5G B1-3Test Setup Photos2017-11-11PDF 661.5 KB
Test Setup Photos NII 5G B4Test Setup Photos2017-11-11PDF 659.7 KB
Test Setup Photos RF Exp.Test Setup Photos2017-11-11PDF 84.1 KB
Test Report DFSTest Report2017-05-15PDF 730 KB
Test Report DSSTest Report2017-05-15PDF 2.6 MB
Test Report DTS BT LETest Report2017-05-15PDF 1.9 MB
Test Report DTS WLAN 2.4GTest Report2017-05-15PDF 3.3 MB
Test Report NII 5G B1-3Test Report2017-05-15PDF 4.9 MB
Test Report NII 5G B4Test Report2017-05-15PDF 2.3 MB
Confidentiality Request (LTC+STC)Cover Letter(s)2017-05-15PDF 235.7 KB
Modular Approval LetterCover Letter(s)2017-05-15PDF 44.8 KB
POACover Letter(s)2017-05-15PDF 226.6 KB
RF Exp Appendix ARF Exposure Info2017-05-15PDF 414.5 KB
RF Exp Appendix BRF Exposure Info2017-05-15PDF 395.7 KB
RF Exp Appendix CRF Exposure Info2017-05-15PDF 3 MB
RF ExposureRF Exposure Info2017-05-15PDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 123.2 KB
Block Diagram Module Metadata onlyBlock DiagramPDF 41.3 KB
Schematics Metadata onlySchematicsPDF 1.4 MB
Schematics Module Metadata onlySchematicsPDF 276.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 828.4 KB
Software Security Operational Description Metadata onlySDR Software/Security InfPDF 103.6 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 83.2 KB

Application Information

Application IDdV2FBC6K7ETM18QPtIY7oQ==
Final Action Date2017-05-15
Application PurposeOriginal Equipment
Applicant FRN0018268243
ModelAP6234E
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN module
Responsible PartyKevin Chiang, kevin.chiang@getac.com.tw , +886-2-27857888
Test FirmAlex Chen, SPORTON International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/11/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR is 0.78 W/kg. This device supports 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
dV2FBC6K7ETM18QPtIY7oQ==2017-05-15Original Equipment
II+N927Kl/Y/Vr4ahUBt7w==2017-05-15Original Equipment
/+5G16pBnDClbfdeSzXJ7Q==2017-05-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002115CCC
2402-2480 MHz0.002700015CCC
2412-2462 MHz0.214315CCC
5180-5240 MHz0.012415E38, CC
5260-5320 MHz0.012215E38, CC
5500-5700 MHz0.014615E38, CC
5745-5805 MHz0.01315E38, CC

Grants

TCB Grant - Application II+N927Kl/Y/Vr4ahUBt7w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/15/2017

Application Dated: 05/12/2017
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application II+N927Kl/Y/Vr4ahUBt7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 05/15/2017

Application Dated: 05/12/2017
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dV2FBC6K7ETM18QPtIY7oQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/15/2017

Application Dated: 05/12/2017
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0124  
38 CC 15E 5260.0  -  5320.0 0.0122  
38 CC 15E 5500.0  -  5700.0 0.0146  
38 CC 15E 5745.0  -  5805.0 0.013  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR is 0.78 W/kg. This device supports 20 MHz and 40 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application dV2FBC6K7ETM18QPtIY7oQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 05/15/2017

Application Dated: 05/12/2017
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0124  
38 CC 15E 5260.0  -  5320.0 0.0122  
38 CC 15E 5500.0  -  5700.0 0.0146  
38 CC 15E 5745.0  -  5805.0 0.013  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR is 0.78 W/kg. This device supports 20 MHz and 40 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /+5G16pBnDClbfdeSzXJ7Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/15/2017

Application Dated: 05/12/2017
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Digital Transmission System
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC 15C 2412.0  -  2462.0 0.2143  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR is 0.26 W/kg. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /+5G16pBnDClbfdeSzXJ7Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 05/15/2017

Application Dated: 05/12/2017
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLAP6234E
Name of Grantee:  Getac Technology Corporation
Equipment Class: Digital Transmission System
Notes: WLAN module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0021  
CC 15C 2412.0  -  2462.0 0.2143  

Limited Single Modular Approval . Output Power listed is the maximum conducted output power. This transmitter is approved for use in portable RF exposure category when installed in Getac Tablet Model EX80. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR is 0.26 W/kg. This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: